【显示屏】1.3寸OLED的配置

已于 2022-11-23 18:00:15 修改
阅读量269 收藏 2
点赞数
文章标签： stm32 单片机 嵌入式硬件
于 2022-11-23 17:59:45 首次发布
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/qq_61533374/article/details/127776341
版权

1.3寸OLED的配置

 

asc.h

/*
 * asc.h
 *
 *  Created on: Nov 23, 2022
 *      Author: 86158
 */

#ifndef OLED_ASC_H_
#define OLED_ASC_H_

#ifndef ASC__H
#define ASC__H
const unsigned char asc2_1206[95][12]={
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*" ",0*/
{0x00,0x00,0x00,0x00,0x3F,0x40,0x00,0x00,0x00,0x00,0x00,0x00},/*"!",1*/
{0x00,0x00,0x30,0x00,0x40,0x00,0x30,0x00,0x40,0x00,0x00,0x00},/*""",2*/
{0x09,0x00,0x0B,0xC0,0x3D,0x00,0x0B,0xC0,0x3D,0x00,0x09,0x00},/*"#",3*/
{0x18,0xC0,0x24,0x40,0x7F,0xE0,0x22,0x40,0x31,0x80,0x00,0x00},/*"$",4*/
{0x18,0x00,0x24,0xC0,0x1B,0x00,0x0D,0x80,0x32,0x40,0x01,0x80},/*"%",5*/
{0x03,0x80,0x1C,0x40,0x27,0x40,0x1C,0x80,0x07,0x40,0x00,0x40},/*"&",6*/
{0x10,0x00,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"'",7*/
{0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x80,0x20,0x40,0x40,0x20},/*"(",8*/
{0x00,0x00,0x40,0x20,0x20,0x40,0x1F,0x80,0x00,0x00,0x00,0x00},/*")",9*/
{0x09,0x00,0x06,0x00,0x1F,0x80,0x06,0x00,0x09,0x00,0x00,0x00},/*"*",10*/
{0x04,0x00,0x04,0x00,0x3F,0x80,0x04,0x00,0x04,0x00,0x00,0x00},/*"+",11*/
{0x00,0x10,0x00,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*",",12*/
{0x04,0x00,0x04,0x00,0x04,0x00,0x04,0x00,0x04,0x00,0x00,0x00},/*"-",13*/
{0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*".",14*/
{0x00,0x20,0x01,0xC0,0x06,0x00,0x38,0x00,0x40,0x00,0x00,0x00},/*"/",15*/
{0x1F,0x80,0x20,0x40,0x20,0x40,0x20,0x40,0x1F,0x80,0x00,0x00},/*"0",16*/
{0x00,0x00,0x10,0x40,0x3F,0xC0,0x00,0x40,0x00,0x00,0x00,0x00},/*"1",17*/
{0x18,0xC0,0x21,0x40,0x22,0x40,0x24,0x40,0x18,0x40,0x00,0x00},/*"2",18*/
{0x10,0x80,0x20,0x40,0x24,0x40,0x24,0x40,0x1B,0x80,0x00,0x00},/*"3",19*/
{0x02,0x00,0x0D,0x00,0x11,0x00,0x3F,0xC0,0x01,0x40,0x00,0x00},/*"4",20*/
{0x3C,0x80,0x24,0x40,0x24,0x40,0x24,0x40,0x23,0x80,0x00,0x00},/*"5",21*/
{0x1F,0x80,0x24,0x40,0x24,0x40,0x34,0x40,0x03,0x80,0x00,0x00},/*"6",22*/
{0x30,0x00,0x20,0x00,0x27,0xC0,0x38,0x00,0x20,0x00,0x00,0x00},/*"7",23*/
{0x1B,0x80,0x24,0x40,0x24,0x40,0x24,0x40,0x1B,0x80,0x00,0x00},/*"8",24*/
{0x1C,0x00,0x22,0xC0,0x22,0x40,0x22,0x40,0x1F,0x80,0x00,0x00},/*"9",25*/
{0x00,0x00,0x00,0x00,0x08,0x40,0x00,0x00,0x00,0x00,0x00,0x00},/*":",26*/
{0x00,0x00,0x00,0x00,0x04,0x60,0x00,0x00,0x00,0x00,0x00,0x00},/*";",27*/
{0x00,0x00,0x04,0x00,0x0A,0x00,0x11,0x00,0x20,0x80,0x40,0x40},/*"<",28*/
{0x09,0x00,0x09,0x00,0x09,0x00,0x09,0x00,0x09,0x00,0x00,0x00},/*"=",29*/
{0x00,0x00,0x40,0x40,0x20,0x80,0x11,0x00,0x0A,0x00,0x04,0x00},/*">",30*/
{0x18,0x00,0x20,0x00,0x23,0x40,0x24,0x00,0x18,0x00,0x00,0x00},/*"?",31*/
{0x1F,0x80,0x20,0x40,0x27,0x40,0x29,0x40,0x1F,0x40,0x00,0x00},/*"@",32*/
{0x00,0x40,0x07,0xC0,0x39,0x00,0x0F,0x00,0x01,0xC0,0x00,0x40},/*"A",33*/
{0x20,0x40,0x3F,0xC0,0x24,0x40,0x24,0x40,0x1B,0x80,0x00,0x00},/*"B",34*/
{0x1F,0x80,0x20,0x40,0x20,0x40,0x20,0x40,0x30,0x80,0x00,0x00},/*"C",35*/
{0x20,0x40,0x3F,0xC0,0x20,0x40,0x20,0x40,0x1F,0x80,0x00,0x00},/*"D",36*/
{0x20,0x40,0x3F,0xC0,0x24,0x40,0x2E,0x40,0x30,0xC0,0x00,0x00},/*"E",37*/
{0x20,0x40,0x3F,0xC0,0x24,0x40,0x2E,0x00,0x30,0x00,0x00,0x00},/*"F",38*/
{0x0F,0x00,0x10,0x80,0x20,0x40,0x22,0x40,0x33,0x80,0x02,0x00},/*"G",39*/
{0x20,0x40,0x3F,0xC0,0x04,0x00,0x04,0x00,0x3F,0xC0,0x20,0x40},/*"H",40*/
{0x20,0x40,0x20,0x40,0x3F,0xC0,0x20,0x40,0x20,0x40,0x00,0x00},/*"I",41*/
{0x00,0x60,0x20,0x20,0x20,0x20,0x3F,0xC0,0x20,0x00,0x20,0x00},/*"J",42*/
{0x20,0x40,0x3F,0xC0,0x24,0x40,0x0B,0x00,0x30,0xC0,0x20,0x40},/*"K",43*/
{0x20,0x40,0x3F,0xC0,0x20,0x40,0x00,0x40,0x00,0x40,0x00,0xC0},/*"L",44*/
{0x3F,0xC0,0x3C,0x00,0x03,0xC0,0x3C,0x00,0x3F,0xC0,0x00,0x00},/*"M",45*/
{0x20,0x40,0x3F,0xC0,0x0C,0x40,0x23,0x00,0x3F,0xC0,0x20,0x00},/*"N",46*/
{0x1F,0x80,0x20,0x40,0x20,0x40,0x20,0x40,0x1F,0x80,0x00,0x00},/*"O",47*/
{0x20,0x40,0x3F,0xC0,0x24,0x40,0x24,0x00,0x18,0x00,0x00,0x00},/*"P",48*/
{0x1F,0x80,0x21,0x40,0x21,0x40,0x20,0xE0,0x1F,0xA0,0x00,0x00},/*"Q",49*/
{0x20,0x40,0x3F,0xC0,0x24,0x40,0x26,0x00,0x19,0xC0,0x00,0x40},/*"R",50*/
{0x18,0xC0,0x24,0x40,0x24,0x40,0x22,0x40,0x31,0x80,0x00,0x00},/*"S",51*/
{0x30,0x00,0x20,0x40,0x3F,0xC0,0x20,0x40,0x30,0x00,0x00,0x00},/*"T",52*/
{0x20,0x00,0x3F,0x80,0x00,0x40,0x00,0x40,0x3F,0x80,0x20,0x00},/*"U",53*/
{0x20,0x00,0x3E,0x00,0x01,0xC0,0x07,0x00,0x38,0x00,0x20,0x00},/*"V",54*/
{0x38,0x00,0x07,0xC0,0x3C,0x00,0x07,0xC0,0x38,0x00,0x00,0x00},/*"W",55*/
{0x20,0x40,0x39,0xC0,0x06,0x00,0x39,0xC0,0x20,0x40,0x00,0x00},/*"X",56*/
{0x20,0x00,0x38,0x40,0x07,0xC0,0x38,0x40,0x20,0x00,0x00,0x00},/*"Y",57*/
{0x30,0x40,0x21,0xC0,0x26,0x40,0x38,0x40,0x20,0xC0,0x00,0x00},/*"Z",58*/
{0x00,0x00,0x00,0x00,0x7F,0xE0,0x40,0x20,0x40,0x20,0x00,0x00},/*"[",59*/
{0x00,0x00,0x70,0x00,0x0C,0x00,0x03,0x80,0x00,0x40,0x00,0x00},/*"\",60*/
{0x00,0x00,0x40,0x20,0x40,0x20,0x7F,0xE0,0x00,0x00,0x00,0x00},/*"]",61*/
{0x00,0x00,0x20,0x00,0x40,0x00,0x20,0x00,0x00,0x00,0x00,0x00},/*"^",62*/
{0x00,0x10,0x00,0x10,0x00,0x10,0x00,0x10,0x00,0x10,0x00,0x10},/*"_",63*/
{0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"`",64*/
{0x00,0x00,0x02,0x80,0x05,0x40,0x05,0x40,0x03,0xC0,0x00,0x40},/*"a",65*/
{0x20,0x00,0x3F,0xC0,0x04,0x40,0x04,0x40,0x03,0x80,0x00,0x00},/*"b",66*/
{0x00,0x00,0x03,0x80,0x04,0x40,0x04,0x40,0x06,0x40,0x00,0x00},/*"c",67*/
{0x00,0x00,0x03,0x80,0x04,0x40,0x24,0x40,0x3F,0xC0,0x00,0x40},/*"d",68*/
{0x00,0x00,0x03,0x80,0x05,0x40,0x05,0x40,0x03,0x40,0x00,0x00},/*"e",69*/
{0x00,0x00,0x04,0x40,0x1F,0xC0,0x24,0x40,0x24,0x40,0x20,0x00},/*"f",70*/
{0x00,0x00,0x02,0xE0,0x05,0x50,0x05,0x50,0x06,0x50,0x04,0x20},/*"g",71*/
{0x20,0x40,0x3F,0xC0,0x04,0x40,0x04,0x00,0x03,0xC0,0x00,0x40},/*"h",72*/
{0x00,0x00,0x04,0x40,0x27,0xC0,0x00,0x40,0x00,0x00,0x00,0x00},/*"i",73*/
{0x00,0x10,0x00,0x10,0x04,0x10,0x27,0xE0,0x00,0x00,0x00,0x00},/*"j",74*/
{0x20,0x40,0x3F,0xC0,0x01,0x40,0x07,0x00,0x04,0xC0,0x04,0x40},/*"k",75*/
{0x20,0x40,0x20,0x40,0x3F,0xC0,0x00,0x40,0x00,0x40,0x00,0x00},/*"l",76*/
{0x07,0xC0,0x04,0x00,0x07,0xC0,0x04,0x00,0x03,0xC0,0x00,0x00},/*"m",77*/
{0x04,0x40,0x07,0xC0,0x04,0x40,0x04,0x00,0x03,0xC0,0x00,0x40},/*"n",78*/
{0x00,0x00,0x03,0x80,0x04,0x40,0x04,0x40,0x03,0x80,0x00,0x00},/*"o",79*/
{0x04,0x10,0x07,0xF0,0x04,0x50,0x04,0x40,0x03,0x80,0x00,0x00},/*"p",80*/
{0x00,0x00,0x03,0x80,0x04,0x40,0x04,0x50,0x07,0xF0,0x00,0x10},/*"q",81*/
{0x04,0x40,0x07,0xC0,0x02,0x40,0x04,0x00,0x04,0x00,0x00,0x00},/*"r",82*/
{0x00,0x00,0x06,0x40,0x05,0x40,0x05,0x40,0x04,0xC0,0x00,0x00},/*"s",83*/
{0x00,0x00,0x04,0x00,0x1F,0x80,0x04,0x40,0x00,0x40,0x00,0x00},/*"t",84*/
{0x04,0x00,0x07,0x80,0x00,0x40,0x04,0x40,0x07,0xC0,0x00,0x40},/*"u",85*/
{0x04,0x00,0x07,0x00,0x04,0xC0,0x01,0x80,0x06,0x00,0x04,0x00},/*"v",86*/
{0x06,0x00,0x01,0xC0,0x07,0x00,0x01,0xC0,0x06,0x00,0x00,0x00},/*"w",87*/
{0x04,0x40,0x06,0xC0,0x01,0x00,0x06,0xC0,0x04,0x40,0x00,0x00},/*"x",88*/
{0x04,0x10,0x07,0x10,0x04,0xE0,0x01,0x80,0x06,0x00,0x04,0x00},/*"y",89*/
{0x00,0x00,0x04,0x40,0x05,0xC0,0x06,0x40,0x04,0x40,0x00,0x00},/*"z",90*/
{0x00,0x00,0x00,0x00,0x04,0x00,0x7B,0xE0,0x40,0x20,0x00,0x00},/*"{",91*/
{0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xF0,0x00,0x00,0x00,0x00},/*"|",92*/
{0x00,0x00,0x40,0x20,0x7B,0xE0,0x04,0x00,0x00,0x00,0x00,0x00},/*"}",93*/
{0x40,0x00,0x80,0x00,0x40,0x00,0x20,0x00,0x20,0x00,0x40,0x00},/*"~",94*/
};
#endif


#endif /* OLED_ASC_H_ */

OLED.h

/*
 * OLED.h
 *
 *  Created on: Nov 23, 2022
 *      Author: 86158
 */

#ifndef OLED_OLED_H_
#define OLED_OLED_H_

#ifndef OLED_H
#define OLED_H

#include <stdint.h>


// the I2C address of oled
#define OLED_I2C_ADDRESS    0x78

//the resolution of oled   128*64
#define MAX_COLUMN      128
#define MAX_ROW         64

#define X_WIDTH         MAX_COLUMN
#define Y_WIDTH         MAX_ROW

#define OLED_CMD        0x00
#define OLED_DATA       0x01

typedef enum
{
    PEN_CLEAR = 0x00,
    PEN_WRITE = 0x01,
    PEN_INVERSION= 0x02,
}pen_typedef;
extern void OLED_init(void);
extern void OLED_display_on(void);
extern void OLED_display_off(void);
extern void OLED_operate_gram(pen_typedef pen);
extern void OLED_set_pos(uint8_t x, uint8_t y);
extern void OLED_draw_point(int8_t x, int8_t y, pen_typedef pen);
extern void OLED_show_string(uint8_t row, uint8_t col, uint8_t *chr);
extern void OLED_printf(uint8_t row, uint8_t col, const char *fmt,...);
extern void OLED_refresh_gram(void);
extern void OLED_LOGO(void);
#endif


#endif /* OLED_OLED_H_ */

OLED.c

/*
 * OLED.c
 *
 *  Created on: Nov 23, 2022
 *      Author: 86158
 */

#include "OLED.h"
#include "asc.h"
#include "main.h"
#include <stdio.h>
#include <stdarg.h>

extern I2C_HandleTypeDef hi2c1;

static uint8_t OLED_GRAM[128][8];

void oled_write_byte(uint8_t dat, uint8_t cmd)
{
    static uint8_t cmd_data[2];
    if(cmd == OLED_CMD)
    {
        cmd_data[0] = 0x00;
    }
    else
    {
        cmd_data[0] = 0x40;
    }
    cmd_data[1] = dat;
    HAL_I2C_Master_Transmit(&hi2c1, OLED_I2C_ADDRESS, cmd_data, 2, 10);
}
 void OLED_init(void)
{
    oled_write_byte(0xAE, OLED_CMD);    //display off
    oled_write_byte(0x20, OLED_CMD);    //Set Memory Addressing Mode
    oled_write_byte(0x10, OLED_CMD);    //00,Horizontal Addressing Mode;01,Vertical Addressing Mode;10,Page Addressing Mode (RESET);11,Invalid
    oled_write_byte(0xb0, OLED_CMD);    //Set Page Start Address for Page Addressing Mode,0-7
    oled_write_byte(0xc8, OLED_CMD);    //Set COM Output Scan Direction
    oled_write_byte(0x00, OLED_CMD);    //---set low column address
    oled_write_byte(0x10, OLED_CMD);    //---set high column address
    oled_write_byte(0x40, OLED_CMD);    //--set start line address
    oled_write_byte(0x81, OLED_CMD);    //--set contrast control register
    oled_write_byte(0xff, OLED_CMD);    //brightness 0x00~0xff
    oled_write_byte(0xa1, OLED_CMD);    //--set segment re-map 0 to 127
    oled_write_byte(0xa6, OLED_CMD);    //--set normal display
    oled_write_byte(0xa8, OLED_CMD);    //--set multiplex ratio(1 to 64)
    oled_write_byte(0x3F, OLED_CMD);    //
    oled_write_byte(0xa4, OLED_CMD);    //0xa4,Output follows RAM content;0xa5,Output ignores RAM content
    oled_write_byte(0xd3, OLED_CMD);    //-set display offset
    oled_write_byte(0x00, OLED_CMD);    //-not offset
    oled_write_byte(0xd5, OLED_CMD);    //--set display clock divide ratio/oscillator frequency
    oled_write_byte(0xf0, OLED_CMD);    //--set divide ratio
    oled_write_byte(0xd9, OLED_CMD);    //--set pre-charge period
    oled_write_byte(0x22, OLED_CMD);    //
    oled_write_byte(0xda, OLED_CMD);    //--set com pins hardware configuration
    oled_write_byte(0x12, OLED_CMD);
    oled_write_byte(0xdb, OLED_CMD);    //--set vcomh
    oled_write_byte(0x20, OLED_CMD);    //0x20,0.77xVcc
    oled_write_byte(0x8d, OLED_CMD);    //--set DC-DC enable
    oled_write_byte(0x14, OLED_CMD);    //
    oled_write_byte(0xaf, OLED_CMD);    //--turn on oled panel
}
void OLED_display_on(void)
{
    oled_write_byte(0x8d, OLED_CMD);
    oled_write_byte(0x14, OLED_CMD);
    oled_write_byte(0xaf, OLED_CMD);
}
void OLED_display_off(void)
{
    oled_write_byte(0x8d, OLED_CMD);
    oled_write_byte(0x10, OLED_CMD);
    oled_write_byte(0xae, OLED_CMD);
}
 void OLED_operate_gram(pen_typedef pen)
{
    uint8_t i, n;

    for (i = 0; i < 8; i++)
    {
        for (n = 0; n < 128; n++)
        {
            if (pen == PEN_WRITE)
            {
                OLED_GRAM[n][i] = 0xff;
            }
            else if (pen == PEN_CLEAR)
            {
                OLED_GRAM[n][i] = 0x00;
            }
            else
            {
                OLED_GRAM[n][i] = 0xff - OLED_GRAM[n][i];
            }
        }
    }
}
void OLED_set_pos(uint8_t x, uint8_t y)
{
    oled_write_byte((0xb0 + y), OLED_CMD);              //set page address y
    oled_write_byte(((x&0xf0)>>4)|0x10, OLED_CMD);      //set column high address
    oled_write_byte((x&0x0f), OLED_CMD);                //set column low address
}
void OLED_draw_point(int8_t x, int8_t y, pen_typedef pen)
{
    uint8_t page = 0, row = 0;

    /* check the corrdinate */
    if ((x < 0) || (x > (X_WIDTH - 1)) || (y < 0) || (y > (Y_WIDTH - 1)))
    {
        return;
    }
    page = y / 8;
    row = y % 8;

    if (pen == PEN_WRITE)
    {
        OLED_GRAM[x][page] |= 1 << row;
    }
    else if (pen == PEN_INVERSION)
    {
        OLED_GRAM[x][page] ^= 1 << row;
    }
    else
    {
        OLED_GRAM[x][page] &= ~(1 << row);
    }
}
void OLED_draw_line(uint8_t x1, uint8_t y1, uint8_t x2, uint8_t y2, pen_typedef pen)
{
    uint8_t col = 0, row = 0;
    uint8_t x_st = 0, x_ed = 0, y_st = 0, y_ed = 0;
    float k = 0.0f, b = 0.0f;

    if (y1 == y2)
    {
        (x1 <= x2) ? (x_st = x1):(x_st = x2);
        (x1 <= x2) ? (x_ed = x2):(x_ed = x1);

        for (col = x_st; col <= x_ed; col++)
        {
            OLED_draw_point(col, y1, pen);
        }
    }
    else if (x1 == x2)
    {
        (y1 <= y2) ? (y_st = y1):(y_st = y2);
        (y1 <= y2) ? (y_ed = y2):(y_ed = y1);

        for (row = y_st; row <= y_ed; row++)
        {
            OLED_draw_point(x1, row, pen);
        }
    }
    else
    {
        k = ((float)(y2 - y1)) / (x2 - x1);
        b = (float)y1 - k * x1;

        (x1 <= x2) ? (x_st = x1):(x_st = x2);
        (x1 <= x2) ? (x_ed = x2):(x_ed = x2);

        for (col = x_st; col <= x_ed; col++)
        {
            OLED_draw_point(col, (uint8_t)(col * k + b), pen);
        }
    }
}
void OLED_show_char(uint8_t row, uint8_t col, uint8_t chr)
{
    uint8_t x = col * 6;
    uint8_t y = row * 12;
    uint8_t temp, t, t1;
    uint8_t y0 = y;
    chr = chr - ' ';

    for (t = 0; t < 12; t++)
    {
        temp = asc2_1206[chr][t];

        for (t1 = 0; t1 < 8; t1++)
        {
            if (temp&0x80)
                OLED_draw_point(x, y, PEN_WRITE);
            else
                OLED_draw_point(x, y, PEN_CLEAR);

            temp <<= 1;
            y++;
            if ((y - y0) == 12)
            {
                y = y0;
                x++;
                break;
            }
        }
    }
}

void OLED_show_string(uint8_t row, uint8_t col, uint8_t *chr)
{
    uint8_t n =0;

    while (chr[n] != '\0')
    {
        OLED_show_char(row, col, chr[n]);
        col++;

        if (col > 20)
        {
            col = 0;
            row += 1;
        }
        n++;
    }
}
 void OLED_printf(uint8_t row, uint8_t col, const char *fmt,...)
{
    static uint8_t LCD_BUF[128] = {0};
    static va_list ap;
    uint8_t remain_size = 0;

    if ((row > 4) || (col > 20) )
    {
        return;
    }
    va_start(ap, fmt);

    vsprintf((char *)LCD_BUF, fmt, ap);

    va_end(ap);

    remain_size = 21 - col;

    LCD_BUF[remain_size] = '\0';

    OLED_show_string(row, col, LCD_BUF);
}
void OLED_refresh_gram(void)
{
    uint8_t i, n;

    for (i = 0; i < 8; i++)
    {
        OLED_set_pos(0, i);
        for (n = 0; n < 128; n++)
        {
            oled_write_byte(OLED_GRAM[n][i], OLED_DATA);
        }
    }
}


#include "OLED.h"
OLED_init();
OLED_display_on;
OLED_operate_gram(0);
OLED_show_string(2,2,"*-*");
OLED_refresh_gram();





原博客

aumn
关注
  • 0
    点赞
  • 踩
  • 2
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
【慢学鸿蒙OS2.0】 第二层 hispark led屏
a854489422的专栏
01-10 222
hi_i2c_init(HI_I2C_IDX_0, 100000); /* baudrate: 100000 */ OLED_WR_Byte(0xA6,OLED_CMD);//正常显示 OLED_WR_Byte(0xA7,OLED_CMD);//反色显示 void OLED_WR_Byte(unsigned dat, unsigned cmd) { if (cmd) { Write_IIC_Data(dat); } else { Write_IIC_Command(...
1.3寸oled，ssd1306芯片驱动支持arduino
09-11
1.3寸oled，ssd1306芯片驱动支持arduino，测试里程在examples\arduino里面
1.3寸OLED显示屏模块资料V2.0.zip_1.3‘OLED V2.0_1.3寸OLED_1.3寸OLED条形_OLED 屏
07-15
OLED显示屏程序，适用于多个MCU，IIC和SPI驱动方式均可
STM32系列(HAL库)——F103C8T6硬件SPI点亮带字库OLED屏
嵌入式创客工坊的博客
06-21 5555
(1)编程平台：Keil5(2)CubeMX(3)程序：点击下载(1)1.3寸带字库OLED (2)F1的板子，本例使用经典F103C8T6(3)ST-link 下载器(4)杜邦线若干配置RCC配置SYS配置时钟树 添加工程文件 添加头文件路径会提示如下报错，双击错误跳转到oled.h (4)修改oled.c ①①①修改头文件 ②②②修改写字节函数 ③③③修改初始化函数 (5)修改zk.c ①①①修改写字节函数 ②②②修改读字节函数 (6)main.c ①添加头
基于STM32F103C8T6最小系统板HAL库CubeMX SPI驱动7针 OLED显示屏（0.96寸 1.3寸通用）
遗忘丶的博客
04-15 7158
STM32F103C8T6最小系统板HAL库 SPI 驱动 七针OLED显示屏，初始化代码，调用实力，汉字取模软件使用方法
1.3寸oled屏幕驱动
10-21
MCU用的MSP432P401，屏幕用的中景园科技的1.3寸oled，软件spi通信
1.3寸oled（I2C）右屏幕出现一条竖线
weixin_56044870的博客
02-11 1688
最近在某宝淘了个1.3oled，由于平常用的0.96寸oled用的比较多，忽略了一点就是某宝上可能是给你发的显示屏驱动不一样，大部分0.96oled一般都是ssd1306的驱动，而1.3的oled（I2C）有ssd1306或者SH1106，如果照搬0.96oled用显存刷新的代码，会发现前两列用不了，原因如下：
1.3寸OLED（不带字库）全套资料
07-01
1.3寸OLED全套资料 132 X 64 Dot Matrix OLED/PLED Preliminary Segment/Common Driver with Controller 1 V0.2 Features „ Support maximum 132 X 64 dot matrix panel „ Embedded 132 X 64 bits SRAM „ Operating voltage: - Logic voltage supply: VDD1 = 1.65V - 3.5V - DC-DC voltage supply: VDD2 = 3.0V – 4.2V - OLED Operating voltage supply: External VPP supply = 6.4V - 13.0V Internal VPP generator = 6.4V - 9.0V „ Maximum segment output current: 200μA „ Maximum common sink current: 27mA „ 8-bit 6800-series parallel interface, 8-bit 8080-series parallel interface, 3-wire & 4-wire serial peripheral interface, 400KHz fast I2C bus interface „ Programmable frame frequency and multiplexing ratio „ Row re-mapping and column re-mapping (ADC) „ Vertical scrolling „ On-chip oscillator „ Programmable Internal charge pump circuit output „ 256-step contrast control on monochrome passive OLED panel „ Low power consumption - Sleep mode: <5μA - VDD1=0V，VDD2=3.0V – 4.2V: <5μA - VDD1,2=0V，VPP=3.0V – 4.2V: <5μA „ Wide range of operating temperatures: -40 to +85°C „ Available in COG form, thickness: 300μm General Description SH1106 is a single-chip CMOS OLED/PLED driver with controller for organic/polymer light emitting diode dot-matrix graphic display system. SH1106 consists of 132 segments, 64 commons that can support a maximum display resolution of 132 X 64. It is designed for Common Cathode type OLED panel. SH1106 embeds with contrast control, display RAM oscillator and efficient DC-DC converter, which reduces the number of external components and power consumption. SH1106 is suitable for a wide range of compact portable applications, such as sub-display of mobile phone, calculator and MP3 player, etc.
1.3寸OLED模块的6PIN SPI显示屏电路原理图.pdf
04-04
1.3寸OLED模块的6PIN SPI显示屏电路原理图 接口配置方法： 4线SPI接口焊接：R3 IIC接口焊接：R1，R6，R7，R8 R8可不焊接，官方手册要求焊接
中景园电子1.3寸OLED显示屏_STM32F103C8T6系列_带字库.zip
07-30
中景园电子1.3寸OLED显示屏_STM32F103C8T6系列_带字库.zip
1.3寸OLED屏_驱动芯片SH1106手册
03-27
1.3寸OLED屏_驱动芯片SH1106手册，用于开发穿戴设备
最新鸿蒙操作系统,2.0版
09-21
2020年9月18发布，最新鸿蒙操作系统,2.0版。华为官方发布“鸿蒙操作系统”，华为公司研发，开源微内核，全场景，布鸿蒙操作系统，[2019.8.9] 华为官方发布“鸿蒙操作系统”，并且宣布鸿蒙将开源。
51单片机驱1.3寸OLED屏 SH1106驱动 7脚屏 4脚 SPI通信
02-24
51单片机驱1.3寸OLED屏 SH1106驱动 7脚屏 4脚 SPI通信 驱动程序，主控89C52 多文件易看懂，显示文字，显示图片 把显示封装好了 ，能简单实现操作每个点
01中景园电子1.3英寸OLED显示屏原理图_1.3英寸OLED显示屏原理图_中景园1.3oled_中景园电子_
09-28
01中景园电子1.3英寸OLED显示屏原理图
3分钟移植驱动程序，1.3寸OLED使用教程（也适用于0.96寸）
weixin_50622833的博客
10-17 9930
1.3寸OLED使用教程前言（文末获取源码）一、移植驱动程序二、使用教程1.上电初始化2.显示英文字符3.显示中文字符4.显示图片三、原理解析获取工程源码 前言（文末获取源码） 本文包含了1.3寸OLED移植、使用教程和原理，只需3分钟即可完成驱动程序的移植（无关芯片平台）。1.3寸OLED分辨率为12864，驱动芯片为SSD1306，通信方式为IIC。理论上分辨率同样是12864的0.96寸OLED也适用，但未曾测试。欢迎使用过的朋友留言告知结果。字模提取软件请到网上搜索下载 一、移植驱动程序 驱动程
鸿蒙os2.0系统 荣耀,华为鸿蒙os2.0系统
weixin_30332669的博客
06-01 222
华为鸿蒙os2.0系统这是专门为所有的华为手机用户打造的全新升级平台，通过这个平台可以自由升级你的手机鸿蒙系统，体验全新的2.0畅享，超高清整洁的界面，华丽尊贵的设计，带给你最优质的服务，感兴趣的小伙伴不妨来华为鸿蒙os2.0系统体验吧。华为鸿蒙os2.0系统适配机型HarmonyOS (鸿蒙操作系统)能支持的华为手机:1. Huawei Mate 402. Huawei Mate 40 Pro3...
鸿蒙os2.0主页,鸿蒙OS2.0来了！
weixin_42519253的博客
05-27 417
原标题：鸿蒙OS2.0来了！12月16日，华为在北京正式举办了鸿蒙2.0手机开发者Beta版活动，今天正式发布了鸿蒙2.0操作系统的开发者Beta版本，今天也是官方的首次鸿蒙系统上线日期。 华为王成录表示，鸿蒙OS是面向万物互联的全场景分布式操作系统，希望与合作伙伴和开发者一起打造面向万物互联时代的超级终端体验。当然，我们最关心的就是鸿蒙系统在手机上的使用情况。根据媒体演示机的图可以看到，鸿蒙OS...
鸿蒙os 2.0游戏,鸿蒙os2.0正式版
weixin_35965372的博客
05-30 258
鸿蒙os2.0正式版是一款非常实用的手机系统软件，软件界面设计的非常的人性化，支持多设备无缝协同，占比内存小，运营流畅。操作简单容易上手，功能非常的强大，提高手机的性能，感兴趣的朋友快点下载体验吧。鸿蒙os2.0正式版软件介绍鸿蒙系统os2.0最新版是华为打造的最革新的系统，这款系统能与安卓、苹果、PC等终端可以相连接。可以帮助华为手机进行系统升级，为用户带来更加便捷的操作，同时能够带来更加全面的...
鸿蒙os2.0系统预约平台,鸿蒙系统os2.0app-华为鸿蒙os2.0最新版v1.0预约 - 起点软件园...
weixin_39894255的博客
05-30 240
鸿蒙os2.0，这是华为全新推出的手机系统，为小伙伴提供更畅快的使用体验，在这里小伙伴可以随时享受分布式的操作服务，带给小伙伴更智能的配网功能，还支持大小屏互动，自适应UX等等功能，为小伙伴提供更多的使用便利!鸿蒙os2.0详情鸿蒙OS2.0系统是华为全新上线的手机操作系统，相对于之前的系统来说这一版本的使用感有了很大的提升，大家可以根据自己的需要进行升级。在这里提供的很多功能都是新添加进去的，大...
1.3寸OLED乱码
最新发布
07-27
这些差异可能导致1.3寸屏显示乱码。 为了解决这个问题，你可以尝试以下解决方案： 1. 修改代码中的列起始地址（Column Start Address）为0x02，确保每次更新页面之前都正确设置列起始地址。可以发送0x02和0x10指令...

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值