驱动案例三：platform按键驱动（一、设备）

plat_device.c

#include <linux/module.h>

#include <linux/types.h>

#include <linux/fs.h>

#include <linux/init.h>

#include <linux/platform_device.h>

#include <mach/regs-gpio.h>

#include <linux/interrupt.h>

#include <linux/device.h>

#include <linux/io.h>

 

static struct resource s3c_buttons_resource[] = {

 [0]={

  .start = S3C24XX_PA_GPIO,

  .end   = S3C24XX_PA_GPIO + S3C24XX_SZ_GPIO - 1,

  .flags = IORESOURCE_MEM,

 },

 [1]={

  .start = IRQ_EINT8,

  .end   = IRQ_EINT8,

  .flags = IORESOURCE_IRQ,

 },

 [2]={

  .start = IRQ_EINT11,

  .end   = IRQ_EINT11,

  .flags = IORESOURCE_IRQ,

 },

 [3]={

  .start = IRQ_EINT13,

  .end   = IRQ_EINT13,

  .flags = IORESOURCE_IRQ,

 },

 [4]={

  .start = IRQ_EINT14,

  .end   = IRQ_EINT14,

  .flags = IORESOURCE_IRQ,

 },

 [5]={

  .start = IRQ_EINT15,

  .end   = IRQ_EINT15,

  .flags = IORESOURCE_IRQ,

 },

 [6]={

  .start = IRQ_EINT19,

  .end   = IRQ_EINT19,

  .flags = IORESOURCE_IRQ,

 }

};

 

static struct platform_device *s3c_buttons;

static int __init platform_init(void)

{

    s3c_buttons = platform_device_alloc("mini2440buttons",-1);

    /*定义平台名为mini2440buttons，与驱动名相匹配*/

    platform_device_add_resources(s3c_buttons,&s3c_buttons_resource,7); /*为设备添加资源*/

    platform_device_add(s3c_buttons); /*注册平台设备s3c_buttons */

}

static void __exit platform_exit(void)

{

    platform_device_unregister(s3c_buttons);

}

module_init(platform_init);

module_exit(platform_exit);

 

MODULE_LICENSE("GPL");