一、 单独修改service IP
1)主/备机节点停止HACMP服务
# smitty clstop
2)主/备机编辑/etc/hosts
192.168.50.88 nodesvc
3)# smitty hacmp->Initialization and Standard Configuration-> Configure Resources to Make Highly Available-> Configure Service IP Labels/Addresses->Change/Show a Service IP Label/Address
* IP Label/Address nodesvc
* New IP Label/Address [nodesvc] 这里再写一遍
* Network Name [net_ether_01]
4) # /usr/es/sbin/cluster/utilities/cllsif
nodesvc service net_ether_01 ether public node01 192.168.50.88
服务IP已经修改过来
5)# smitty hacmp-> Extended Configuration-> Verification and Synchronization
验证后启动HACMP即可
二、 单独修改主/备机boot1 IP
1)主/备机节点停止HACMP服务
# smitty clstop
2)主/备机修改en0 IP
# smitty chinet
3)主/备机编辑/etc/hosts
# vi /etc/hosts
192.168.100.61 node01boot1 140node01
192.168.100.62 node02boot1 140node02
192.168.50.88 nodesvc
5)# smitty hacmp->Extended Configuration-> Extended Topology Configuration->Configure HACMP Communication Interfaces/Devices->Change/Show Communication Interfaces/Devices
依次选择主/备机节点的en0/en0,不做修改,直接回车即可,自动会更新boot1 IP地址
6)# /usr/es/sbin/cluster/utilities/cllsif显示网络接口配置
node01boot1 boot net_ether_01 ether public node01 192.168.100.61 en0 255.255.255.0
nodesvc service net_ether_01 ether public node01 192.168.50.88 255.255.255.0
node02boot1 boot net_ether_01 ether public node02 192.168.100.62 en0 255.255.255.0
nodesvc service net_ether_01 ether public node02 192.168.50.88
boot1 IP已经修改过来
7)# smitty hacmp-> Extended Configuration-> Verification and Synchronization
验证后启动HACMP即可
三、 单独修改备机boot1对应接口enX
1)主/备机节点停止HACMP服务
# smitty clstop
2)备机修改boot1 IP 从en0->en1
# smitty chinet
en0 detach 删除IP
# smitty chinet
en1 up 设置IP
3)# smitty hacmp->Extended Configuration-> Extended Topology Configuration->Configure HACMP Communication Interfaces/Devices->Update HACMP Communication Interface with Operating System Settings
选择node02boot1 回车即可
此时# /usr/es/sbin/cluster/utilities/cllsif
node02boot1 boot net_ether_01 ether public node02 192.168.100.62
node02boot1不对应任何一个enX
4)# smitty hacmp-> Extended Configuration-> Verification and Synchronization
同步验证
# /usr/es/sbin/cluster/utilities/cllsif
node02boot1 boot net_ether_01 ether public node02 192.168.100.62 en1
同步验证后正确对应到en1
主/备机启动HACMP即可