hcip暑假班第一次作业

于 2024-07-08 19:19:08 发布
阅读量816 收藏 7
点赞数 13
文章标签： 网络 服务器 运维
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/qq_64997328/article/details/140276839
版权

R1

<r1>sys    
Enter system view, return user view with Ctrl+Z.
[r1]interface Serial 4/0/0
[r1-Serial4/0/0]ppp pap local-user R1 password cipher 123456
[r1-Serial4/0/0]system-view
                ^
Error: Unrecognized command found at '^' position.
[r1-Serial4/0/0]sysname R1
[R1]interface Serial 4/0/0
[R1-Serial4/0/0]ppp pap local-user R1 password cipher 123456
[R1-Serial4/0/0]q
[R1]ip route-static 0.0.0.0 0 15.0.0.2
[R1]interface Tunnel 0/0/0
[R1-Tunnel0/0/0]ip address 192.168.5.1 24
[R1-Tunnel0/0/0]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R1>sys
Enter system view, return user view with Ctrl+Z.
[R1]tunnel-protocol gre p2mp 
    ^
Error: Unrecognized command found at '^' position.
[R1]interface Tunnel 0/0/0
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp
[R1-Tunnel0/0/0]source 15.0.0.1
Jul  8 2024 12:51:23-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 
[R1-Tunnel0/0/0]
[R1-Tunnel0/0/0]nhrp network-id 100
[R1-Tunnel0/0/0]interface Tunnel 0/0/1
[R1-Tunnel0/0/1]ip address 192.168.6.1 24
[R1-Tunnel0/0/1]tunnel-protocol gre
[R1-Tunnel0/0/1]source 15.0.0.1
[R1-Tunnel0/0/1]destination 45.0.0.1
Jul  8 2024 12:54:56-08:00 R1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface Tunnel0/0/1 has entered the UP state. 
[R1-Tunnel0/0/1]
[R1-Tunnel0/0/1]rip
[R1-rip-1]version 2
[R1-rip-1]network 192.168.1.0
[R1-rip-1]network 192.168.5.0
[R1-rip-1]network 192.168.6.0
[R1-rip-1]interface Tunnel 0/0/0
[R1-Tunnel0/0/0]nhrp entry multicast dynamic
[R1-Tunnel0/0/0]undo rip split-horizon 
[R1-Tunnel0/0/0]

R2配置
<r2>sys    
Enter system view, return user view with Ctrl+Z.
[r2]sysname R2
[R2]interface Serial 4/0/0
[R2-Serial4/0/0]ppp chap user R2
[R2-Serial4/0/0]PPP chap password cipher 123456
[R2-Serial4/0/0]q
[R2]ip route-static 0.0.0.0 0 25.0.0.2
[R2]interface Tunnel 0/0/0
[R2-Tunnel0/0/0]ip address 192.168.5.2 24

[R2-Tunnel0/0/0]ip address 192.168.5.2 24
Error: The address already exists.
[R2-Tunnel0/0/0]
[R2-Tunnel0/0/0]
[R2-Tunnel0/0/0]
[R2-Tunnel0/0/0]ip address 192.168.5.2 24
Error: The address already exists.
[R2-Tunnel0/0/0]ip address 192.168.5.2 24
Error: The address already exists.
[R2-Tunnel0/0/0]ip address 192.168.5.2 24
Error: The address already exists.
[R2-Tunnel0/0/0]ip address 192.168.5.2 24
Error: The address already exists.
[R2-Tunnel0/0/0]ip address 192.168.5.2 24
Error: The address already exists.
[R2-Tunnel0/0/0]ip address 192.168.5.2 24
Error: The address already exists.
[R2-Tunnel0/0/0]q
[R2]interface Tunnel 0/0/0
[R2-Tunnel0/0/0]interface Tunnel 0/0/0
[R2-Tunnel0/0/0]ip address 192.168.5.2 24
Error: The address already exists.
[R2-Tunnel0/0/0]interface Serial 4/0/0
[R2-Serial4/0/0]ppp chap user R2
[R2-Serial4/0/0]PPP chap password cipher 123456
[R2-Serial4/0/0]ip route-static 0.0.0.0 0 25.0.0.2
Error: The route already exists.
[R2]ip route-static 0.0.0.0 0 25.0.0.2
Error: The route already exists.
[R2]ip route-static 0.0.0.0 0 25.0.0.2
Error: The route already exists.
[R2]interface Serial 4/0/0
[R2-Serial4/0/0]ppp chap user R2
[R2-Serial4/0/0]PPP chap password cipher 123456
[R2-Serial4/0/0]interface Tunnel 0/0/0
[R2-Tunnel0/0/0]ip address 192.168.5.2 24
Error: The address already exists.
[R2-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R2-Tunnel0/0/0]source Serial 4/0/0
Jul  8 2024 12:51:40-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 
[R2-Tunnel0/0/0]
[R2-Tunnel0/0/0]nhrp network-id 100
[R2-Tunnel0/0/0]nhrp entry 192.168.5.1 15.0.0.1 register 
[R2-Tunnel0/0/0]rip
[R2-rip-1]version 2
[R2-rip-1]network 192.168.2.0
[R2-rip-1]network 192.168.5.0


R3配置
<r3>sys
Enter system view, return user view with Ctrl+Z.
[r3]sysname R3
[R3]interface Serial 4/0/0
[R3-Serial4/0/0]link-protocol hdlc
Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]
:y
Jul  8 2024 12:37:38-08:00 R3 %%01IFNET/4/CHANGE_ENCAP(l)[0]:The user performed 
the configuration that will change the encapsulation protocol of the link and th
en selected Y. 
[R3-Serial4/0/0]
[R3-Serial4/0/0]
Jul  8 2024 12:37:38-08:00 R3 %%01IFPDT/4/IF_STATE(l)[1]:Interface Serial4/0/0 h
as turned into DOWN state.
[R3-Serial4/0/0]
Jul  8 2024 12:37:39-08:00 R3 %%01IFPDT/4/IF_STATE(l)[2]:Interface Serial4/0/0 h
as turned into UP state.
[R3-Serial4/0/0]
Jul  8 2024 12:37:39-08:00 R3 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP 
on the interface Serial4/0/0 has entered the UP state. 
[R3-Serial4/0/0]q
[R3]ip route-static 0.0.0.0 0 35.0.0.2
[R3]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R3>sys
Enter system view, return user view with Ctrl+Z.
[R3]interface Tunnel 0/0/0
[R3-Tunnel0/0/0]ip address 192.168.5.3 24
[R3-Tunnel0/0/0]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R3>sys
Enter system view, return user view with Ctrl+Z.
[R3]interface Tunnel 0/0/0
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R3-Tunnel0/0/0]source Serial 4/0/0
Jul  8 2024 12:51:52-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 
[R3-Tunnel0/0/0]
[R3-Tunnel0/0/0]nhrp network-id 100
[R3-Tunnel0/0/0]nhrp entry 192.168.5.1 15.0.0.1 register 
[R3-Tunnel0/0/0]rip
[R3-rip-1]ersion 2
          ^
Error: Unrecognized command found at '^' position.
[R3-rip-1]version 2
[R3-rip-1]network 192.168.4.0
[R3-rip-1]network 192.168.6.0
[R3-rip-1]

R4配置
The device is running!

<R4>sys
Enter system view, return user view with Ctrl+Z.
[R4]ip route-static 0.0.0.0 0 45.0.0.2
[R4]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R4>
<R4>sys
Enter system view, return user view with Ctrl+Z.
[R4]interface Tunnel 0/0/1
[R4-Tunnel0/0/1]ip address 192.168.6.2 24
[R4-Tunnel0/0/1]tunnel-protocol gre
[R4-Tunnel0/0/1]source 45.0.0.1
[R4-Tunnel0/0/1]destination 15.0.0.1
Jul  8 2024 12:53:41-08:00 R4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/1 has entered the UP state. 
[R4-Tunnel0/0/1]
[R4-Tunnel0/0/1]rip
[R4-rip-1]version 2
[R4-rip-1]network 192.168.3.0
[R4-rip-1]network 192.168.5.0
[R4-rip-1]

R5配置
<ISP>sys    
<ISP>system-view
Enter system view, return user view with Ctrl+Z.
[ISP]aaa
[ISP-aaa]local-user R1 password cipher 123456
Info: Add a new user.
[ISP-aaa]local-user R1 service-type ppp
[ISP-aaa]interface serial 3/0/0
[ISP-Serial3/0/0]link-protocol ppp
[ISP-Serial3/0/0]ppp authentication-mode  pap
[ISP-Serial3/0/0]cd/
                 ^
Error: Unrecognized command found at '^' position.
[ISP-Serial3/0/0]cd 
                 ^
Error: Unrecognized command found at '^' position.
[ISP-Serial3/0/0]aaa
[ISP-aaa]local-user R2 password cipher 123456
Info: Add a new user.
[ISP-aaa]local-user R2 service-type ppp
[ISP-aaa]interface Serial 3/0/1
[ISP-Serial3/0/1]ppp authentication-mode  chap 
[ISP-Serial3/0/1]q
[ISP]interface Serial 4/0/0
[ISP-Serial4/0/0]link-protocol hdlc
Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]
:y
Jul  8 2024 12:36:36-08:00 ISP %%01IFNET/4/CHANGE_ENCAP(l)[0]:The user performed
 the configuration that will change the encapsulation protocol of the link and t
hen selected Y. 
[ISP-Serial4/0/0]
Jul  8 2024 12:36:36-08:00 ISP %%01PPP/4/PHYSICALDOWN(l)[1]:On the interface Ser
ial4/0/0, PPP link was closed because the status of the physical layer was Down.

[ISP-Serial4/0/0]
Jul  8 2024 12:36:36-08:00 ISP %%01IFNET/4/LINK_STATE(l)[2]:The line protocol PP
P on the interface Serial4/0/0 has entered the DOWN state. 
[ISP-Serial4/0/0]
Jul  8 2024 12:36:36-08:00 ISP %%01IFNET/4/LINK_STATE(l)[3]:The line protocol PP
P IPCP on the interface Serial4/0/0 has entered the DOWN state. 
[ISP-Serial4/0/0]
Jul  8 2024 12:36:36-08:00 ISP %%01IFPDT/4/IF_STATE(l)[4]:Interface Serial4/0/0 
has turned into DOWN state.
[ISP-Serial4/0/0]
Jul  8 2024 12:36:37-08:00 ISP %%01IFPDT/4/IF_STATE(l)[5]:Interface Serial4/0/0 
has turned into UP state.
[ISP-Serial4/0/0]
Jul  8 2024 12:36:37-08:00 ISP %%01IFNET/4/LINK_STATE(l)[6]:The line protocol IP
 on the interface Serial4/0/0 has entered the UP state. 
[ISP-Serial4/0/0]q
[ISP]
Jul  8 2024 12:37:37-08:00 ISP %%01IFNET/4/LINK_STATE(l)[7]:The line protocol IP
 on the interface Serial4/0/0 has entered the DOWN state. 
[ISP]
Jul  8 2024 12:37:48-08:00 ISP %%01IFNET/4/LINK_STATE(l)[8]:The line protocol IP
 on the interface Serial4/0/0 has entered the UP state. 
[ISP]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<ISP>sys
Enter system view, return user view with Ctrl+Z.
[ISP]aaa
[ISP-aaa]local-user R2 password cipher 123456
[ISP-aaa]local-user R2 service-type ppp
[ISP-aaa]interface Serial 3/0/1
[ISP-Serial3/0/1]ppp authentication-mode  chap
[ISP-Serial3/0/1]

周越飞
关注
  • 13
    点赞
  • 踩
  • 7
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
2021-08-06软考网工的一个简单的综合实验
akswyh的博客
08-06 1725
拓扑： PC1和PC2都设置成dhcp获取ip，PC1属于10网段，标记为教学区；PC2属于20网段，标记为宿舍区 LSW1作为接入交换机 LSW2作为核心交换机 AR1作为外网入口 AR2表示电信运营商的路由器 AR3表示联通运营商的路由器 基本配置： LSW1： [acsw]vlan batch 10 20 Info: This operation may take a few seconds. Please wait for a moment...done. [acsw]int g0/0/1 [ac
2021-05-24
m0_56229717的博客
05-24 710
R1 The device is running! <Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]sysname r1 [r1]intefa [r1]intefag [r1]inte [r1]interface g [r1]interface GigabitEthernet 0/0/1 [r1-GigabitEthernet0/0/1]ip add [r1-...
IP复习第十天 VLAN间互通
m0_56229717的博客
07-18 1096
代码 Please press enter to start cmd line! ################################################################################ ################################################ <Huawei> Jul 18 2021 16:59:31-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Inte....
云计算第3日
tttxhfgb的博客
11-15 365
1下发固定ip2排除[r5]ip[r5]in[r5]hd[r5]dh[r5]in。
DHCP实验
WyzDream的博客
01-05 617
实验要求：PC通过DHCP获取IP地址，所有PC可以互相访问 实验步骤： 1.给路由器配置IP地址 [R1]int g0/0/0 [R1-GigabitEthernet0/0/0]ip address 192.168.1.1 24 [R1-GigabitEthernet0/0/0]int g0/0/1 [R1-GigabitEthernet0/0/1]ip address 192.168.2.1 24 2.在路由器上配置DHCP [R1]dhcp enable 开启DHCP服务 [R1]ip p.
HCIP的第一次不完整作业
07-18
HCIP的第一次不完整作业
hcip第二次作业.topo
07-09
hcip第二次作业.topo
HCIP第二次作业的topo
07-03
压缩包
HCIP，OSPF综合实验，第四次作业
08-05
OSPF MGRE
ensp之RIP小实验
AXDRXS的博客
07-23 391
对其进行子网划分，网络位借一位：192.168.1.128/27。对其进行子网划分，网络位借一位：192.168.1.192/27。环回汇总：[r1]192.168.1.128/26。环回汇总：[r2]192.168.1.192/26。[r3]一个环回接口L0：3.3.3.3/24。骨干链路：192.168.1.0/26。
HCIA第二天作业
qq_49310821的博客
07-08 140
ip配置 [R1]interface s0/0/0 [R1-Serial0/0/0]ip add [R1-Serial0/0/0]ip address 192.168.1.1 24 [R1]interface LoopBack 0 [R1-LoopBack0]ip address 1.1.1.1 [R2]interface s0/0/0 [R2-Serial0/0/0]ip add [R2-Serial0/0/0]ip address 192.168.2.1 24 [R2]interface L
2021-05-20
m0_56229717的博客
05-20 869
题目要求 拓扑图 R1 on the interface GigabitEthernet0/0/1 has entered the UP state. [r1-GigabitEthernet0/0/1] Please check whether system data has been changed, and save data in time Configuration console time...
第三章----综合实验
最新发布
2301_80656891的博客
04-02 617
8.使用NAT技术创建ACL放通内网流量。开启R1伪广播，关闭RIP水平分割。
计算机网络之广域网基础以及华为eNSP实验配置
爱学习的JackYang的博客
08-02 4559
计算机网络 广域网 华为 eNSP PPP协议 PPPOE协议 PAP认证 CHAP认证
小白学习一eNSP华为模拟器（17）PPP的认证
qq_46112068的博客
05-22 1929
大家好! 我叫风清云淡,有句话说“相识是缘”，我也希望多多认识一些志同道和的朋友。作为一名互联网行业的小萌新，写博客一方面是为了记录自己的学习过程，另一方面是总结自己所犯的错误希望能够帮助到很多和自己一样处于起步阶段的萌新。但由于其专业水平有限????，博客中难免会有一些bug出现，有错误之处还请各位大佬多多赐教 由于现在越来越多的人未经本人同意直接爬取博主本人文章，博主在此特别声明：未经本人允许，禁止转载！！！ 文章目录实验二十二PPP的认证实验内容实验步骤1、基本配置2、搭建OSPF网络3、配置PP
华为多臂路由_网络小白学网工笔记（1）：单臂路由实验
weixin_39682477的博客
01-12 556
####################华为单臂路由试验#############################交换机配置#########system-viewEnter system view, return user view with Ctrl+Z.[Huawei]interface GigabitEthernet0/0/1[Huawei-GigabitEthernet0/0/1]por...
华为交换机更换端口连接模式报错处理Error: Please renew the default configurations.
热门推荐
sxjk1987的专栏
09-26 2万+
[Huawei-GigabitEthernet0/0/1]port link-type hybrid Error: Please renew the default configurations. 华为交换机 变更端口link-type时报错Error: Please renew the default configurations. 需要先删除端口其他配置后再重新变更端口类型。 比如： ...
华为DHCP global
weixin_34189116的博客
04-18 442
R1关键配置如下：dhcp enableip pool 1gateway-list 10.10.100.1network 10.10.100.0 mask 255.255.255.0dns-list 10.10.10.10#ip pool 2gateway-list 10.10.200.1network 10.10.200.0 mask 255.255.25...
HCIP 数通路由交换作业笔记.docx
10-22
HCIP 数通路由交换作业笔记.docx

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值