单片机C8051F320 USB Low Speed/Full Speed 问题

 单片机C8051F320 USB Low Speed/Full Speed 问题

   我的目的是要单片机运行在USB 1.0 也就是USB2.0的低速状态,如果是选择全速,一切运行正常,如果选择低速,win7上就显示UnKnow device 错误代码10,如果在XP上运行,一切正常,经过我仔细查找发现关键就在这段代码,void Usb_Init(void) { POLL_WRITE_BYTE(POWER, 0x08); // Force Asynchronous USB Reset POLL_WRITE_BYTE(IN1IE, 0x07); // Enable Endpoint 0-2 in interrupts POLL_WRITE_BYTE(OUT1IE, 0x07); // Enable Endpoint 0-2 out interrupts POLL_WRITE_BYTE(CMIE, 0x07); // Enable Reset, Resume, and Suspend // interrupts #ifdef _USB_LOW_SPEED_ USB0XCN = 0xC0; // Enable transceiver; select low speed POLL_WRITE_BYTE(CLKREC, 0xA0); // Enable clock recovery; single-step // mode disabled; low speed mode enabled #else USB0XCN = 0xE0; // Enable transceiver; select full speed POLL_WRITE_BYTE(CLKREC, 0x80); // Enable cl