交换机提示 %PLATFORM_PBR-4-SDM_MISMATCH

在配置思科低端三层交换机时，如果应用了策略路由，交换机可能会提示如下信息：（常见于3560/3750等平台）

%PLATFORM_PBR-4-SDM_MISMATCH: PBR requires sdm template routing

这是因为SDM（Switch Database Management）模板选择不对所致。

输入命令 sh sdm prefer 查看SDM信息（注意默认模板为desktop default，还有 IPv4 policy based routing aces）

 The current template is "desktop default" template.
 The selected template optimizes the resources in
 the switch to support this level of features for
 8 routed interfaces and 1024 VLANs.

  number of unicast mac addresses:                  6K
  number of IPv4 IGMP groups + multicast routes:    1K
  number of IPv4 unicast routes:                    8K
    number of directly-connected IPv4 hosts:        6K
    number of indirect IPv4 routes:                 2K
  number of IPv4 policy based routing aces:         0
  number of IPv4/MAC qos aces:                      0.5K
  number of IPv4/MAC security aces:                 1K

在配置模式下，输入 sdm prefer routing ，重启后即可解决。

重启后查看 sh sdm prefer，模板已变成desktop routing。

 The current template is "desktop routing" template.
 The selected template optimizes the resources in
 the switch to support this level of features for
 8 routed interfaces and 1024 VLANs.

  number of unicast mac addresses:                  3K
  number of IPv4 IGMP groups + multicast routes:    1K
  number of IPv4 unicast routes:                    11K
    number of directly-connected IPv4 hosts:        3K
    number of indirect IPv4 routes:                 8K
  number of IPv4 policy based routing aces:         0.5K
  number of IPv4/MAC qos aces:                      0.5K
  number of IPv4/MAC security aces:                 1K