高通apq8096连接外网_qcom:802.11n-CSDN博客

本文链接：https://blog.csdn.net/ruidongren/article/details/78422656

  //验证 

  /etc/initscripts # iwconfig 

  sit0 no wireless extensions. 

  lo no wireless extensions. 

  dummy0 no wireless extensions. 

  wlan0 Qcom:802.11n ESSID:"F-TEST1" Nickname:"" 

  Mode:Managed Frequency:5.18 GHz Access Point: CC:81:DA:29:89:80 

  Bit Rate=360 Mb/s Tx-Power=13 dBm 

  RTS thr=1048576 B Fragment thr=8000 B 

  Encryption key:AF40-A1A2-1A24-8149-1D27-4D8A-7B12-883C-2779-B808-6EB7-13E9-96D5-D87A-269F-482E [2] Security 

  p2p0 Qcom:802.11n ESSID:off/any Nickname:"" 

  Mode:Managed Channel:0 Access Point: Not-Associated 

  Bit Rate:0 kb/s Tx-Power=0 dBm 

  RTS thr=1048576 B Fragment thr=8000 B 

  Encryption key:off 

  bond0 no wireless extensions. 

  /etc/initscripts # ping www.baidu.com 

  PING www.a.shifen.com (183.232.231.173) 56(84) bytes of data. 

  64 bytes from 183.232.231.173: icmp_req=1 ttl=54 time=10.3 ms 

  64 bytes from 183.232.231.173: icmp_req=2 ttl=54 time=7.90 ms 

  64 bytes from 183.232.231.173: icmp_req=3 ttl=54 time=10.3 ms 

  64 bytes from 183.232.231.173: icmp_req=4 ttl=54 time=8.66 ms 

  64 bytes from 183.232.231.173: icmp_req=5 ttl=54 time=10.4 ms 

  //修改 

  /etc/initscripts/wlan文件 

  中修改为 mode="start_sta" 

  修改/data/misc/wifi/wpa_supplicant.conf文件中需要连接的wifi essid以及key 

  network={ 

  #Open 

  # ssid="example open network" 

  # key_mgmt=NONE 

  #WPA-PSK 

  ssid="F-TEST1" 

  proto=WPA2 

  key_mgmt=WPA-PSK 

  pairwise=TKIP CCMP 

  group=TKIP CCMP 

  psk="12345678" 

  重启wlan /etc/initscripts/wlan restart 