imx6ull rootfs启动后的报错记录1



U-Boot 2016.03-gee88051 (Nov 05 2021 - 17:59:09 +0800)

CPU:   Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz)
CPU:   Industrial temperature grade (-40C to 105C) at 48C
Reset cause: POR
Board: I.MX6U ALPHA|MINI
I2C:   ready
DRAM:  256 MiB
NAND:  512 MiB
MMC:   FSL_SDHC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   FEC1
Error: FEC1 address not set.

Normal Boot
Hit any key to stop autoboot:  0

NAND read: device 0 offset 0x620000, size 0x800000
 8388608 bytes read: OK

NAND read: device 0 offset 0x520000, size 0x20000
 131072 bytes read: OK
Kernel image @ 0x80800000 [ 0x000000 - 0x7fa370 ]
## Flattened Device Tree blob at 83000000
   Booting using the fdt blob at 0x83000000
   Using Device Tree in place at 83000000, end 8300bb93

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.10.109 (root@efe743e9e5b0) (OHOS (release) clang version 10.0.1.73276  (llvm-project 434bcd0f84635e92ea9da9bf7748a6cf24a8e627), GNU ld (GNU Binutils for Ubuntu) 2.30) #1 SMP PREEMPT Fri Oct 21 00:35:55 UTC 2022
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Freescale i.MX6 ULL 14x14 EVK Board
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Reserved memory: created CMA memory pool at 0x86000000, size 160 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000080000000-0x000000008fffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x000000008fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000008fffffff]
[    0.000000] percpu: Embedded 15 pages/cpu s32588 r8192 d20660 u61440
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64960
[    0.000000] Kernel command line: console=ttymxc0,115200 ubi.mtd=5 root=ubi0:rootfs rootfstype=ubifs mtdparts=gpmi-nand:4m(u-boot),128k(env),1m(logo),1m(dtb),8m(kernel),-(rootfs)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 76148K/262144K available (12288K kernel code, 1244K rwdata, 3400K rodata, 1024K init, 462K bss, 22156K reserved, 163840K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000]  Trampoline variant of Tasks RC
  • 0
    点赞
  • 1
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
启动正点原子imx6ull设备,你需要按照以下步骤进行操作: 1. 将正点原子的镜像解压到Ubuntu虚拟机中。 2. 进入设备树文件所在目录。使用命令`cd arch/arm/boot/dts`进入该目录。 3. 修改设备树文件(imx6ull-alientek-emmc.dts),可以使用`code imx6ull-alientek-emmc.dts`命令打开该文件进行编辑。 4. 在设备树文件中进行必要的修改,以防止LED灯占用。具体的修改内容需要根据你的需求和设备的具体情况来确定。 5. 编译内核和设备树。根据你提供的信息,你可能需要使用NXP提供的U-boot和Linux版本进行编译。确保你已经安装了相应的编译工具链和依赖库。 6. 根据你的开发板型号和版本,选择正确的启动方式。具体的启动步骤可能因为不同的开发板而有所不同,你可以参考正点原子提供的文档或者官方指南来进行操作。 7. 遵循正确的启动顺序,按照正点原子提供的说明进行启动。 需要注意的是,以上步骤仅供参考,具体操作可能因为你的环境和需求而有所不同。请仔细阅读相关文档和官方指南,并根据实际情况进行操作。<span class="em">1</span><span class="em">2</span><span class="em">3</span> #### 引用[.reference_title] - *1* *2* [正点原子 imx6ull linux 更新内核与设备树 通过nfs挂载](https://blog.csdn.net/hk2121/article/details/129665151)[target="_blank" data-report-click={"spm":"1018.2226.3001.9630","extra":{"utm_source":"vip_chatgpt_common_search_pc_result","utm_medium":"distribute.pc_search_result.none-task-cask-2~all~insert_cask~default-1-null.142^v93^chatsearchT3_2"}}] [.reference_item style="max-width: 50%"] - *3* [正点原子IMX6ULL开发板-liunx内核移植例程-uboot卡在Starting kernel...问题](https://blog.csdn.net/Qiuhongim/article/details/129287967)[target="_blank" data-report-click={"spm":"1018.2226.3001.9630","extra":{"utm_source":"vip_chatgpt_common_search_pc_result","utm_medium":"distribute.pc_search_result.none-task-cask-2~all~insert_cask~default-1-null.142^v93^chatsearchT3_2"}}] [.reference_item style="max-width: 50%"] [ .reference_list ]

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值