windows docker 部署 rocketmq

以下指令全程使用 windows 自带终端 Windows PowerShell 执行!!!
以下指令全程使用 windows 自带终端 Windows PowerShell 执行!!!
以下指令全程使用 windows 自带终端 Windows PowerShell 执行!!!

重要的事情说3遍!!!

确认电脑已安装 Docker Desktop
Windows PowerShell 里无法使用 $(pwd),所以这里用绝对路径,C:需要改成 /C/ 换行是 `
broker 配置文件在文章末尾

namesrv

docker run -d -v /C/Users/18559/Desktop/rocket/logs:/home/rocketmq/logs `
	--name rmqnamesrv `
	-e "JAVA_OPT_EXT=-Xms512M -Xmx512M -Xmn128m" `
	-p 9876:9876 `
	foxiswho/rocketmq:4.8.0 `
	sh mqnamesrv

broker

docker run -d  `
	-v /C/Users/18559/Desktop/rocket/logs:/home/rocketmq/logs `
	-v /C/Users/18559/Desktop/rocket/store:/home/rocketmq/store `
	-v /C/Users/18559/Desktop/rocket/conf:/home/rocketmq/conf `
	--name rmqbroker --link rmqnamesrv:rmqnamesrv  `
	-e "NAMESRV_ADDR=rmqnamesrv:9876" `
	-e "JAVA_OPT_EXT=-Xms512M -Xmx512M -Xmn128m" `
	-p 10911:10911 -p 10912:10912 -p 10909:10909 `
	foxiswho/rocketmq:4.8.0 `
	sh mqbroker -c /home/rocketmq/conf/broker.conf

console

docker run -d --name rmqconsole --link rmqnamesrv:rmqnamesrv `
	-e "JAVA_OPTS=-Drocketmq.namesrv.addr=rmqnamesrv:9876 -Dcom.rocketmq.sendMessageWithVIPChannel=false" `
	-p 8180:8080 -t styletang/rocketmq-console-ng:1.0.0

展示

快乐的标志

在这里插入图片描述

浏览器输入 127.0.0.1:8180

在这里插入图片描述

到这就ok了,结束战斗

broker 配置文件内容

# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS,
#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
#  limitations under the License.


#所属集群名字
brokerClusterName=DefaultCluster

#broker名字,注意此处不同的配置文件填写的不一样,如果在broker-a.properties使用:broker-a,
#在broker-b.properties使用:broker-b
brokerName=broker-a

#0 表示Master,>0 表示Slave
brokerId=0

#nameServer地址,分号分割
#namesrvAddr=rocketmq-nameserver1:9876;rocketmq-nameserver2:9876
namesrvAddr=rmqnamesrv:9876

#启动IP,如果 docker 报 com.alibaba.rocketmq.remoting.exception.RemotingConnectException: connect to <192.168.0.120:10909> failed
# 解决方式1 加上一句producer.setVipChannelEnabled(false);,解决方式2 brokerIP1 设置宿主机IP,不要使用docker 内部IP
#brokerIP1=192.168.0.253

#在发送消息时,自动创建服务器不存在的topic,默认创建的队列数
defaultTopicQueueNums=4

#是否允许 Broker 自动创建Topic,建议线下开启,线上关闭 !!!这里仔细看是false,false,false
#原因下篇博客见~ 哈哈哈哈
autoCreateTopicEnable=true

#是否允许 Broker 自动创建订阅组,建议线下开启,线上关闭
autoCreateSubscriptionGroup=true

#Broker 对外服务的监听端口
listenPort=10911

#删除文件时间点,默认凌晨4点
deleteWhen=04

#文件保留时间,默认48小时
fileReservedTime=120

#commitLog每个文件的大小默认1G
mapedFileSizeCommitLog=1073741824

#ConsumeQueue每个文件默认存30W条,根据业务情况调整
mapedFileSizeConsumeQueue=300000

#destroyMapedFileIntervalForcibly=120000
#redeleteHangedFileInterval=120000
#检测物理文件磁盘空间
diskMaxUsedSpaceRatio=88
#存储路径
#storePathRootDir=/home/ztztdata/rocketmq-all-4.1.0-incubating/store
#commitLog 存储路径
#storePathCommitLog=/home/ztztdata/rocketmq-all-4.1.0-incubating/store/commitlog
#消费队列存储
#storePathConsumeQueue=/home/ztztdata/rocketmq-all-4.1.0-incubating/store/consumequeue
#消息索引存储路径
#storePathIndex=/home/ztztdata/rocketmq-all-4.1.0-incubating/store/index
#checkpoint 文件存储路径
#storeCheckpoint=/home/ztztdata/rocketmq-all-4.1.0-incubating/store/checkpoint
#abort 文件存储路径
#abortFile=/home/ztztdata/rocketmq-all-4.1.0-incubating/store/abort
#限制的消息大小
maxMessageSize=65536

#flushCommitLogLeastPages=4
#flushConsumeQueueLeastPages=2
#flushCommitLogThoroughInterval=10000
#flushConsumeQueueThoroughInterval=60000

#Broker 的角色
#- ASYNC_MASTER 异步复制Master
#- SYNC_MASTER 同步双写Master
#- SLAVE
brokerRole=ASYNC_MASTER

#刷盘方式
#- ASYNC_FLUSH 异步刷盘
#- SYNC_FLUSH 同步刷盘
flushDiskType=ASYNC_FLUSH

#发消息线程池数量
#sendMessageThreadPoolNums=128
#拉消息线程池数量
#pullMessageThreadPoolNums=128

  • 2
    点赞
  • 2
    收藏
    觉得还不错? 一键收藏
  • 2
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论 2
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值