linux修改静态ip及Job for network.service failed because the control process exite解决方案

最新推荐文章于 2024-04-23 16:55:19 发布
最新推荐文章于 2024-04-23 16:55:19 发布
阅读量577 收藏 3
点赞数 3
分类专栏： Linux 文章标签： linux tcp/ip php
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/qq_60656889/article/details/137525149
版权

1. 设置网络

输入指令 vim /etc/sysconfig/network-scripts/ifcfg-ens33如果没有找到那就进入到/etc/sysconfig/network-scripts目录下去找ifcfg-开头的文件，后面的名字一般是查看IP地址时前面打头的名称。将BOOTPROTO=dhcp替换为BOOTPROTO=static

  1. ip一般就设置刚刚查出来的ip即可
  2. 子网一般默认
  3. 网关使用netstat -rn
  4. DNScat /etc/resolv.conf
BOOTPROTO=static # 设置为静态IP
IPADDR=192.168.181.128 # 静态IP
NETMASK=255.255.255.0 # 子网掩码
GATEWAY=192.168.181.100 # 网关
DNS=8.8.8.8 # DNS服务器

2.重启网络

使用指令systemctl restart network重启网络，查看ip地址是否变为静态。出现即为成功
在这里插入图片描述
在虚拟机顶部的工具栏，编辑->虚拟网络编辑器，进入下如界面，红圈处需要保证修改后的静态ip、网关、DNS服务器的网段需要与此处保持一致。
在这里插入图片描述

3.修改文件可能出现的问题

1.Job for network.service failed because the control process exite

  • 检查文件修改内容是否有问题
  • 按顺序执行指令：service NetworkManager stop、chkconfig NetworkManager off 、service network restart

推荐文章：Linux查看DNS配置、IP地址、路由（默认网关）
Linux下如何查看网关Gateway地址
解决 Linux 网络 “Job for network.service failed because the control process exite”问题

阿娜依
关注
  • 3
    点赞
  • 踩
  • 3
    收藏
    觉得还不错? 一键收藏
  • 1
    评论
专栏目录
Job for network.service failed because the control process exited with error code. See “systemctl st
weixin_38996555的博客
06-02 9800
Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details.一、由于Xshell掉了，重新连接失败。先ping一下，看网络是否通的二、重启network服务，发现报错三、根据提示查看报错信息四、解决方法1.查验配置文件是否错误2.可能与NetworkManage
Linux虚拟机网络“Job for network.service failed because the control process exited with error code”
天青Azure的博客
10-07 662
问题描述： ping出现Network is unreachable 解决过程： 重启网卡：service network restart ,报错 Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details. 状态为failed sudo systemctl
Centos7网卡启动报错，Job for network.service failed because the control process exited with error code
最新发布
棋耀的菜园
04-23 1283
Centos7网卡启动报错，Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details.
CentOS7 网卡重启失败！Job for network.service failed because the control process exited with error code...
小驴程序源
10-21 9346
问题描述： CentOS 7 重新设置了IP（static），重新启动网卡时出错。 执行命令：systemctl restart network 或者/etc/rc.d/init.d/network restart 提示：Job for network.service failed because the control process exited with error...
Job for network.service failed because the control process exited with error code.
weixin_53572775的博客
08-12 4万+
在我们重启网卡时,发生如下报错: [root@real_server2 network-scripts]# systemctl restart network Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details 首先我们要学会查看报错内容,这句话的
Centos7.4重启网络失败（虚拟机无法连接互联网）Job for network.service failed
qq_43719791的博客
09-09 5488
本篇博客主要是记录在使用VMware安装Centos7.4时，虚拟机无法连接互联网问题（重启网络指令执行失败 / 重启成功但无法ping通外网）。启动网络服务时提示 Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details.
Job for network.service failed
bozuris的博客
04-10 1306
Job for network.service failed
Docker 启动报：Job for docker.service failed because the control process exited with error code. See “解决
cainiao_dashen的博客
10-30 1万+
1、在/etc/docker/daemon.json 路径下添加代码。2、在/etc/sysconfig/docker-storage里面添加下面代码 没有的手动创建 touch /etc/sysconfig/docker-storage。systemctl status docker.service 查看是否运行成功，绿色running 代表成功了。网上看到的，前两种方法不行可以试下：在/etc/docker文件目录下，找到。重新按照官方文档一步一步细心的安装，可能是安装的方法不对或者漏了步骤。
解决 Linux 网络 “Job for network.service failed because the control process exite”
12-28
根据提供的引用内容，解决Linux网络 "Job for network.service failed because the control process exited" 的方法如下： 1. 查看详细错误信息： ```shell systemctl status network.service journalctl -xe ``` ...
Job for mysqld.service failed because the control process exited with error code. See “systemctl sta
YangMay5的博客
01-22 6379
问题：启动mysql服务或者重启，报下面错误 systemctl restart mysqld Job for mysqld.service failed because the control process exited with error code. See "systemctl status mysqld.service" and "journalctl -xe" for details. 分析原因 自己之前强制关机，导致要找的file-pid文件不存在了 如何解决 查看原来这个文件的路径，创建
Job for network.service failed because the control process exite
11-07
"Job for network.service failed because the control process exited" 是一个错误信息，它表示网络服务的控制进程已经退出，导致网络服务无法正常工作。这个错误通常会在重启网络服务时出现，可能是由于配置文件...
启动nginx服务报错Job for nginx.service failed because the control process exited with error code.
热门推荐
常敲代码手不生
04-25 5万+
nginx使用service nginx restart报错 启动nginx服务时如果遇到这个错误 Job for nginx.service failed because the control process exited with error code. See "systemctl status nginx.service" and "journalctl -xe" for details. 可能原因: 1、配置文件语法有误，执行nginx -t 查看输出提示信息 并检查端口是否被占用net
CentOS网络服务起不来 Job for network.service failed
笑忘书的博客
07-14 3万+
今天虚拟机 连接不上，ping ip不通 图片转自 https://www.cnblogs.com/ming369/p/10779835.html [root@centOS ~]# systemctl start network.service Restarting network (via systemctl): Job for network.service failed because...
关于Job for network.service failed because the control process exited with error code.
weixin_69007450的博客
11-13 2万+
关于Job for network.service failed because the control process exited with error code.
Job for network.service failed.
s19862388581的博客
05-03 85
按顺序输入以下命令就ok了。 systemctl status network.service systemctl stop NetworkManager systemctl disable NetworkManager systemctl start network.service ifconfig
评论 1
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值