vlan实验

一.实验拓扑

二.实验要求

1.     pc1和pc3所在接口为access;属于vlan 2;

        pc2/pc4/pc5/pc6处于同一网段;其中pc2可以访问pc4/pc5/pc6;

        pc4可以访问pc6;pc5不能把访问pc6

2.     pc1/pc3与pc2/pc4/pc5/pc6不在同一网段;

3.     所有pc通过DHCP获取IP地址,且pc1/pc3可以正常访问pc2/pc4/pc5/pc6;

三.实验思路

1.配置vlan

2.配置dhcp协议

四.实验步骤

//配置ip地址
[R1]int g 0/0/0
[R1-GigabitEthernet0/0/0]ip address 192.168.1.1 24
[R1-GigabitEthernet0/0/0]int g 0/0/0.1
[R1-GigabitEthernet0/0/0.1]ip address 192.168.2.1 24
[R1-GigabitEthernet0/0/0.1]dot1q termination vid 2
[R1-GigabitEthernet0/0/0.1]arp broadcast enable
//创建dhcp地址池
[R1]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[R1]ip pool aa
Info: It's successful to create an IP address pool.	
[R1-ip-pool-aa]network 192.168.1.0 mask 24
[R1-ip-pool-aa]gateway-list 192.168.1.1
[R1-ip-pool-aa]dns-list 8.8.8.8
[R1]ip pool bb
Info: It's successful to create an IP address pool.	
[R1-ip-pool-bb]network 192.168.2.0 mask 24
[R1-ip-pool-bb]gateway-list 192.168.2.1 
[R1-ip-pool-bb]dns-list 8.8.8.8

//sw1
[sw1]vlan batch 2 to 6
[sw1]int g0/0/1
[sw1-GigabitEthernet0/0/1]port link-type access
[sw1-GigabitEthernet0/0/1]port default vlan 2
[sw1]int g 0/0/2
[sw1-GigabitEthernet0/0/2]port link-type hybrid
[sw1-GigabitEthernet0/0/2]port hybrid untagged vlan 3 to 6
[sw1-GigabitEthernet0/0/2]port hybrid pvid vlan 3
[sw1]int g 0/0/3
[sw1-GigabitEthernet0/0/3]port link-type trunk
[sw1-GigabitEthernet0/0/3]port trunk allow-pass vlan 2 to 6
[sw1]int g 0/0/4
[sw1-GigabitEthernet0/0/4]p l h
[sw1-GigabitEthernet0/0/4]p h u v 3 4 5 6
[sw1-GigabitEthernet0/0/4]port hybrid tagged vlan 2
//sw2
[sw2]vlan batch 2 to 6
[sw2]int g 0/0/1   
[sw2-GigabitEthernet0/0/1]port link-type access
[sw2-GigabitEthernet0/0/1]port default vlan 2
[sw2]int g 0/0/2
[sw2-GigabitEthernet0/0/2]p l h
[sw2-GigabitEthernet0/0/2]port hybrid pvid vlan 4
[sw2-GigabitEthernet0/0/2]port hybrid untagged vlan 3 to 6
[sw2]int g 0/0/3
[sw2-GigabitEthernet0/0/3]p l t
[sw2-GigabitEthernet0/0/3]p t a v 2 t 6
[sw2]int g 0/0/4
[sw2-GigabitEthernet0/0/4]p l t
[sw2-GigabitEthernet0/0/4]p t a v 2 t 6
//sw3
[sw3]vlan batch 2 to 6
[sw3]int g 0/0/1
[sw3-GigabitEthernet0/0/1]p l h
[sw3-GigabitEthernet0/0/1]p h p v 5
[sw3-GigabitEthernet0/0/1]p h u v 3 4 5
[sw3]int g 0/0/2
[sw3-GigabitEthernet0/0/2]p l h
[sw3-GigabitEthernet0/0/2]p h p v 6
[sw3-GigabitEthernet0/0/2]p h u v 3 4 6
[sw3]int g 0/0/3
[sw3-GigabitEthernet0/0/3]p l t
[sw3-GigabitEthernet0/0/3]p t a v 
[sw3-GigabitEthernet0/0/3]p t a v 2 3 4 5 6