DSP28335流水灯显示程序

最新推荐文章于 2024-01-22 18:58:20 发布

今天星期几244

最新推荐文章于 2024-01-22 18:58:20 发布

阅读量1.1k

点赞数

文章标签：单片机嵌入式硬件

本文链接：https://blog.csdn.net/qq_69560540/article/details/128429484

版权

main.c

#include "DSP2833x_Device.h" // DSP2833x Headerfile Include File
#include "DSP2833x_Examples.h" // DSP2833x Examples Include File

#include "leds.h"

void delay(void)
{
Uint16        i;
   Uint32 j;
   for(i=0;i<32;i++)
       for (j = 0; j < 10000; j++);
}
void main()
{
    InitSysCtrl();

LED_Init();

   while(1)
   {
       LED1_TOGGLE;
       delay();
       LED2_TOGGLE;
       delay();
       LED3_TOGGLE;
       delay();
       LED4_TOGGLE;
       delay();
       LED5_TOGGLE;
       delay();
       LED6_TOGGLE;
       delay();
       LED7_TOGGLE;
       delay();
   }

}

leds.c
#include "leds.h"

void LED_Init(void)
{
EALLOW;
SysCtrlRegs.PCLKCR3.bit.GPIOINENCLK = 1;// 开启GPIO时钟

   //LED1端口配置
   GpioCtrlRegs.GPCMUX1.bit.GPIO68=0;//设置为通用GPIO功能
   GpioCtrlRegs.GPCDIR.bit.GPIO68=1;//设置GPIO方向为输出
   GpioCtrlRegs.GPCPUD.bit.GPIO68=0;//使能GPIO上拉电阻

   //LED2端口配置
   GpioCtrlRegs.GPCMUX1.bit.GPIO67=0;
   GpioCtrlRegs.GPCDIR.bit.GPIO67=1;
   GpioCtrlRegs.GPCPUD.bit.GPIO67=0;

   //LED3端口配置
   GpioCtrlRegs.GPCMUX1.bit.GPIO66=0;
   GpioCtrlRegs.GPCDIR.bit.GPIO66=1;
   GpioCtrlRegs.GPCPUD.bit.GPIO66=0;

   //LED4端口配置
   GpioCtrlRegs.GPCMUX1.bit.GPIO65=0;
   GpioCtrlRegs.GPCDIR.bit.GPIO65=1;
   GpioCtrlRegs.GPCPUD.bit.GPIO65=0;

   //LED5端口配置
   GpioCtrlRegs.GPCMUX1.bit.GPIO64=0;
   GpioCtrlRegs.GPCDIR.bit.GPIO64=1;
   GpioCtrlRegs.GPCPUD.bit.GPIO64=0;

   //LED6端口配置
   GpioCtrlRegs.GPAMUX1.bit.GPIO10=0;
   GpioCtrlRegs.GPADIR.bit.GPIO10=1;
   GpioCtrlRegs.GPAPUD.bit.GPIO10=0;

   //LED7端口配置
   GpioCtrlRegs.GPAMUX1.bit.GPIO11=0;
   GpioCtrlRegs.GPADIR.bit.GPIO11=1;
   GpioCtrlRegs.GPAPUD.bit.GPIO11=0;

   GpioDataRegs.GPCSET.bit.GPIO68=1;
   GpioDataRegs.GPCSET.bit.GPIO67=1;
   GpioDataRegs.GPCSET.bit.GPIO66=1;
   GpioDataRegs.GPCSET.bit.GPIO65=1;
   GpioDataRegs.GPCSET.bit.GPIO64=1;
   GpioDataRegs.GPASET.bit.GPIO10=1;
   GpioDataRegs.GPASET.bit.GPIO11=1;

EDIS;
}