hcip暑假第二次作业

ip配置如下

配置缺省路由

[R1]ip route-static 0.0.0.0 0 12.0.0.2 -------设置缺省路由
[R1]ip route-static 0.0.0.0 0 21.0.0.2

[R2]ip route-static 0.0.0.0 0 22.0.0.2

[R3]ip route-static 0.0.0.0 0 23.0.0.2

[R4]ip route-static 0.0.0.0 0 24.0.0.2

[R5]ip route-static 0.0.0.0 0 25.0.0.2

实验实现：
1.IP配置
R1
[R1]int   g 0/0/0
[R1-GigabitEthernet0/0/0]ip address 12.0.0.1 24
[R1-GigabitEthernet0/0/0]q
[R1]int g 0/0/1
[R1-GigabitEthernet0/0/1]ip address 21.0.0.1 24
[R1-GigabitEthernet0/0/1]q
[R1]int l0
[R1-LoopBack0]ip address 192.168.1.1 24

R2
[R2]int g 0/0/0
[R2-GigabitEthernet0/0/0]ip address 22.0.0.1 24
[R2-GigabitEthernet0/0/0]q
[R2]int l0
[R2-LoopBack0]ip address 192.168.2.1 24

R3
[R3]int g 0/0/0   
[R3-GigabitEthernet0/0/0]ip address 23.0.0.1 24
[R3-GigabitEthernet0/0/0]q
[R3]int l0
[R3-LoopBack0]ip address 192.168.3.1 24

R4
[R4]int g 0/0/0
[R4-GigabitEthernet0/0/0]ip address 24.0.0.1 24
[R4-GigabitEthernet0/0/0]q
[R4]int l0
[R4-LoopBack0]ip address 192.168.4.1 24

R5
[R5]int g 0/0/0
[R5-GigabitEthernet0/0/0]ip address 25.0.0.1 24
[R5-GigabitEthernet0/0/0]q
[R5]int l0
[R5-LoopBack0]ip address 192.168.5.1 24

R6
[ISP]int g 0/0/0
[ISP-GigabitEthernet0/0/0]ip address 12.0.0.2 24
[ISP-GigabitEthernet0/0/0]q
[ISP]int g 0/0/1
[ISP-GigabitEthernet0/0/1]ip address 21.0.0.2 24 
[ISP-GigabitEthernet0/0/1]q
[ISP]int g 2/0/0
[ISP-GigabitEthernet2/0/0]ip address 22.0.0.2 24
[ISP-GigabitEthernet2/0/0]q
[ISP]int g 3/0/0
[ISP-GigabitEthernet3/0/0]ip address 23.0.0.2 24
[ISP-GigabitEthernet3/0/0]q
[ISP]int g 4/0/0
[ISP-GigabitEthernet4/0/0]ip address 24.0.0.2 24
[ISP-GigabitEthernet4/0/0]q
[ISP]int g 0/0/2
[ISP-GigabitEthernet0/0/2]ip address 25.0.0.2 24

2.设备配置—全连MGRE
R1
[R1]int t 0/0/0 
[R1-Tunnel0/0/0]ip address 192.168.6.1 24
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp     
[R1-Tunnel0/0/0]source 21.0.0.1
[R1-Tunnel0/0/0]nhrp entry multicast dynamic 
[R1-Tunnel0/0/0]nhrp entry 192.168.6.2 24.0.0.1 register 
[R1-Tunnel0/0/0]nhrp entry 192.168.6.3 25.0.0.1 register
[R1-Tunnel0/0/0]nhrp network-id  100

R4
[R4]int t 0/0/0
[R4-Tunnel0/0/0]ip address 192.168.6.2 24
[R4-Tunnel0/0/0]tunnel-protocol gre p2mp   
[R4-Tunnel0/0/0]source 24.0.0.1
[R4-Tunnel0/0/0]nhrp network-id 100
[R4-Tunnel0/0/0]nhrp entry multicast dynamic 
[R4-Tunnel0/0/0]nhrp entry 192.168.6.1 21.0.0.1 register             
[R4-Tunnel0/0/0]nhrp entry 192.168.6.3 25.0.0.1 register 

R5
[R5]int t 0/0/0
[R5-Tunnel0/0/0]ip address 192.168.6.3 24
[R5-Tunnel0/0/0]tunnel-protocol gre p2mp  
[R5-Tunnel0/0/0]source 25.0.0.1
[R5-Tunnel0/0/0]nhrp network-id 100   
[R5-Tunnel0/0/0]nhrp entry multicast d    
[R5-Tunnel0/0/0]nhrp entry multicast dynamic 
[R5-Tunnel0/0/0]nhrp entry 192.168.6.1 21.0.0.1 r

测试
用R1去pingR4和R5，查看是否能ping通

3.设备配置—星型MGRE
R1
[R1]int t 0/0/1
[R1-Tunnel0/0/1]ip address 192.168.7.1 24   
[R1-Tunnel0/0/1]tunnel-protocol gre p2mp 
[R1-Tunnel0/0/1]source 12.0.0.1 
[R1-Tunnel0/0/1]nhrp network-id 200
[R1-Tunnel0/0/1]nhrp entry multicast dynamic 

R2
[R2]int t 0/0/0    
[R2-Tunnel0/0/0]ip address 192.168.7.2 24  
[R2-Tunnel0/0/0]tunnel-protocol gre p2mp  
[R2-Tunnel0/0/0]source 22.0.0.1
[R2-Tunnel0/0/0]nhrp network-id 200
[R2-Tunnel0/0/0]nhrp entry 192.168.7.1 12.0.0.1 register 

R3
[R3]int t 0/0/0
[R3-Tunnel0/0/0]ip address 192.168.7.3 24   
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp  
[R3-Tunnel0/0/0]source 23.0.0.1
[R3-Tunnel0/0/0] nhrp network-id 200
[R3-Tunnel0/0/0] nhrp entry 192.168.7.1 12.0.0.1 register

测试
用R1去pingR2和R3，查看是否能ping通

4.设备配置—OSPF
R1
[R1]ospf 1 router-id 1.1.1.1
[R1-ospf-1]ar    
[R1-ospf-1]area 0
[R1-ospf-1-area-0.0.0.0]network 192.168.1.0 0.0.0.255
[R1-ospf-1-area-0.0.0.0]network 192.168.6.0 0.0.0.255
[R1-ospf-1-area-0.0.0.0]network 192.168.7.0 0.0.0.255
[R1-ospf-1-area-0.0.0.0]int t 0/0/0 
[R1-Tunnel0/0/0]ospf network-type broadcast 
[R1]int t 0/0/1
[R1-Tunnel0/0/1]ospf network-type p2mp

R2
[R2]ospf 1 router-id 2.2.2.2  
[R2-ospf-1]area 0
[R2-ospf-1-area-0.0.0.0]network 192.168.2.0 0.0.0.255
[R2-ospf-1-area-0.0.0.0]network 192.168.7.0 0.0.0.255
[R2-ospf-1-area-0.0.0.0]q
[R2-ospf-1]q
[R2]int t 0/0/0
[R2-Tunnel0/0/0]ospf network-type p2mp

R3
[R3]ospf 1 router-id 3.3.3.3
[R3-ospf-1]area 0
[R3-ospf-1-area-0.0.0.0]network  192.168.3.0 0.0.0.255
[R3-ospf-1-area-0.0.0.0]network 192.168.7.0 0.0.0.255
[R3-ospf-1-area-0.0.0.0]int t 0/0/0
[R3-Tunnel0/0/0]ospf network-type p2mp

R4
[R4]ospf 1 router-id 4.4.4.4 
[R4-ospf-1]area 0
[R4-ospf-1-area-0.0.0.0]network 192.168.4.0 0.0.0.255
[R4-ospf-1-area-0.0.0.0]network 192.168.6.0 0.0.0.255
[R4-ospf-1-area-0.0.0.0]int t 0/0/0
[R4-Tunnel0/0/0]ospf network-type broadcast 

R5
[R5]ospf 1 router-id 5.5.5.5 
[R5-ospf-1]area 0    
[R5-ospf-1-area-0.0.0.0]network 192.168.5.0 0.0.0.255
[R5-ospf-1-area-0.0.0.0]network 192.168.6.0 0.0.0.255
[R5-ospf-1-area-0.0.0.0]int t 0/0/0
[R5-Tunnel0/0/0]ospf network-type broadcast 

测试
用R1的环回去pingR3的环回和R4的环回，查看是否能ping通