mpiCC与mpicc命令详解

mpiCC

Compiles and links MPI programs written in C++//编译链接MPI C++源程序

Description

This command can be used to compile and link MPI programs written in C++. It provides the options and any special libraries that are needed to compile and link MPI programs.//它提供了选项和有用的库来编译链接MPI程序

It is important to use this command (or a Makefile processed with mpireconfig) particularly when linking programs, as it provides the necessary libraries. It can also simplify the use of the MPE profiling libraries, through the use of the -mpilog, -mpitrace, and -mpianim commands.

mpiCC cannot be used to compile C programs. Use mpicc for C programs.

Command line arguments

	-mpilog	Build version that generate MPE log files
	-mpitrace	Build version that generates traces
	-mpianim	Build version that generates real-time animation
	-show	Show the commands that would be used without runnning them
	-help	Give short help
	-echo	Show exactly what this program is doing. This option should normally not be used.
	others	are passed to the compiler or linker. For example, -c causes files to be compiled, -g selects compilation with debugging on most systems, and -o name causes linking with the output executable given the name name.

Environment Variables

The environment variables  MPICH_CCC and  MPICH_CCLINKER may be used to select different C++ compiler and linker. Note that since MPICH is built with a particular C++ and C compiler, change the compilers used can cause problems. Use this only if you could intermix code compiled with the different compilers.

Examples

To compile a single file  foo.c, use

   mpicc -c foo.c 

To link the output and make an executable, use

   mpicc -o foo foo.o

Combining compilation and linking in a single command

   mpicc -o foo foo.c

is a convenient way to build simple programs.

See Also

mpif77, mpireconfig 

Location:/home/MPI/mansrc/commands

mpicc

---

mpicc(1)                           LAM TOOLS                          mpicc(1)

NAME

       mpicc, mpiCC / mpic++ - Compile LAM/MPI C/C++ programs.

SYNTAX

       mpicc [-showme|-showme:compile|-showme:link] ...

       mpiCC [-showme|-showme:compile|-showme:link] ...

       mpic++ [-showme|-showme:compile|-showme:link] ...

OPTIONS

       -showme

Does not invoke the underlying C/C++ compiler.Instead,it shows the command line that would be  executed  to  compile  the C/C++ program.

       -showme:compile 

Does  not  invoke  the  underlying  C/C++ compiler.  Instead, it shows the compiler flags that would be  supplied  to  the  C/C++ compiler.

       -showme:link 

Does  not  invoke  the  underlying  C/C++ compiler.  Instead, it shows the linker flags that would be supplied to the C/C++  compiler.

       See  cc(1)  and CC(1) (or whatever your underlying C/C++ compilers are)for all other options.

DESCRIPTION

       mpicc and mpiCC (mpic++ is a synonym for mpiCC provided  for  filenames that  do not support case-sensitive filenames) are convenience wrappers for the local native C and C++ compilers.Translation of a LAM program requires the linkage of the LAM specific libraries which may not reside in one of the standard search directories  of  ld(1). It also often requires the inclusion of header files what may also not be found in a standard location.  mpicc passes its arguments to the  local  native  C compiler along with the -I, -L and -l options required by LAM programs.
       This includes all necessary options for ROMIO and/or C++ bindings  support (if ROMIO/C++ support was included when LAM was compiled).
       mpiCC  (and  therefore  mpic++)  is similar, but invokes the native C++
       compiler instead.

       The LAM Team strongly encourages  using  mpicc  and  mpiCC  instead  of
       attempting to link to the LAM libraries manually.  This allows the spe-
       cific implementation of LAM to change without forcing changes to linker
       directives  in  users’  Makefiles  (the  specific set of underlying LAM
       libraries has already changed multiple times, and  will  likely  change
       again in future versions).

       Indeed,  since mpicc/mpiCC are very thin wrappers on top of an underly-
       ing compiler, there are very, very few compelling reasons  not  to  use
       mpicc/mpiCC.    When  it  is  not  possible  to  use  mpicc/mpiCC,  the
       -showme:compile and -showme:link arguments should be used instead.  For
       example:

       shell$ cc -c file1.c ‘mpicc -showme:compile‘

       shell$ cc -c file2.c ‘mpicc -showme:compile‘

       shell$ cc file1.o file2.o ‘mpicc -showme:link‘ -o my_mpi_program

ENVIRONMENT VARIABLES

       By  default,  mpicc  uses the C compiler that was selected when LAM was
       configured (with the --with-cc flag to ./configure, or by  setting  the
       environment  variable  CC  before ./configure was invoked) as the local
       native C compiler, but this can be overridden by the LAMMPICC  environ-
       ment variable (an older name for this environment variable is LAMHCC --
       this also still works, but its use is deprecated).

       Likewise, mpiCC uses the C++ compiler that was selected  when  LAM  was
       configured  (with the --with-cpp flag to ./configure, or by setting the
       environment variable CXX before invoking ./configure) by  default,  but
       this  can be overridden by the LAMMPICXX environment variable (an older
       name for this environment variable is LAMHCP -- this also still  works,
       but its use is deprecated).

       If  the  environment  variable LAMHOME is set, mpicc and mpiCC will use
       its value as the location of the LAM installation directory instead  of
       the  value  that  was  compiled  into  mpicc/mpiCC.   This  means  that
       mpicc/mpiCC will use the value of LAMHOME as the base to create the  -I
       and  -L  arguments that are passed to the lower-level compiler, not the
       installation directory that was supplied when mpicc/mpiCC were created.
       This is almost always a Bad Idea.

       The  use  of  LAMHOME is discouraged except for some rare configuration
       cases in oddly networked sites (in which case your system administrator
       should  probably  set  this  up),  and for advanced users with multiple
       LAM/MPI installations who really know  what  they  are  doing;  if  the
       LAMHOME  environment  variable is unintentionally left set, it can lead
       to tremendous user confusion.  For example, if LAMHOME  points  to  LAM
       installation  A, but the user’s PATH points to LAM installation B, then
       even though B’s mpicc will be used, the user program will  be  compiled
       and linked against LAM installation A.

       The LAMHOME environment variable is mainly only left in place for back-
       wards compatibility; it is  not  required  for  normal  functioning  of
       LAM/MPI.   The  LAM Team discourages the use of the LAMHOME environment
       variable, and instead advocates simply setting  the  PATH  properly  to
       switch between multiple LAM/MPI implementations.

NOTES

       Previous  versions  of LAM encouraged the use of hcc and hcp to compile
       LAM and/or MPI C and C++ applications, respectively.  In very old  ver-
       sions  of  LAM, hcc and hcp did not automatically add -lmpi to the com-
       mand line.  hcc and hcp were eventually deprecated  and  replaced  with
       mpicc  and mpiCC (or mpic++ on case-insensitive filesystems).  The exe-
       cutables hcc and hcp are now simply symbolic links to mpicc and mpic++,
       respectively,  just  in  case  there’s anyone out there that still uses
       those names.  It should be harmless to pass in  the  additional  -lmpi;
       mpicc  and  mpic++ should silently do the Right Thing (only link in the
       MPI library once).

SEE ALSO

       cc(1), CC(1), ld(1), lam-helpfile(5), mpif77(1)



LAM 7.1.1                       September, 2004                       mpicc(1)