A - 数据结构实验之链表一:顺序建立链表
Description
输入N个整数,按照输入的顺序建立单链表存储,并遍历所建立的单链表,输出这些数据。
Input
第一行输入整数的个数N;
第二行依次输入每个整数。
Output
输出这组整数。
Sample
Input
8 12 56 4 6 55 15 33 62
Output
12 56 4 6 55 15 33 62
Hint
不得使用数组!
// 尾插法
#include <iostream>
using namespace std;
struct node
{
int data;
struct node *next;
};
int main()
{
int n;
struct node *head, *tail, *p;// 头、尾、游动指针
head = new node;// c++里可以这样写,c中应该要用malloc
head -> next = NULL;// 将头指针初始化
tail = head;// ?
cin >> n;
for(int i = 0; i < n; i++){
p = new node;// ?这行没有的话会出现警告
cin >> p->data;// 输入链表中的每个数
p -> next = NULL;//
tail -> next = p;// 将每个新的数字放到链表尾部
tail = p;// 更新尾指针
}
p = head -> next;
while(p){
if(p -> next == NULL){// 最后一个数
cout << p->data;
}
else{
cout << p->data << " ";
}
p = p -> next;// 更新p,遍历链表
}
return 0;
}
**当链表顺序插入结点后,尾指针的值要随之修改,以指向新的尾结点。
c:
#include<stdio.h>
#include<stdlib.h>
struct node
{
int data;
struct node *next;
};
int main()
{
struct node *head, *tail, *p;// 头指针,尾指针,游动指针
// 为链表开辟空间并设为空
head = (struct node*)malloc(sizeof(struct node));
head->next = NULL;
tail = head;
int n;
scanf("%d", &n);
// 尾插法
for(int i = 0; i < n; i++){
p = (struct node*)malloc(sizeof(struct node));
scanf("%d", &p->data);
p->next = NULL;
tail->next = p;
tail = p;// 更新尾结点
}
p = head->next;
while(p){
if(p->next == NULL) printf("%d\n", p->data);
else printf("%d ", p->data);
p = p->next;
}// 顺序输出链表的方法
return 0;
}
B - 数据结构实验之链表二:逆序建立链表
Description
输入整数个数N,再输入N个整数,按照这些整数输入的相反顺序建立单链表,并依次遍历输出单链表的数据。
Input
第一行输入整数N;;
第二行依次输入N个整数,逆序建立单链表。
Output
依次输出单链表所存放的数据。
Sample
Input
10 11 3 5 27 9 12 43 16 84 22
Output
22 84 16 43 12 9 27 5 3 11
Hint
不能使用数组!
/*头插法*/
#include<iostream>
using namespace std;
struct node
{
int data;
struct node *next;
};
int main()
{
int n;
struct node *head, *p;
head = new node;
head -> next = NULL;
cin >> n;
for(int i = 0; i < n; i++){
p = new node;
cin >> p -> data;
p -> next = head -> next;// 觉得这个操作是关键!!头插法的灵魂
head -> next = p;
}
p = head -> next;
while(p != NULL){
if(p -> next != NULL){
cout << p -> data << " ";
}
else{
cout << p -> data;
}
p = p -> next;
}
return 0;
}
C - 师--链表的结点插入
Description
给出一个只有头指针的链表和 n 次操作,每次操作为在链表的第 m 个元素后面插入一个新元素x。若m 大于链表的元素总数则将x放在链表的最后。
Input
多组输入。每组数据首先输入一个整数n(n∈[1,100]),代表有n次操作。
接下来的n行,每行有两个整数Mi(Mi∈[0,10000]),Xi。
Output
对于每组数据。从前到后输出链表的所有元素,两个元素之间用空格隔开。
Sample
Input
4 1 1 1 2 0 3 100 4
Output
3 1 2 4
Hint
样例中第一次操作1 1,由于此时链表中没有元素,1>0,所以此时将第一个数据插入到链表的最后,也就是头指针的后面。
#include<iostream>
using namespace std;
typedef struct node
{
int data;
struct node *next;
}tree;
int main()
{
int n, m, x;
struct node *head, *tail, *p, *q;
while(cin >> n){
head = new tree;// 分配地址
head -> next = NULL;
tail = head;// 若是空链表则头尾节点一样
while(n > 0){
q = head;
cin >> m >> x;
while(m-- && q -> next){
q = q -> next;
}
p = new tree;
p -> data = x;
p -> next = NULL;
p -> next = q -> next;
q -> next = p;
n--;
}
p = head -> next;
while(p){
if(p -> next == NULL)
cout << p->data << endl;
else
cout << p->data << " ";
p = p -> next;
}
}
return 0;
}
D - 数据结构实验之链表七:单链表中重复元素的删除
Description
按照数据输入的相反顺序(逆位序)建立一个单链表,并将单链表中重复的元素删除(值相同的元素只保留最后输入的一个)。
Input
第一行输入元素个数 n (1 <= n <= 15);
第二行输入 n 个整数,保证在 int 范围内。
Output
第一行输出初始链表元素个数;
第二行输出按照逆位序所建立的初始链表;
第三行输出删除重复元素后的单链表元素个数;
第四行输出删除重复元素后的单链表。
Sample
Input
10 21 30 14 55 32 63 11 30 55 30
Output
10 30 55 30 11 63 32 55 14 30 21 7 30 55 11 63 32 14 21
#include<iostream>
using namespace std;
typedef struct node
{
int data;
struct node *next;
}tree;
int main()
{
int n;
tree *head, *p, *q, *w;
head = new tree;
head->next = NULL;
cin >> n;
for (int i = 0; i < n; i++) {
p = new tree;
cin >> p->data;
p->next = head->next;
head->next = p;
}
cout << n << endl;
p = head->next;
while (p) {
if (p->next == NULL) {
cout << p->data << endl;
}
else {
cout << p->data << " ";
}
p = p->next;
}
p = head->next;
while (p) {
q = p;
w = q->next;
while (w) {
if (w->data == p->data) {
n--;
q->next = w->next;
w = w->next;
}
else {
q = w;
w = w->next;
}
}
p = p->next;
}
cout << n << endl;
p = head->next;
while (p) {
if (p->next == NULL) {
cout << p->data << endl;
}
else {
cout << p->data << " ";
}
p = p->next;
}
return 0;
}
E - 数据结构实验之链表三:链表的逆置
Description
输入多个整数,以-1作为结束标志,顺序建立一个带头结点的单链表,之后对该单链表的数据进行逆置,并输出逆置后的单链表数据。
Input
输入多个整数,以-1作为结束标志。
Output
输出逆置后的单链表数据。
Sample
Input
12 56 4 6 55 15 33 62 -1
Output
62 33 15 55 6 4 56 12
Hint
不得使用数组。
#include<iostream>
using namespace std;
typedef struct node
{
int data;
struct node *next;
}tree;
int main()
{
tree *head, *p;
head = new tree;
head->next = NULL;
int m;
while (cin >> m && m != -1) {
p = new tree;
p->data = m;
p->next = head->next;
head->next = p;
}
p = head->next;
while (p) {
if (p->next == NULL) {
cout << p->data;
}
else {
cout << p->data << " ";
}
p = p->next;
}
return 0;
}
F - 数据结构实验之链表四:有序链表的归并
Description
分别输入两个有序的整数序列(分别包含M和N个数据),建立两个有序的单链表,将这两个有序单链表合并成为一个大的有序单链表,并依次输出合并后的单链表数据。
Input
第一行输入M与N的值;
第二行依次输入M个有序的整数;
第三行依次输入N个有序的整数。
Output
输出合并后的单链表所包含的M+N个有序的整数。
Sample
Input
6 5 1 23 26 45 66 99 14 21 28 50 100
Output
1 14 21 23 26 28 45 50 66 99 100
Hint
不得使用数组!
#include<bits/stdc++.h>
using namespace std;
typedef struct node
{
int data;
struct node *next;
}tree;
// 两个链表
struct node *h1, *p1, *t1;
struct node *h2, *p2, *t2;
int main()
{
int m, n;
cin >> m >> n;
h1 = new tree;
h2 = new tree;
h1 -> next = NULL;
h2 -> next = NULL;
t1 = h1;
t2 = h2;
// 开始建链表
while(m--){
p1 = new tree;
cin >> p1 -> data;
p1 -> next = NULL;
t1 -> next = p1;
t1 = p1;
}
while(n--){
p2 = new tree;
cin >> p2 -> data;
p2 -> next = NULL;
t2 -> next = p2;
t2 = p2;
}
// (开始操作hhh) 再建一个链表
struct node *h, *p, *t;
h = h1;
p1 = h1 -> next;
p2 = h2 -> next;
free(h2);// 释放链表二的头部
t = h1;// 第三个表的尾指针指向第一个表的头部,(尾插法吧?)
while(p1 && p2){// 当两个链表都没遍历完时
// 谁小谁在前
if(p1 -> data < p2 -> data){
t -> next = p1;
t = p1;
p1 = p1 -> next;
}
else{
t -> next = p2;
t = p2;
p2 = p2 -> next;
}
// 总有一个先遍历完,对吧
if(p1 != 0){
t -> next = p1;
}
else{
t -> next = p2;
}
}
// 输出辣
p = h -> next;
while(p -> next){
cout << p -> data << " " ;
p = p -> next;
}
cout << p -> data ;
system("pause");
return 0;
}
G - 数据结构实验之链表五:单链表的拆分
Description
输入N个整数顺序建立一个单链表,将该单链表拆分成两个子链表,第一个子链表存放了所有的偶数,第二个子链表存放了所有的奇数。两个子链表中数据的相对次序与原链表一致。
Input
第一行输入整数N;;
第二行依次输入N个整数。
Output
第一行分别输出偶数链表与奇数链表的元素个数;
第二行依次输出偶数子链表的所有数据;
第三行依次输出奇数子链表的所有数据。
Sample
Input
10 1 3 22 8 15 999 9 44 6 1001
Output
4 6 22 8 44 6 1 3 15 999 9 1001
Hint
不得使用数组!
// 代码较长,如果想更加清晰最好利用函数!
#include<bits/stdc++.h>
using namespace std;
struct node *star(int n);// 建表函数
void division(struct node *h, struct node *h1, struct node *h2, int *data1, int *data2);// 拆分函数
void print(struct node *h);// 输出函数
typedef struct node
{
int data;
struct node *next;
}tree;
// 思路与上一题差不多。不过是先建一个链表 再建两个链表
int main()
{
int n, data1 = 0, data2 = 0;
struct node *h;
struct node *h1, *h2;
h1 = new tree;
h1 -> next = NULL;
h2 = new tree;
h2 -> next = NULL;
cin >> n;
h = star(n);
division(h, h1, h2, &data1, &data2);
cout << data1 << " " << data2 << endl;
print(h1);
print(h2);
system("pause");
return 0;
}
struct node *star(int n)
{
struct node *h, *p, *t;
h = new tree;
h -> next = NULL;
t = h;
for(int i = 0; i < n; i++){
p = new tree;
p -> next = NULL;
cin >> p -> data;
t -> next = p;
t = p;
}
return (h);
}
void division(struct node *h, struct node *h1, struct node *h2, int *data1, int *data2)
{
struct node *p = h -> next;
struct node *t1 = h1, *t2 = h2;
free(h);
while(p){
if(p -> data % 2 == 0){// 偶数
t1 -> next = p;
t1 = p;
p = p -> next;
t1 -> next = NULL;
(*data1)++;// 好神奇!
}
else{// 奇数
t2 -> next = p;
t2 = p;
p = p -> next;
t2 -> next = NULL;
(*data2)++;
}
}
}
void print(struct node *h)
{
struct node *p = h -> next;
while(p){
if(p != NULL){
cout << p -> data << " ";
}
else{
cout << p -> data;
}
p = p -> next;
}
cout << endl;
}
H - 数据结构实验之链表九:双向链表
Description
学会了单向链表,我们又多了一种解决问题的能力,单链表利用一个指针就能在内存中找到下一个位置,这是一个不会轻易断裂的链。但单链表有一个弱点——不能回指。比如在链表中有两个节点A,B,他们的关系是B是A的后继,A指向了B,便能轻易经A找到B,但从B却不能找到A。一个简单的想法便能轻易解决这个问题——建立双向链表。在双向链表中,A有一个指针指向了节点B,同时,B又有一个指向A的指针。这样不仅能从链表头节点的位置遍历整个链表所有节点,也能从链表尾节点开始遍历所有节点。对于给定的一列数据,按照给定的顺序建立双向链表,按照关键字找到相应节点,输出此节点的前驱节点关键字及后继节点关键字。
Input
第一行两个正整数n(代表节点个数),m(代表要找的关键字的个数)。第二行是n个数(n个数没有重复),利用这n个数建立双向链表。接下来有m个关键字,每个占一行。
Output
对给定的每个关键字,输出此关键字前驱节点关键字和后继节点关键字。如果给定的关键字没有前驱或者后继,则不输出。
注意:每个给定关键字的输出占一行。一行输出的数据之间有一个空格,行首、行末无空格。
Sample
Input
10 3 1 2 3 4 5 6 7 8 9 0 3 5 0
Output
2 4 4 6 9
#include<bits/stdc++.h>
using namespace std;
typedef struct node
{
int data;
struct node *next;
struct node *before;
}tree;
int main()
{
int n, m, x;
struct node *h, *p, *t;
h = new tree;
h -> next = NULL;
t = h;
cin >> n >> m;
for(int i = 0; i < n; i++){
p = new tree;
cin >> p -> data;
p -> next = NULL;
t -> next = p;
p -> before = t;
t = p;
}
for(int i = 1; i <= m; i++){
int j = 0;
cin >> x;
for(p = h -> next; p != NULL; p = p -> next){
j++;
if(j == n && p -> data == x){
cout << p -> before -> data << endl;
}
else if(j== 1 && p -> data == x){
cout << p -> next -> data << endl;
}
else if(p -> data == x){
cout << p -> before -> data << " " << p -> next -> data << endl;
}
}
}
system("pause");
return 0;
}
I - 约瑟夫问题
Description
n个人想玩残酷的死亡游戏,游戏规则如下:
n个人进行编号,分别从1到n,排成一个圈,顺时针从1开始数到m,数到m的人被杀,剩下的人继续游戏,活到最后的一个人是胜利者。
请输出最后一个人的编号。
Input
输入n和m值。
Output
输出胜利者的编号。
Sample
Input
5 3
Output
4
Hint
第一轮:3被杀第二轮:1被杀第三轮:5被杀第四轮:2被杀
#include<bits/stdc++.h>
using namespace std;
struct node *creat(int n);
int sel(struct node *h,int m, int n);
typedef struct node
{
int num;
struct node *next;
}tree;
int main()
{
int n, m;
struct node *h;
cin >> n >> m;
h = creat(n);
cout << sel(h, m, n);
system("pause");
return 0;
}
struct node *creat(int n)// 创建链表 的函数
{
struct node *h, *p, *t;
p = new tree;
p -> num = 1;
p -> next = NULL;
h = p;
t = p;
for(int i = 2; i <= n; i++){
p = new tree;
p -> num = i;// 不同之处:这个链表里的数是 1、2、3……
t -> next = p;
t = p;
p -> next = NULL;
}
t ->next = h;// 不同之处:最后一个节点的指针域指向第一个节点
return h;
}
int sel(struct node *h,int m, int n)
{
int num = 0;// 表示报数计数的计数变量
struct node *p, *q;// 分别指向当前节点及其前驱动点的指针
q = h;
while(q -> next != h){
q = q -> next;// 使前驱动点指向尾节点
}
while(q -> next != q){// 若q -> next == q,则说明此时链表只剩一个节点了
p = q -> next;
num++;
if(num % m == 0){
q -> next = p -> next;// 删去了p
free(p);// 释放p。养成好习惯1
}
else{
q = p;
}
}
return q -> num;
}
// 我好没用啊
J - 不敢死队问题
Description
说到“敢死队”,大家不要以为我来介绍电影了,因为数据结构里真有这么道程序设计题目,原题如下:
有M个敢死队员要炸掉敌人的一个碉堡,谁都不想去,排长决定用轮回数数的办法来决定哪个战士去执行任务。如果前一个战士没完成任务,则要再派一个战士上去。现给每个战士编一个号,大家围坐成一圈,随便从某一个战士开始计数,当数到5时,对应的战士就去执行任务,且此战士不再参加下一轮计数。如果此战士没完成任务,再从下一个战士开始数数,被数到第5时,此战士接着去执行任务。以此类推,直到任务完成为止。
这题本来就叫“敢死队”。“谁都不想去”,就这一句我觉得这个问题也只能叫“不敢死队问题”。今天大家就要完成这道不敢死队问题。我们假设排长是1号,按照上面介绍,从1号开始数,数到5的那名战士去执行任务,那么排长是第几个去执行任务的?
Input
输入包括多组数据,每组一行,包含一个整数M(0<=M<=10000)(敢死队人数),若M==0,输入结束,不做处理。
Output
输出一个整数n,代表排长是第n个去执行任务。
Sample
Input
9 6 223 0
Output
2 6 132
#include<bits/stdc++.h>
using namespace std;
struct node *creat(int n);
int sel(struct node *h,int m, int a);
typedef struct node
{
int num;
struct node *next;
}tree;
int main()
{
int m;
int a = 5;
struct node *h;
while(cin >> m){
if(m == 0){
return 0;
}
else{
h = creat(m);
cout << sel(h, m, a) << endl;
}
}
system("pause");
return 0;
}
struct node *creat(int m)// 创建链表 的函数
{
struct node *h, *p, *t;
p = new tree;
p -> num = 1;
p -> next = NULL;
h = p;
t = p;
for(int i = 2; i <= m; i++){
p = new tree;
p -> num = i;// 不同之处:这个链表里的数是 1、2、3……
t -> next = p;
t = p;
p -> next = NULL;
}
t ->next = h;// 不同之处:最后一个节点的指针域指向第一个节点
return h;
}
int sel(struct node *h,int m, int a)
{
int num = 0;// 表示报数计数的计数变量
int cnt = 0;
struct node *p, *q;// 分别指向当前节点及其前驱动点的指针
q = h;
while(q -> next != h){
q = q -> next;// 使前驱动点指向尾节点
}
while(cnt < m - 1){// 若q -> next == q,则说明此时链表只剩一个节点了
p = q -> next;
num++;
if(num % a == 0){
if(p -> num == 1){
break;
}
else{
q -> next = p -> next;// 删去了p
free(p);// 释放p。养成好习惯1
cnt++;
}
}
else{
q = p;
}
}
return (cnt+1);
}
// 我是fw
**和上一题基本一样