如果您已经为 ECS 实例配了数据盘,您需要先格式化数据盘并挂载文件系统后才能正常使用数据盘。
磁盘分区和格式化是高风险行为,请慎重操作。本文档描述如何处理一个新买的数据盘,如果您的数据盘上有数据,请务必对数据盘创建快照以避免可能的数据丢失。
云服务器 ECS 仅支持对 数据盘 进行分区,而不支持对 系统盘 进行分区。如果您强行使用第三方工具对系统盘进行分区操作,可能引发未知风险,如系统崩溃、数据丢失等。
本文描述如何用一个新的数据盘创建一个单分区数据盘并挂载文件系统。
您还可以根据业务需要,对数据盘进行多分区配置。建议使用系统自带的工具进行分区操作。
您需要知道挂载到实例的数据盘的设备名:您可以通过 ECS 管理控制台 > 磁盘详情 > 磁盘挂载信息 查到数据盘的 设备名。数据盘的设备名由系统默认分配,从 /dev/xvdb 开始往后顺序排列,分布范围包括 /dev/xvdb?/dev/xvdz。
在本示例中,我们用一个新的 20 GB 数据盘(设备名为 /dev/xvdb)创建一个单分区数据盘并挂载一个 ext3 文件系统。使用的实例是 I/O 优化实例,操作系统为 CentOS 6.8。
运行 fdisk -l 命令查看实例是否有数据盘。如果执行命令后,没有发现 /dev/vdb,表示您的实例没有数据盘,无需格式化数据盘,请忽略本文后续内容。
如果您的数据盘显示的是 dev/xvd?,表示您使用的是非 I/O 优化实例。
输入 p 并按回车键:选择主分区。因为创建的是一个单分区数据盘,所以只需要创建主分区。
如果要创建 4 个以上的分区,您应该创建至少一个扩展分区,即选择 e。
输入分区编号并按回车键。因为这里仅创建一个分区,可以输入 1。
输入最后一个扇区编号:因为这里仅创建一个分区,所以按回车键采用默认值。
[root@iXXXXXXX ~]# fdisk /dev/vdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x5f46a8a2.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won‘t be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: DOS-compatible mode is deprecated. It‘s strongly recommended to
switch off the mode (command ‘c‘) and change display units to
First cylinder (1-41610, default 1): 1
Last cylinder, +cylinders or +size{K,M,G} (1-41610, default 41610):
The partition table has been altered!
Calling ioctl() to re-read partition table.
查看新的分区:运行命令 fdisk -l。如果出现以下信息,说明已经成功创建了新分区 /dev/vdb1。
Disk /dev/vda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Device Boot Start End Blocks Id System
/dev/vda1 * 1 5222 41942016 83 Linux
Disk /dev/vdb: 21.5 GB, 21474836480 bytes
16 heads, 63 sectors/track, 41610 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Device Boot Start End Blocks Id System
/dev/vdb1 1 41610 20971408+ 83 Linux
在新分区上创建一个文件系统:运行命令 mkfs.ext3 /dev/vdb1。
本示例要创建一个 ext3 文件系统。您也可以根据自己的需要,选择创建其他文件系统,例如,如果需要在 Linux、Windows 和 Mac 系统之间共享文件,您可以使用 mkfs.vfat 创建 VFAT 文件系统。
[root@iXXXXXXX ~]# mkfs.ext3 /dev/vdb1
Stride=0 blocks, Stripe width=0 blocks
1310720 inodes, 5242852 blocks
262142 blocks (5.00%) reserved for the super user
Maximum filesystem blocks=4294967296
32768 blocks per group, 32768 fragments per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 37 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
(建议)备份 etc/fstab:运行命令 cp /etc/fstab /etc/fstab.bak。
向 /etc/fstab 写入新分区信息:运行命令 echo /dev/vdb1 /mnt ext3 defaults 0 0 >> /etc/fstab。
注意:Ubuntu 12.04 不支持 barrier,所以对该系统正确的命令是:echo ‘/dev/vdb1 /mnt ext3 barrier=0 0 0‘ >> /etc/fstab。
如果需要把数据盘单独挂载到某个文件夹,比如单独用来存放网页,请将以上命令 /mnt 替换成所需的挂载点路径。
查看 /etc/fstab 中的新分区信息:运行命令 cat /etc/fstab。
[root@iXXXXXXX ~]# cat /etc/fstab
# Created by anaconda on Thu Feb 23 07:28:22 2017
# Accessible filesystems, by reference, are maintained under ‘/dev/disk‘
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
UUID=3d083579-f5d9-4df5-9347-8d27925805d4 / ext4 defaults 1 1
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
/dev/vdb1 /mnt ext3 defaults 0 0
挂载文件系统:运行命令 mount /dev/vdb1 /mnt。
查看目前磁盘空间和使用情况:运行命令 df -h。如果出现新建文件系统的信息,说明挂载成功,可以使用新的文件系统了。
[root@iXXXXXXX ~]# mount /dev/vdb1 /mnt
Filesystem Size Used Avail Use% Mounted on
/dev/vdb1 20G 173M 19G 1% /mnt