AD转化（简单代码）

xpt2046芯片

#include<reg52.h>
#include<intrins.h>
#define AD_CH0 0x94 //通道0光敏cmd
#define AD_CH1 0xd4	//通道1热敏cmd
#define AD_CH2 0xa4	//通道2电位器cmd
#define AD_CH3 0xe4	//通道3外部输入AIN3 cmd
typedef unsigned char uchar;
typedef unsigned int uint;
#define MAIN_Fosc  11059200UL  //宏定义主时钟HZ
sbit DIN=P2^0;
sbit DCLK=P2^1;
sbit DOUT=P2^5;
sbit CS=P3^7;
sbit WE=P2^7;	//段选
sbit DU=P2^6;	//位选
//共阴数码管段选表0-9
uchar code SMGduan[]= {0x3F, 0x06, 0x5B, 0x4F, 0x66, 0x6D, 0x7D, 0x07, 0x7F, 0x6F,};
//数码管位选码
uchar code SMGwei[] = {0xfe, 0xfd, 0xfb, 0xf7};
//毫秒级延时函数
void delay(uint ms)
{
	uint i;
	do
	{
		i=MAIN_Fosc/96000;
		while(--i);	
	}while(--ms);
}
//显示函数
void display(uint i)
{
	uchar q, b, s, g;
	static uchar wei;
	q = i / 1000;
	b = i % 1000 / 100;
	s = i % 100 / 10;
	g = i % 10;		
	P0 = 0XFF;//清除断码
	WE = 1;//打开位选锁存器
	P0 = SMGwei[wei];
	WE = 0;//锁存位选数据
	P0 = 0XFF;//清除断码
	switch(wei)
	{
		case 0: DU = 1; P0 = SMGduan[q] | 0x80;	DU = 0; break;//0x80加上小数点
		case 1: DU = 1; P0 = SMGduan[b]; 	DU = 0; break;	
		case 2: DU = 1; P0 = SMGduan[s]; 	DU = 0; break;
		case 3: DU = 1; P0 = SMGduan[g]; 	DU = 0; break;		
	}
	wei++;
	if(wei == 4)
		wei = 0;
}
//写入命令
void SPI_Write(uchar DAT)
{
	uchar i;
	for(i=0;i<8;i++)	 //命令按位依次写入
	{
		DCLK=0;
		if(DAT&0x80)
			DIN=1;
		else
			DIN=0;
		DCLK=1;
		DAT<<=1;
	}
}
//读出数据
uint SPI_Read()
{
	uint i,DAT;
	for(i=0;i<12;i++)	//依次读出每一位数据并反馈
	{
		DAT<<=1;
		DCLK=1;
		DCLK=0;
		if(DOUT)
			DAT|=0x01;
	}
	return DAT;
}
//AD读取指定数据
uint Read_AD(uchar cmd)
{
	uint DAT;
	CS=0;
	SPI_Write(cmd);
	DCLK=0;
	_nop_();
	_nop_();
	_nop_();
	_nop_();
	_nop_();
	DAT=SPI_Read();
	CS=1;
	return DAT;
}
void main()
{
	uint i,date;
	while(1)
	{
		if(i>=100)
		{
			i=0;
			date=Read_AD(AD_CH1); //接收
			date=date*1.2207;	 //数值转换
		}
		display(date);	  //显示反馈值
		delay(5);
		i++;
	}
}