无线技术 AP

无线技术 AP

FAT AP

和FIT AP 的区别

1. 将WLAN的物理层、用户数据加密、用户认证、QoS、网络管理、漫游技术以及其他应用层的功能集于一身。
2. Fat AP无线网络解决方案可由Fat AP直接在有线网的基础上构成。
3. Fat AP设备结构复杂，且难于集中管理。

配置方案：

FIT AP

和FAT AP 的区别

1. 它是一个只有加密、射频功能的AP，功能单一，不能独立工作。
2. 整个Fit AP无线网络解决方案由AC和Fit AP在有线网的基础上构成。
3. Fit AP上零配置，所有配置都集中到AC上。这也促成了Fit AP解决方案更加便于集中管理，并由此具有三层漫游、基于用户下发权限等Fat AP不具备的功能。

配置方案：

The device is running!
<AC6605>sys
Enter system view, return user view with Ctrl+Z.
[AC6605]sys AC1
################配置VLAN1路由信息并启用并应用DHCP到vlan1
[AC1]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[AC1]interface vlan 1
[AC1-Vlanif1]ip ad 192.168.0.1 24
[AC1-Vlanif1]dhcp select interface                              //应用到此端口，如改成global则全局应用
[AC1-Vlanif1]q

################指定与AP建立管理隧道的源接口
[AC1]capwap source int vlan 1

################注册AP
[AC1]dis ap unauthorized record                                 //查看未注册的设备记录
Unauthorized AP record:
Total number: 1
--------------------------------------------------------------------------------
AP type: AP3030DN
AP SN: 210235448310DB4B8D16
AP MAC address: 00e0-fc87-3c00
AP IP address: 192.168.0.4
Record time: 2020-04-24 10:35:01
--------------------------------------------------------------------------------
[AC1]wlan	
[AC1-wlan-view]ap-id 1 ap-mac 00e0-fc87-3c00                   //绑定ap-id 进程到对应ap的MAC地址
[AC1-wlan-ap-1]ap-name AP1		                  
[AC1-wlan-ap-1]q
[AC1-wlan-view]dis ap all                                      //查看已注册的设备
Info: This operation may take a few seconds. Please wait for a moment.done.
Total AP information:
nor  : normal          [1]
--------------------------------------------------------------------------------
--------
ID   MAC            Name Group   IP          Type            State STA Uptime
--------------------------------------------------------------------------------
--------
1    00e0-fc87-3c00 AP1  default 192.168.0.4 AP3030DN        nor   0   7S
--------------------------------------------------------------------------------
--------
Total: 1                                                       //state 如为 nor 则正常

################配置无线网络信息
[AC1-wlan-view]ssid-profile name V1                            //SSID文件档名
[AC1-wlan-ssid-prof-V1]SSID WIFI                               //SSID为 wifi
Info: This operation may take a few seconds, please wait.done.
[AC1-wlan-ssid-prof-V1]q
[AC1-wlan-view]security-profile name V2                        //安全文件档名
[AC1-wlan-sec-prof-V2]q                                 
[AC1-wlan-view]vap-profile name V                              //进入虚拟访问点文件档 V
[AC1-wlan-vap-prof-V]ssid-profile V1                           //导入SSID文件档 V1
Info: This operation may take a few seconds, please wait.done.
[AC1-wlan-vap-prof-V]security-profile V2                       //导入安全文件档 V2
Info: This operation may take a few seconds, please wait.done.
[AC1-wlan-vap-prof-V]q

################下发WLAN
[AC1-wlan-view]ap-id 1                                        //进入ap进程1 
[AC1-wlan-ap-1]vap-profile V wlan 1 radio 0 //绑定虚拟访问点V、wlan1、Radio0
[AC1-wlan-ap-1]q
[AC1-wlan-view]q


<AC1>save
  The current configuration will be written to the device. 
  Are you sure to continue? (y/n)[n]:y
  It will take several minutes to save configuration file, please wait.......
  Configuration file has been saved successfully
  Note: The configuration file will take effect after being activated