ubuntu/fedora＋hw em660的连接对调日志

华为EM660 3G模块:CDMA 1x/EVDO模块，EM660与PC linux之间通过USB转换卡（好像某些专业人士叫 USB Dongle，本人比较土，不是很确认）连接。

 

EM660及其usb转换卡上并无声卡及MIC插孔，故只能测试拨号的ATCommand，不能真正从EM660听到或采集声音。

 

 

 dmesg
......
[ 6296.331428] USB Mass Storage support registered.
[ 6296.341005] usbserial: USB Serial support registered for GSM modem (1-port)
[ 6296.342582] option 2-1:1.0: GSM modem (1-port) converter detected
[ 6296.344074] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 6296.346149] option 2-1:1.1: GSM modem (1-port) converter detected
[ 6296.347360] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 6296.349502] option 2-1:1.2: GSM modem (1-port) converter detected
[ 6296.350725] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
[ 6296.351945] usbcore: registered new interface driver option
[ 6296.351953] option: USB Driver for GSM modems: v0.7.2
......

有三个串口，ttyUSB2用于电话，ttyUSB0用于无线数据连接，前者用minicom连接，直接输入ATCommand调试，后者，使用pppd 直接连接。

 

 minicom -s
            +-----[configuration]------+
            | Filenames and paths      |
            | File transfer protocols  |
            | Serial port setup        |
            | Modem and dialing        |
            | Screen and keyboard      |
            | Save setup as dfl        |
            | Save setup as..          |
            | Exit                     |
            | Exit from Minicom        |
            +--------------------------+

    +-----------------------------------------------------------------------+
    | A -    Serial Device      : /dev/ttyUSB2                              |
    | B - Lockfile Location     : /var/lock                                 |
    | C -   Callin Program      :                                           |
    | D -  Callout Program      :                                           |
    | E -    Bps/Par/Bits       : 115200 8N1                                |
    | F - Hardware Flow Control : No                                        |
    | G - Software Flow Control : No                                        |
    |                                                                       |
    |    Change which setting?                                              |
    +-----------------------------------------------------------------------+

配置完成后使用minicom连接上ttyUSB2，启动ppp连接。

modprobe ppp_generic



lsmod | grep ppp
ppp_deflate            12800  0
zlib_deflate           28312  1 ppp_deflate
ppp_async              17024  0
ppp_generic            32668  3 ppp_deflate,bsd_comp,ppp_async
slhc                   14208  1 ppp_generic
crc_ccitt              10112  2 ppp_async,irda


另一个窗口打开运行：

root@shallon-laptop:/etc/ppp/peers# pppd connect 'chat -v "" "AT" "" "ATDT#777 CONNECT"' user CARD password CARD /dev/ttyUSB0 115200 nodetach crtscts debug usepeerdns defaultroute
Serial connection established.
using channel 5
Using interface ppp0
Connect: ppp0 <--> /dev/ttyUSB0
rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MD5> <magic 0x234dc7ad>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x5ffb5a8f> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MD5> <magic 0x234dc7ad>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x5ffb5a8f> <pcomp> <accomp>]
sent [LCP EchoReq id=0x0 magic=0x5ffb5a8f]
rcvd [CHAP Challenge id=0x1 <d684a691277263ebab3ee21c15a75715>, name = "GD-GZ-DGZ-PD-74.CDMA"]
sent [CHAP Response id=0x1 <616c3ad66bc645c3875c308716620e3d>, name = "CARD"]
rcvd [LCP EchoRep id=0x0 magic=0x234dc7ad]
rcvd [CHAP Success id=0x1 ""]
CHAP authentication succeeded
CHAP authentication succeeded
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfReq id=0x1 <addr 115.168.82.142>]
sent [IPCP ConfAck id=0x1 <addr 115.168.82.142>]
rcvd [LCP ProtRej id=0x2 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfNak id=0x2 <addr 113.113.52.57> <ms-dns1 202.96.128.86> <ms-dns3 220.192.32.103>]
sent [IPCP ConfReq id=0x3 <addr 113.113.52.57> <ms-dns1 202.96.128.86> <ms-dns3 220.192.32.103>]
rcvd [IPCP ConfAck id=0x3 <addr 113.113.52.57> <ms-dns1 202.96.128.86> <ms-dns3 220.192.32.103>]
Cannot determine ethernet address for proxy ARP
local  IP address 113.113.52.57
remote IP address 115.168.82.142
primary   DNS address 202.96.128.86
secondary DNS address 220.192.32.103
Script /etc/ppp/ip-up started (pid 15898)
Script /etc/ppp/ip-up finished (pid 15898), status = 0x0

拨入CDMA电话，PPP连接被断掉。

Modem hangup
Connect time 1.1 minutes.
Sent 0 bytes, received 256 bytes.
Script /etc/ppp/ip-down started (pid 15961)
Connection terminated.
Script /etc/ppp/ip-down finished (pid 15961), status = 0x0

 

下面是这个过程中的电话连接窗口日志：

 

Welcome to minicom 2.3

OPTIONS: I18n
Compiled on Aug 29 2008, 07:16:49.
Port /dev/ttyUSB2

                 Press CTRL-A Z for help on special keys
                                                    
AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0                    
OK                                                  
                                                    
^RSSILVL: 40

^RSSILVL: 20

RING

+CLIP:02032239423,0,,,,0 

RING

^CEND:2,0,255

 

 

当初测试的时候，不知道PPPD是不应该退出的，正常的情形是PPP连接中无数据输入输出，直到电话打完为止，没想到无意中记录了一种出错的情况，但是居然现在无法在LINUX重现了，只在在windows下重现，问题正在解决。特此记录。

另外用这种方法启动的PPPD，用ifconfig能够看到成功建立了PPP0，用route也能看到相关的路有表，而DNS则需要手动配置。方法是将/etc/ppp/resolv.conf的内容（其实就是pppd的usepeerdns中获取的dns列表）复制到/etc/resolv.conf。特此记录。