u-boot 移植（一）准备工作

最新推荐文章于 2023-11-30 03:02:16 发布

乘风life

最新推荐文章于 2023-11-30 03:02:16 发布

阅读量391

点赞数

分类专栏：嵌入式文章标签： u-boot 移植 2012.04.01 JZ2440 编译

本文链接：https://blog.csdn.net/r21nn/article/details/73718402

版权

本文介绍了如何将U-Boot 2012.04.01移植到JZ2440开发板，包括在boards.cfg中添加配置选项，复制并修改board目录下的代码，创建新的配置文件，以及执行编译命令。目前完成的是移植前的准备工作，后续还需修改代码以适配开发板。

摘要由CSDN通过智能技术生成

将u-boot 2012.04.01移植到JZ2440开发板

拿到一个UBOOT，要知道怎样编译和修改可以看一看顶层目录下的README文件，其中有如下内容
Building the Software:
======================
U-Boot is intended to be simple to build. After installing the
sources you must configure U-Boot for one specific board type. This
is done by typing:

make NAME_config

where "NAME_config" is the name of one of the existing configu-
rations; see boards.cfg for supported names.

Finally, type "make all", and you should get some working U-Boot
images ready for download to / installation on your system:

If the system board that you have is not listed, then you will need
to port U-Boot to your hardware platform. To do this, follow these
steps:

1. Add a new configuration option for your bo