首先,需要澄清的是,Cisco 2611系列路由器,并不在Cisco官方指定的支持CME(CallManager Express)的路由器型号之中。不过,2600XM系列路由器是正式支持CME功能的。
但是,我发现,如果你选择了正确的IOS版本,Cisco 2611路由器完全可以实现CME的大多数功能。
我目前选用的版本,是Cisco 2600系列最新的12.3系列IOS。具体为:
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(26), RELEASE SOFTWARE (fc2)
当然,如果是带有Voice功能的12.3版本IOS,应该也会支持(未经考证)。
虽然是功能较3725这样包含V3.1版本CME的路由器少了一些,但是基本的功能都是可以实现的,最多可以支持48个IP电话。(想一想啊,C2611最高配置只有40MHz的CPU,16M的Flash和64M的RAM,但是它可以完成非常多的任务。)
好了,耳听为虚,眼见为凭,截取一些输出:
R1#show ephone
ephone-1 Mac:0008.218C.09CE TCP socket:[1] activeLine:0 REGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0
IP:192.168.1.2 51264 Telecaster 7960 keepalive 221 max_line 6
button 1: dn 1 number 1001 IDLE
ephone-2 Mac:0009.B7DA.0277 TCP socket:[2] activeLine:0 REGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0
IP:192.168.1.3 51377 Telecaster 7960 keepalive 221 max_line 6
button 1: dn 2 number 1002 IDLE
R1#show telephony-service
CONFIG ###注释:3725之类的,这里会显示CME的版本,2611这里永远都不会有。
======
ip source-address 192.168.1.11 port 2000
max-ephones 20
max-dn 20 ###这只是设定值,最大值往下看。
max-conferences 4
network-locale CA
time-format 12
date-format mm-dd-yy
keepalive 30
interdigit timeout 10
busy timeout 10
web admin system name Admin
web admin customer name Customer
edit DN through Web: disabled.
edit TIME through web: disabled.
R1(config-telephony)#max-ephones ?
<1-48> Maximum phones to support
R1(config-telephony)#max-dn ?
<1-192> Maximum directory numbers supported
R1(config-telephony)#max-conferences ?
<1-8> Maximum conferences to support
显然,没有auto assign这个命令。
R1(config-telephony)#?
Cisco IOS Telephony Service configuration commands:
application The selected application
call-forward Define E.164 telephone number for call forwarding
create create cnf for ethernet phone
date-format Set date format for IP Phone display
default Set a command to its defaults
dialplan-pattern Define E.164 telephone number prefix
directory Define directory naming order
dn-webedit enable Edit DN through Web
exit Exit from telephony-service configuration mode
ip Define IP address and port for Telephony-Service/Fallback
keepalive Define keepalive timeout period to unregister IP phones
load Select the IP phone firmware load file
max-conferences Define max number of 3 party G.711 conferences
max-dn Maximum directory numbers supported
max-ephones Define max number of IP phones
moh Define music-on-hold filename
mwi Define IP address and port for MWI Server
network-locale Define ephone network locale
no Negate a command or set its defaults
reset reset ethernet phone
restart restart ethernet phone
service Service configuration in ITS
time-format Set time format for IP Phone display
time-webedit enable Edit Time through Web
timeouts Define timeout value for IP phone
transfer-pattern Define valid call transfer destinations
transfer-system Define call transfer system: blind/consult and
local/end-to-end
url Define Ephone URL's
user-locale Define ephone user locale
voicemail Set the voicemail access number called when the MESSAGES IP
phone button is pressed
web define username for admin user
没有Label命令。
R1(config-ephone-dn)#?
Ephone DN configuration commands:
application The selected application
call-forward Define E.164 telephone number for call forwarding
caller-id Configure port caller id parameters
cor Class of Restriction on dial-peer for this dn
default Set a command to its defaults
description dn desc, for DN Qualified Display Name
exit Exit from ephone-dn configuration mode
feed set live feed multicast stream mode
hold-alert Set Call On-Hold timeout alert parameters
huntstop Stop hunting on Dial-Peers
intercom Define intercom/auto-call extension number
loopback-dn Define dn-tag to create loopback dn pair with this ephone-dn
moh set live-feed music-on-hold mode (with optional multicast)
mwi set message waiting indicator options (mwi)
name Define dn user name
no Negate a command or set its defaults
number Define E.164 telephone number
paging set audio paging mode
preference Preference for the attached dial-peer for the primary dn
number
transfer-mode Define call transfer mode: blind vs. consult
translate Translation rule
电话摘机后的线路状态。
R1#show ephone-dn summary
PORT DN STATE MWI_STATE CODEC VAD VTSP STATE VPM STATE
======== ========== ============ ======== === ===================== =========
50/0/1 SIEZE NONE None y S_DIGIT_COLLECT EFXS_OFFHOOK
50/0/2 IDLE NONE - - - EFXS_ONHOOK