nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) 错误

最新推荐文章于 2024-08-02 11:28:26 发布
最新推荐文章于 2024-08-02 11:28:26 发布
阅读量444 收藏
点赞数
本文为博主CSDN Rosefun96原创文章，转载请注明。
本文链接：https://blog.csdn.net/rosefun96/article/details/109306396
版权

（1）查看80端口是不是被占用了

$ netstat -anp |grep 80

tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      2679/nginx: master  
tcp        0      0 144.34.160.104:58030    142.250.72.227:443      TIME_WAIT   -                   
tcp        0      0 144.34.160.104:58832    119.29.29.29:80         TIME_WAIT   -

直接把进程 2679 kill 掉：

kill 2679

(2) 重新启动 Nginx：

nginx

参考：

  1. Nginx
rosefunR
关注
专栏目录
解决nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)以及nginx 502 Bad Gateway解决方法
念兮为美
04-28 5275
解决nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)，以及nginx 502 Bad Gateway解决方法
nginx: [emerg] bind() to 0.0.0.0:8080 failed (48: Address already in use)
梁雨季™的博客
12-28 1944
liangyuji@liangyujideMacBook-Pro nginx % nginx nginx: [emerg] bind() to 0.0.0.0:8080 failed (48: Address already in use) nginx: [emerg] bind() to 0.0.0.0:8080 failed (48: Address already in use) nginx: [emerg] bind() to 0.0.0.0:8080 failed (48: Address alr
Nginx 学习笔记（七）如何解决nginx: [emerg] bind() to [::]:80 failed (98: Address already in use)...
Tinywan
12-27 5236
出现：nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) 错误，有以下两种情况 1、80端口被占用 2、ipv4端口和ipv6端口冲突的问题 今天服务器安装了NodeJs,服务器实在卡的不行，就重启了，结果重启后，Nginx没有自动重启。果断的手动重启，结果问题来了 在ubuntu16.04上面尝试启动...
Ngin启动nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)
最新发布
lemon310的博客
08-02 335
这表明80端口已被其他的进程所绑定，无法将80端口绑定到nginx上，原因是linux系统中显存一个nginx服务，需要关闭后再重启。
解决nginx: [emerg] bind() to [::]:80 failed (98: Address already in use)
qq_14989227的博客
10-16 948
今天在ubuntu10.04上面安装nginx，安装完成之后尝试启动nginx，使用命令： sudo /etc/init.d/nginx start 结果提示错误： hankcs@ubuntu:~$ sudo /etc/init.d/nginx start[sudo] password for hankcs: * Starting nginx nginx
「Nginx」- nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) @20210409
k4nz
04-09 2693
问题描述 在启动 Nginx 服务时，产生如下错误： nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [eme.
nginx启动服务提示98: Address already in use错误的解决
09-30
尝试启动服务时，系统报错“nginx: [emerg] bind() to *.*.*.*:80 failed (98: Address already in use)”，提示无法绑定到地址和端口。 接下来，通过使用`lsof -i:80`命令来查看占用80端口的进程，发现是nginx进程...
[root@yfs01 nginx]# ./sbin/nginx -e stop nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:10000 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:10000 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:10000 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:10000 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:10000 failed (98: Address already in use) nginx: [emerg] still could not bind()
06-07
这个错误提示表明 Nginx 无法停止，因为在停止之前出现了绑定端口的错误。具体来说，Nginx 无法绑定到 0.0.0.0:80 和 0.0.0.0:10000 这两个端口，因为这些端口已经被其他进程占用了。 解决这个问题的方法是找到占用...
nginx: [emerg] bind() to [::]:80 failed (98: Address already in use)解决方案
洛洛devil的专栏
09-07 3238
在安装nginx的时候，启动nginx，即如果发现： [root@master nginx]# /usr/local/nginx/sbin/nginx nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: A
nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)
绯浅yousa的笔记
07-12 4449
nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)报错信息nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] socket() [::]:80 failed (97: Address fa
【已解决】Nginx启动[emerg] bind() to 0.0.0.0:80 failed(98:Address alreadyin use)
weixin_52890053的博客
03-15 8015
最近，在Linux系统上Nginx服务时候，报80 端口已经被其他进程占用，导致 Nginx 无法绑定到该端口上。杀死进程这些解决方法均无用，只有停止之前的nginx服务。重启启动才能解决问题！
Nginx [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use)
热门推荐
roy8666的博客
04-29 1万+
有时候我们开启或重启Nginx时会报如下错误： **Nginx [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use)** 原因是端口号80被其它程序或文件占用了，那么就干掉这个程序吧 sudo fuser -k 80/tcp fuser -k 80/tcp 然后开启或重启Nginx即可。 ...
[emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use)错误原因
乐杨俊浅谈LAMP
08-31 1万+
[emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use)错误原因
启动或重启Nginx时nginx: [emerg] bind() to [::]:80 failed (98: Address already in use)
Jecretariat的博客
08-07 189
这是因为80端口被占用了，以下命令即可解决： sudo fuser -k 80/tcp
nginx: [emerg] bind() to [::]:80 failed (98: Address already in use)
Christine95的博客
10-18 1129
问题描述nginx: [emerg] bind() to [::]:80 failed (98: Address already in use)问题原因 使用 netstat -ntpl 查看端口占用情况 发现80端口是httpd 也就是被apache 占用了。所以要关掉该进程。 解决方案 service httpd stop 关闭apache 服务 service nginx start 开启ng
nginx: [emerg] bind() to 0.0.0.0:80 failed (98: address already in use)
04-30
在启动nginx时，如果出现nginx: [emerg] bind() to 0.0.0.0:80 failed (98: address already in use)的错误提示，通常表示80端口已经被占用了，无法绑定到新的进程上。这时需要寻找占用该端口的进程并杀死它，或者将...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

rosefunR

你的赞赏是我创作的动力！

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付：¥1
获取中
扫码支付

您的余额不足，请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值