vtp配置实验

#vtp配置实验

pc3:192.168.0.1。pc4：192.168.1.1。pc5：192.168.0.2。pc6：192.168.1.2
直接上代码
左边交换机：
Switch>en
Switch#vlan da
Switch#vlan database
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode.

Switch(vlan)#vtp do
% Incomplete command.
Switch(vlan)#vtp do
Switch(vlan)#vtp domain 305
Changing VTP domain name from NULL to 305
Switch(vlan)#vtp se
Switch(vlan)#vtp server
Device mode already VTP SERVER.
Switch(vlan)#exit
APPLY completed.
Exiting…
Switch#conf
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 2
Switch(config-vlan)#exit
Switch(config)#vlan 3
Switch(config-vlan)#^Z
Switch#
%SYS-5-CONFIG_I: Configured from console by console

Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#int f0/24
Switch(config-if)#sw
Switch(config-if)#switchport mot
Switch(config-if)#switchport mo
Switch(config-if)#switchport mode tr
Switch(config-if)#switchport mode trunk

Switch(config-if)#
Switch(config)#int ra
Switch(config)#int range f0/1-8
Switch(config-if-range)#sw
Switch(config-if-range)#switchport acc
Switch(config-if-range)#switchport access vlan 2
Switch(config-if-range)#exit
Switch(config)#int range f0/9-16
Switch(config-if-range)#sw acc vlan 3
Switch(config-if-range)#exit
右边交换机：
Switch>en
Switch#vlan da
Switch#vlan database
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode.

Switch(vlan)#vtp do
Switch(vlan)#vtp domain 305
Changing VTP domain name from NULL to 305
Switch(vlan)#vtp cl
Switch(vlan)#vtp client
Setting device to VTP CLIENT mode.
Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#int range f0/1-8
Switch(config-if-range)#sw
Switch(config-if-range)#switchport acc
Switch(config-if-range)#switchport access vlan 2
Switch(config-if-range)#exit
Switch(config)#int range f0/9-16
Switch(config-if-range)#switchport access vlan 3
Switch(config-if-range)#exit