华为snmp模板

配置设备侧SNMP参数。
system-view
[SwitchA] snmp-agent //启动SNMP Agent服务
[SwitchA] snmp-agent sys-info version v2c //设置SNMP协议的版本为v2c
[SwitchA] snmp-agent mib-view included View_ALL iso //创建MIB视图参数View_ALL
[SwitchA] snmp-agent community read cipher Public123 mib-view View_ALL //设置读团体名及MIB视图权限
[SwitchA] snmp-agent community write cipher Private123 mib-view View_ALL //设置写团体名及MIB视图权限
[SwitchA] snmp-agent trap source MEth0/0/1 //此处应该配置的是网管添加该设备的接口
[SwitchA] snmp-agent trap enable //使能Trap上传告警功能
[SwitchA] snmp-agent target-host trap address udp-domain 192.168.10.10 params securityname Public123 v2c //192.168.10.10为eSight的IP地址, securityname与读团体字一致。

对于不同型号和版本的网络设备，配置命令会略有不同。以下以华为AR设备为例。

system-view
[AR1] snmp-agent \开启SNMP Agent服务
[AR1] snmp-agent sys-info version v3
[AR1] snmp-agent mib-view View_ALL include iso \设置MIB视图参数View_ALL
[AR1] snmp-agent group v3 SNMPv3group privacy read-view View_ALL write-view View_ALL notify-view View_ALL \设置用户组
[AR1] snmp-agent usm-user v3 SNMPv3user SNMPv3group authentication-mode sha Changeme_123 privacy-mode aes128 Changeme@123 \设置用户
[AR1] snmp-agent target-host trap-paramsname SNMPv3ser v3 securityname SNMPv3user privacy \设置告警参数
[AR1] snmp-agent target-host trap-hostname eSightServer address 192.168.3.100 trap-paramsname SNMPv3user \设置告警主机
[AR1] snmp-agent trap enable \开启trap告警