【Linux常用命令】strace命令

strace 命令介绍

strace 常用来跟踪进程执行时的系统调用和所接收的信号。 在Linux世界，进程不能直接访问硬件设备，当进程需要访问硬件设备(比如读取磁盘文件，接收网络数据等等)时，必须由用户态模式切换至内核态模式，通过系统调用访问硬件设备。strace可以跟踪到一个进程产生的系统调用,包括参数，返回值，执行消耗的时间。

1.使用格式

只要在原本命令的前面，加上 strace 关键字，我们就可以看到原本要执行的这个命令到底做了什么

2.参数讲解

-c 统计每一系统调用的所执行的时间,次数和出错的次数等.
-d 输出strace关于标准错误的调试信息.
-f 跟踪由fork调用所产生的子进程.
-ff 如果提供-o filename,则所有进程的跟踪结果输出到相应的filename.pid中,pid是各进程的进程号.
-F 尝试跟踪vfork调用.在-f时,vfork不被跟踪.
-h 输出简要的帮助信息.
-i 输出系统调用的入口指针.
-q 禁止输出关于脱离的消息.
-r 打印出相对时间关于,,每一个系统调用.
-t 在输出中的每一行前加上时间信息.
-tt 在输出中的每一行前加上时间信息,微秒级.
-ttt 微秒级输出,以秒了表示时间.
-T 显示每一调用所耗的时间.
-v 输出所有的系统调用.一些调用关于环境变量,状态,输入输出等调用由于使用频繁,默认不输出.
-V 输出strace的版本信息.
-x 以十六进制形式输出非标准字符串
-xx 所有字符串以十六进制形式输出.
-a column
设置返回值的输出位置.默认 为40.
-e expr
指定一个表达式,用来控制如何跟踪.格式如下:
[qualifier=][!]value1[,value2]...
qualifier只能是 trace,abbrev,verbose,raw,signal,read,write其中之一.value是用来限定的符号或数字.默认的 qualifier是 trace.感叹号是否定符号.例如:
-eopen等价于 -e trace=open,表示只跟踪open调用.而-etrace!=open表示跟踪除了open以外的其他调用.有两个特殊的符号 all 和 none.
注意有些shell使用!来执行历史记录里的命令,所以要使用\\.
-e trace=set
只跟踪指定的系统 调用.例如:-e trace=open,close,rean,write表示只跟踪这四个系统调用.默认的为set=all.
-e trace=file
只跟踪有关文件操作的系统调用.
-e trace=process
只跟踪有关进程控制的系统调用.
-e trace=network
跟踪与网络有关的所有系统调用.
-e strace=signal
跟踪所有与系统信号有关的 系统调用
-e trace=ipc
跟踪所有与进程通讯有关的系统调用
-e abbrev=set
设定 strace输出的系统调用的结果集.-v 等与 abbrev=none.默认为abbrev=all.
-e raw=set
将指 定的系统调用的参数以十六进制显示.
-e signal=set
指定跟踪的系统信号.默认为all.如 signal=!SIGIO(或者signal=!io),表示不跟踪SIGIO信号.
-e read=set
输出从指定文件中读出 的数据.例如:
-e read=3,5
-e write=set
输出写入到指定文件中的数据.
-o filename
将strace的输出写入文件filename
-p pid
跟踪指定的进程pid.
-s strsize
指定输出的字符串的最大长度.默认为32.文件名一直全部输出.
-u username
以username 的UID和GID执行被跟踪的命令

3.案例

3.1 下面就是一个追踪 df 命令的例子

$ strace df -h
execve("/bin/df", ["df", "-h"], [/* 50 vars */]) = 0
brk(NULL)                               = 0x136e000
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f82f78fd000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=147662, ...}) = 0
mmap(NULL, 147662, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f82f78d8000
close(3)                                = 0
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
open("/lib/x86_64-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P\t\2\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1868984, ...}) = 0
mmap(NULL, 3971488, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f82f7310000

结果非常容易理解，可以看到，每一行都是一个系统调用，比如：

open(“/etc/ld.so.cache”, O_RDONLY|O_CLOEXEC) = 3

其中：

open: 系统调用名
("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) : 系统调用的参数
3: 系统调用的返回结果

3.2 只追踪特定的系统调用

上述 df -h 的 strace 结果是非常多的，从中比较难以找到我们真正关心的调用，通过 -e trace 参数，通过传入不同的参数值，就可以过滤出想要的结果了。

$ sudo strace -e trace=write df -h
write(1, "Filesystem      Size  Used Avail"..., 49Filesystem      Size  Used Avail Use% Mounted on
) = 49
write(1, "udev            3.9G     0  3.9G"..., 43udev            3.9G     0  3.9G   0% /dev
) = 43
write(1, "tmpfs           788M  9.6M  779M"..., 43tmpfs           788M  9.6M  779M   2% /run
) = 43
write(1, "/dev/sda10      324G  252G   56G"..., 40/dev/sda10      324G  252G   56G  82% /
) = 40
write(1, "tmpfs           3.9G  104M  3.8G"..., 47tmpfs           3.9G  104M  3.8G   3% /dev/shm
) = 47
write(1, "tmpfs           5.0M  4.0K  5.0M"..., 48tmpfs           5.0M  4.0K  5.0M   1% /run/lock
) = 48
write(1, "tmpfs           3.9G     0  3.9G"..., 53tmpfs           3.9G     0  3.9G   0% /sys/fs/cgroup
) = 53
write(1, "cgmfs           100K     0  100K"..., 56cgmfs           100K     0  100K   0% /run/cgmanager/fs
) = 56
write(1, "tmpfs           788M   28K  788M"..., 53tmpfs           788M   28K  788M   1% /run/user/1000
) = 53
+++ exited with 0 +++

除此以外，你还可以传入：

$ sudo strace -e trace=open,close df -h
sudo strace -e trace=open,close,read,write df -h
sudo strace -e trace=all df -h

3.3 针对进行管理的追踪

 sudo strace -q -e trace=process df -h    
execve("/bin/df", ["df", "-h"], [/* 17 vars */]) = 0
arch_prctl(ARCH_SET_FS, 0x7fe2222ff700) = 0
Filesystem      Size  Used Avail Use% Mounted on
udev            3.9G     0  3.9G   0% /dev
tmpfs           788M  9.6M  779M   2% /run
/dev/sda10      324G  252G   56G  82% /
tmpfs           3.9G  104M  3.8G   3% /dev/shm
tmpfs           5.0M  4.0K  5.0M   1% /run/lock
tmpfs           3.9G     0  3.9G   0% /sys/fs/cgroup
cgmfs           100K     0  100K   0% /run/cgmanager/fs
tmpfs           788M   28K  788M   1% /run/user/1000
exit_group(0)                           = ?
+++ exited with 0 +++

3.4 针对文件系统调用的追踪

sudo strace -q  -e trace=file df -h
execve("/bin/df", ["df", "-h"], [/* 17 vars */]) = 0
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
open("/lib/x86_64-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
open("/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3
open("/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3

3.5 针对内存的追踪

sudo strace -q -e trace=memory df -h    
brk(NULL)                               = 0x77a000
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe8f4658000
mmap(NULL, 147662, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fe8f4633000
mmap(NULL, 3971488, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe8f406b000
mprotect(0x7fe8f422b000, 2097152, PROT_NONE) = 0
mmap(0x7fe8f442b000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1c0000) = 0x7fe8f442b000
mmap(0x7fe8f4431000, 14752, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fe8f4431000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe8f4632000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe8f4631000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe8f4630000
mprotect(0x7fe8f442b000, 16384, PROT_READ) = 0
mprotect(0x616000, 4096, PROT_READ)     = 0
mprotect(0x7fe8f465a000, 4096, PROT_READ) = 0
munmap(0x7fe8f4633000, 147662)          = 0
mmap(NULL, 2981280, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fe8f3d93000
brk(NULL)                               = 0x77a000
brk(0x79b000)                           = 0x79b000
mmap(NULL, 619, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fe8f4657000
mmap(NULL, 26258, PROT_READ, MAP_SHARED, 3, 0) = 0x7fe8f4650000
Filesystem      Size  Used Avail Use% Mounted on
udev            3.9G     0  3.9G   0% /dev
tmpfs           788M  9.6M  779M   2% /run
/dev/sda10      324G  252G   56G  82% /
tmpfs           3.9G  104M  3.8G   3% /dev/shm
tmpfs           5.0M  4.0K  5.0M   1% /run/lock
tmpfs           3.9G     0  3.9G   0% /sys/fs/cgroup
cgmfs           100K     0  100K   0% /run/cgmanager/fs
tmpfs           788M   28K  788M   1% /run/user/1000
+++ exited with 0 +++

3.6 针对网络的追踪

sudo strace -e trace=network df -h

3.7 针对信号的追踪

sudo strace -e trace=signal df -h

3.8 根据进程PID进行追踪

如果一个进程已经在运行，你可以通过它的pid进行追踪，它会显示追踪后这个进程的系统调用。

 sudo strace -p 3569
strace: Process 3569 attached
restart_syscall(<... resuming interrupted poll ...>) = 1
recvmsg(4, {msg_name(0)=NULL, msg_iov(1)=[{"U\2\24\300!\247\330\0\3\24\4\0\20\0\0\0\0\0\0\24\24\24\24\24\0\0\3\37%\2\0\0", 4096}], msg_controllen=0, msg_flags=0}, 0) = 32
recvmsg(4, 0x7ffee4dbf870, 0)           = -1 EAGAIN (Resource temporarily unavailable)
recvmsg(4, 0x7ffee4dbf850, 0)           = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=3, events=POLLIN}, {fd=4, events=POLLIN}, {fd=5, events=POLLIN}, {fd=10, events=POLLIN}, {fd=30, events=POLLIN}, {fd=31, events=POLLIN}], 6, -1) = 1 ([{fd=31, revents=POLLIN}])
read(31, "\372", 1)                     = 1
recvmsg(4, 0x7ffee4dbf850, 0)           = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=3, events=POLLIN}, {fd=4, events=POLLIN}, {fd=5, events=POLLIN}, {fd=10, events=POLLIN}, {fd=30, events=POLLIN}, {fd=31, events=POLLIN}], 6, 0) = 1 ([{fd=31, revents=POLLIN}])
read(31, "\372", 1)                     = 1
recvmsg(4, 0x7ffee4dbf850, 0)           = -1 EAGAIN (Resource temporarily unavailable)
poll([{fd=3, events=POLLIN}, {fd=4, events=POLLIN}, {fd=5, events=POLLIN}, {fd=10, events=POLLIN}, {fd=30, events=POLLIN}, {fd=31, events=POLLIN}], 6, 0) = 0 (Timeout)
mprotect(0x207faa20000, 8192, PROT_READ|PROT_WRITE) = 0
mprotect(0x207faa20000, 8192, PROT_READ|PROT_EXEC) = 0
mprotect(0x207faa21000, 4096, PROT_READ|PROT_WRITE) = 0
mprotect(0x207faa21000, 4096, PROT_READ|PROT_EXEC) = 0

3.9 得到进程的汇总信息

sudo strace -c -p 3569
strace: Process 3569 attached
^Cstrace: Process 3569 detached
% time     seconds  usecs/call     calls    errors syscall

99.73    0.016000           8      1971           poll
0.16    0.000025           0       509        75 futex
0.06    0.000010           0      1985      1966 recvmsg
0.06    0.000009           0      2336           mprotect
0.00    0.000000           0       478           read
0.00    0.000000           0        13           write
0.00    0.000000           0        29           mmap
0.00    0.000000           0         9           munmap
0.00    0.000000           0        18           writev
0.00    0.000000           0       351           madvise
0.00    0.000000           0         1           restart_syscall

100.00    0.016044                  7700      2041 total

3.10 打印指令指针

-i 可以显示每一次系统调用的时候的指令指针
 sudo strace -i df -h
[00007f0d7534c777] execve("/bin/df", ["df", "-h"], [/* 17 vars */]) = 0
[00007faf9cafa4b9] brk(NULL)            = 0x12f0000
[00007faf9cafb387] access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
[00007faf9cafb47a] mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7faf9cd03000
[00007faf9cafb387] access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
[00007faf9cafb327] open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
[00007faf9cafb2b4] fstat(3, {st_mode=S_IFREG|0644, st_size=147662, ...}) = 0
[00007faf9cafb47a] mmap(NULL, 147662, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7faf9ccde000
[00007faf9cafb427] close(3)             = 0
[00007faf9cafb387] access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
[00007faf9cafb327] open("/lib/x86_64-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
[00007faf9cafb347] read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P\t\2\0\0\0\0\0"..., 832) = 832
[00007faf9cafb2b4] fstat(3, {st_mode=S_IFREG|0755, st_size=1868984, ...}) = 0
[00007faf9cafb47a] mmap(NULL, 3971488, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7faf9c716000
[00007faf9cafb517] mprotect(0x7faf9c8d6000, 2097152, PROT_NONE) = 0

3.11 显示调用时间

-t 参数可以显示调用时间。
strace -t df -h
15:19:25 execve("/bin/df", ["df", "-h"], [/* 17 vars */]) = 0
15:19:25 brk(NULL)                      = 0x234c000
15:19:25 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
15:19:25 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f8c7f1d9000
15:19:25 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
15:19:25 open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
15:19:25 fstat(3, {st_mode=S_IFREG|0644, st_size=147662, ...}) = 0
15:19:25 mmap(NULL, 147662, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f8c7f1b4000
15:19:25 close(3)                       = 0
15:19:25 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
15:19:25 open("/lib/x86_64-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
15:19:25 read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P\t\2\0\0\0\0\0"..., 832) = 832
15:19:25 fstat(3, {st_mode=S_IFREG|0755, st_size=1868984, ...}) = 0
15:19:25 mmap(NULL, 3971488, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f8c7ebec000
15:19:25 mprotect(0x7f8c7edac000, 2097152, PROT_NONE) = 0

3.12 显示系统调用的耗时

-T 参数可以显示系统调用的耗时时间
strace -T df -h
execve("/bin/df", ["df", "-h"], [/* 17 vars */]) = 0 <0.000287>
brk(NULL)                               = 0xeca000 <0.000035>
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory) <0.000028>
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9aff2b1000 <0.000020>
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory) <0.000019>
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3 <0.000022>
fstat(3, {st_mode=S_IFREG|0644, st_size=147662, ...}) = 0 <0.000015>
mmap(NULL, 147662, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f9aff28c000 <0.000019>
close(3)                                = 0 <0.000014>

3.13 将追踪结果写入到文件

-o 参数将标准输出写入到文件
 strace -o df_debug.txt df -h
Filesystem      Size  Used Avail Use% Mounted on
udev            3.9G     0  3.9G   0% /dev
tmpfs           788M  9.6M  779M   2% /run
/dev/sda10      324G  252G   56G  82% /
tmpfs           3.9G  104M  3.8G   3% /dev/shm
tmpfs           5.0M  4.0K  5.0M   1% /run/lock
tmpfs           3.9G     0  3.9G   0% /sys/fs/cgroup
cgmfs           100K     0  100K   0% /run/cgmanager/fs
tmpfs           788M   28K  788M   1% /run/user/1000

3.14 显示strace的debug信息

-d 可以显示strace的debug信息。
strace -d df -hptrace_setoptions = 0x11new tcb for pid 5637, active tcbs:1[wait(0x80137f) = 5637] ?? (128),PTRACE_EVENT?? (128)pid 5637 has TCB_STARTUP, initializing itsetting opts 11 on pid 5637[wait(0x80057f) = 5637] ?? (128),PTRACE_EVENT?? (128)[wait(0x127f) = 5637] WIFSTOPPED,sig=SIGCONT[wait(0x857f) = 5637] WIFSTOPPED,sig=133execve("/usr/bin/df", ["df", "-h"], [/* 22 vars */] [wait(0x4057f) = 5637] WIFSTOPPED,sig=SIGTRAP,PTRACE_EVENT_EXEC[wait(0x857f) = 5637] WIFSTOPPED,sig=133) = 0[wait(0x857f) = 5637] WIFSTOPPED,sig=133