3.4 利用单臂路由实现VLAN间路由

 

[S2]vlan 10
[S2-vlan10]description HR
[S2-vlan10]vlan 20
[S2-vlan20]description Market
[S2-vlan20]int e0/0/1
[S2-Ethernet0/0/1]port link-type access
[S2-Ethernet0/0/1]port default vlan 10
[S2-Ethernet0/0/1]int e0/0/2
[S2-Ethernet0/0/2]port link-type access
[S2-Ethernet0/0/2]port default vlan 20
[S2-Ethernet0/0/2]int g0/0/2
[S2-GigabitEthernet0/0/2]port link-type trunk
[S2-GigabitEthernet0/0/2]port trunk allow-pass vlan all
[S2-GigabitEthernet0/0/2]

[S3]vlan 30
[S3-vlan30]description Manager
[S3-vlan30]
[S3-vlan30]int e0/0/1
[S3-Ethernet0/0/1]port link-type access
[S3-Ethernet0/0/1]port default vlan 30
[S3-Ethernet0/0/1]int g0/0/2
[S3-GigabitEthernet0/0/2]port link-type trunk 
[S3-GigabitEthernet0/0/2]port trunk allow-pass vlan all

[S1]vlan batch 10 20 30
[S1]int g0/0/1
[S1-GigabitEthernet0/0/1]port link-type trunk
[S1-GigabitEthernet0/0/1]port trunk allow-pass vlan all
[S1-GigabitEthernet0/0/1]int g0/0/2
[S1-GigabitEthernet0/0/2]port link-type trunk
[S1-GigabitEthernet0/0/2]port trunk allow-pass vlan all
[S1-GigabitEthernet0/0/2]int g0/0/3
[S1-GigabitEthernet0/0/3]port link-type trunk
[S1-GigabitEthernet0/0/3]port trunk allow-pass vlan all

#配置R1的逻辑子接口
[R1]int g0/0/1.1
[R1-GigabitEthernet0/0/1.1]ip address 192.168.1.254 24
#配置子接口对一层tag报文的终结功能
[R1-GigabitEthernet0/0/1.1]dot1q termination vid 10
#开启子接口的ARP广播功能
[R1-GigabitEthernet0/0/1.1]arp broadcast enable
[R1-GigabitEthernet0/0/1.1]int g0/0/1.2
[R1-GigabitEthernet0/0/1.2]ip address 192.168.2.254 24
[R1-GigabitEthernet0/0/1.2]dot1q termination vid 20
[R1-GigabitEthernet0/0/1.2]arp broadcast enable
[R1-GigabitEthernet0/0/1.2]int g0/0/1.3
[R1-GigabitEthernet0/0/1.3]ip address 192.168.3.254 24
[R1-GigabitEthernet0/0/1.3]dot1q termination vid 30
[R1-GigabitEthernet0/0/1.3]arp broadcast enable