Kubernetes集群的安装部署

最新推荐文章于 2024-04-28 15:36:58 发布

上方谷的雨

最新推荐文章于 2024-04-28 15:36:58 发布

阅读量415

点赞数

本文链接：https://blog.csdn.net/sillyzhangye/article/details/86588040

版权

Kubernetes集群的安装部署

此文参照https://www.cnblogs.com/zhenyuyaodidiao/p/6500830.html，并根据实操过程略作修改。

1、环境介绍及准备：

1.1 物理机操作系统

　　物理机操作系统采用Centos7.3 64位，细节如下。

[root@k8s-master ~]# uname -a
Linux k8s-master 3.10.0-327.el7.x86_64 #1 SMP Thu Nov 19 22:10:57 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
[root@k8s-master ~]# cat /etc/redhat-release
CentOS Linux release 7.6.1810 (Core)

1.2 主机信息

本文准备了三台机器用于部署k8s的运行环境，细节如下：

节点及功能	主机名	IP
Master、etcd、registry	K8s-master	192.168.44.60
Node1	K8s-slave01	192.168.44.61
Node2	K8s-slave02	192.168.44.62

另外三台机器做了ssh免密登录，免密登录示例

并且做如下配置（三台机器都需要）

[root@k8s-master ~]# cat /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6

192.168.44.60 etcd
192.168.44.60 registry

192.168.44.60 k8s-master
192.168.44.61 k8s-slave01
192.168.44.62 k8s-slave02

1.3 关闭三台机器上的防火墙

systemctl disable firewalld.service
systemctl stop firewalld.service

2、部署etcd

k8s运行依赖etcd，需要先部署etcd，本文采用yum方式安装：

[root@k8s-master ~]# yum install etcd -y

yum安装的etcd默认配置文件在/etc/etcd/etcd.conf。编辑配置文件，更改以下带颜色部分信息：

[root@k8s-master ~]# vim /etc/etcd/etcd.conf

# [member]
ETCD_NAME=master
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
#ETCD_WAL_DIR=""
#ETCD_SNAPSHOT_COUNT="10000"
#ETCD_HEARTBEAT_INTERVAL="100"
#ETCD_ELECTION_TIMEOUT="1000"
#ETCD_LISTEN_PEER_URLS="http://0.0.0.0:2380"
ETCD_LISTEN_CLIENT_URLS="http://0.0.0.0:2379,http://0.0.0.0:4001"
#ETCD_MAX_SNAPSHOTS="5"
#ETCD_MAX_WALS="5"
#ETCD_CORS=""
#
#[cluster]
#ETCD_INITIAL_ADVERTISE_PEER_URLS="http://localhost:2380"
# if you use different ETCD_NAME (e.g. test), set ETCD_INITIAL_CLUSTER value for this name, i.e. "test=http://..."
#ETCD_INITIAL_CLUSTER="default=http://localhost:2380"
#ETCD_INITIAL_CLUSTER_STATE="new"
#ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_ADVERTISE_CLIENT_URLS="http://etcd:2379,http://etcd:4001"
#ETCD_DISCOVERY=""
#ETCD_DISCOVERY_SRV=""
#ETCD_DISCOVERY_FALLBACK="proxy"
#ETCD_DISCOVERY_PROXY=""

启动并验证状态

[root@k8s-master ~]# systemctl start etcd
[root@k8s-master ~]# etcdctl set testdir/testkey0 0
0
[root@k8s-master ~]# etcdctl get testdir/testkey0 
0
[root@k8s-master ~]# etcdctl -C http://etcd:4001 cluster-health
member 8e9e05c52164694d is healthy: got healthy result from http://etcd:2379
cluster is healthy
[root@k8s-master ~]# etcdctl -C http://etcd:2379 cluster-health
member 8e9e05c52164694d is healthy: got healthy result from http://etcd:2379
cluster is healthy

3、部署master

3.1 安装Docker

[root@k8s-master ~]# yum install docker

配置Docker配置文件，使其允许从registry中拉取镜像。

[root@k8s-master ~]# vim /etc/sysconfig/docker

# /etc/sysconfig/docker

# Modify these options if you want to change the way the docker daemon runs
OPTIONS='--selinux-enabled=false --log-driver=journald --signature-verification=false'
if [ -z "${DOCKER_CERT_PATH}" ]; then
    DOCKER_CERT_PATH=/etc/docker
fi
OPTIONS='--insecure-registry registry:5000'

ps：上面这个配置（OPTIONS='--insecure-registry registry:5000'），是配置使用本地镜像库，本地镜像库的搭建和使用可参照这篇文章：Docker私有仓库的搭建及使用

设置开机自启动并开启服务

[root@k8s-master ~]# chkconfig docker on
[root@k8s-master ~]# service docker start

3.2 安装kubernets

[root@k8s-master ~]# yum install kubernetes

3.3 配置并启动kubernetes

在kubernetes master上需要运行以下组件：

　　　　Kubernets API Server

　　　　Kubernets Controller Manager

　　　　Kubernets Scheduler

相应的要更改以下几个配置中带颜色部分信息：

3.3.1 /etc/kubernetes/apiserver

[root@k8s-master ~]# vim /etc/kubernetes/apiserver

###
# kubernetes system config
#
# The following values are used to configure the kube-apiserver
#

# The address on the local server to listen to.
KUBE_API_ADDRESS="--insecure-bind-address=0.0.0.0"

# The port on the local server to listen on.
KUBE_API_PORT="--port=8080"

# Port minions listen on
# KUBELET_PORT="--kubelet-port=10250"

# Comma separated list of nodes in the etcd cluster
KUBE_ETCD_SERVERS="--etcd-servers=http://etcd:2379"

# Address range to use for services
KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.254.0.0/16"

# default admission control policies
#KUBE_ADMISSION_CONTROL="--admission-control=NamespaceLifecycle,NamespaceExists,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota"
KUBE_ADMISSION_CONTROL="--admission-control=NamespaceLifecycle,NamespaceExists,LimitRanger,SecurityContextDeny,ResourceQuota"

# Add your own!
KUBE_API_ARGS=""

3.3.2 /etc/kubernetes/config

[root@k8s-master ~]# vim /etc/kubernetes/config

###
# kubernetes system config
#
# The following values are used to configure various aspects of all
# kubernetes services, including
#
#   kube-apiserver.service
#   kube-controller-manager.service
#   kube-scheduler.service
#   kubelet.service
#   kube-proxy.service
# logging to stderr means we get it in the systemd journal
KUBE_LOGTOSTDERR="--logtostderr=true"

# journal message level, 0 is debug
KUBE_LOG_LEVEL="--v=0"

# Should this cluster be allowed to run privileged docker containers
KUBE_ALLOW_PRIV="--allow-privileged=false"

# How the controller-manager, scheduler, and proxy find the apiserver
KUBE_MASTER="--master=http://k8s-master:8080"

启动服务并设置开机自启动

[root@k8s-master ~]# systemctl enable kube-apiserver.service
[root@k8s-master ~]# systemctl start kube-apiserver.service
[root@k8s-master ~]# systemctl enable kube-controller-manager.service
[root@k8s-master ~]# systemctl start kube-controller-manager.service
[root@k8s-master ~]# systemctl enable kube-scheduler.service
[root@k8s-master ~]# systemctl start kube-scheduler.service

4、部署node(注意,两台slave的node机器都需要操作一遍)

4.1 安装docker

　　参见3.1

4.2 安装kubernets

两台slave的node机器上分别yum安装

yum install kubernetes

4.3 配置并启动kubernetes

　　在kubernetes node上需要运行以下组件：

　　　　Kubelet

　　　　Kubernets Proxy

相应的要更改以下几个配置文中带颜色部分信息：

4.3.1 /etc/kubernetes/config

[root@K8s-slave01 ~]# vim /etc/kubernetes/config

###
# kubernetes system config
#
# The following values are used to configure various aspects of all
# kubernetes services, including
#
#   kube-apiserver.service
#   kube-controller-manager.service
#   kube-scheduler.service
#   kubelet.service
#   kube-proxy.service
# logging to stderr means we get it in the systemd journal
KUBE_LOGTOSTDERR="--logtostderr=true"

# journal message level, 0 is debug
KUBE_LOG_LEVEL="--v=0"

# Should this cluster be allowed to run privileged docker containers
KUBE_ALLOW_PRIV="--allow-privileged=false"

# How the controller-manager, scheduler, and proxy find the apiserver
KUBE_MASTER="--master=http://k8s-master:8080"

4.3.2 /etc/kubernetes/kubelet

[root@K8s-slave01 ~]# vim /etc/kubernetes/kubelet

###
# kubernetes kubelet (minion) config

# The address for the info server to serve on (set to 0.0.0.0 or "" for all interfaces)
KUBELET_ADDRESS="--address=0.0.0.0"

# The port for the info server to serve on
# KUBELET_PORT="--port=10250"

# You may leave this blank to use the actual hostname  注意修改成自己的节点名称
KUBELET_HOSTNAME="--hostname-override=k8s-slave01"

# location of the api-server  修改成自己的主节点名称
KUBELET_API_SERVER="--api-servers=http://k8s-master:8080"

# pod infrastructure container  记住这个地方,后面会对此讲解
KUBELET_POD_INFRA_CONTAINER="--pod-infra-container-image=registry.access.redhat.com/rhel7/pod-infrastructure:latest"

# Add your own!
KUBELET_ARGS=""

启动服务并设置开机自启动

[root@k8s-master ~]# systemctl enable kubelet.service
[root@k8s-master ~]# systemctl start kubelet.service
[root@k8s-master ~]# systemctl enable kube-proxy.service
[root@k8s-master ~]# systemctl start kube-proxy.service

4.4 查看状态

在master上查看集群中节点及节点状态

[root@k8s-master ~]#  kubectl -s http://k8s-master:8080 get node
NAME         STATUS    AGE
k8s-slave01   Ready     39s
k8s-slave02   Ready     45s
[root@k8s-master ~]# kubectl get nodes
NAME         STATUS    AGE
k8s-slave01   Ready     50s
k8s-slave02   Ready     56s

至此，已经搭建了一个kubernetes集群，但目前该集群还不能很好的工作，请继续后续的步骤。

5、创建覆盖网络——Flannel

5.1 安装Flannel

在master、node上均执行如下命令，进行安装

[root@k8s-master ~]# yum install flannel

5.2 配置Flannel

master、node上均编辑/etc/sysconfig/flanneld，修改红色部分

[root@k8s-master ~]# vi /etc/sysconfig/flanneld

# Flanneld configuration options

# etcd url location.  Point this to the server where etcd runs
FLANNEL_ETCD_ENDPOINTS="http://etcd:2379"

# etcd config key.  This is the configuration key that flannel queries
# For address range assignment
FLANNEL_ETCD_PREFIX="/atomic.io/network"

# Any additional options that you want to pass
#FLANNEL_OPTIONS=""

5.3 配置etcd中关于flannel的key

Flannel使用Etcd进行配置，来保证多个Flannel实例之间的配置一致性，所以需要在etcd上进行如下配置：（‘/atomic.io/network/config’这个key与上文/etc/sysconfig/flannel中的配置项FLANNEL_ETCD_PREFIX是相对应的，值里面的ip可以参照ifconfig列出的docker0一项的ip，错误的话启动就会出错）

值参照如下

[root@k8s-slave01 ~]# ifconfig
docker0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1472
        inet 172.17.78.1  netmask 255.255.255.0  broadcast 0.0.0.0
        inet6 fe80::42:d9ff:fe56:982c  prefixlen 64  scopeid 0x20<link>
.....

执行下面命令

[root@k8s-master ~]# etcdctl mk /atomic.io/network/config '{ "Network": "172.17.0.1/16" }'
{ "Network": "172.17.0.1/16" }

5.4 启动

启动Flannel之后，需要依次重启docker、kubernete。

在master执行：

systemctl enable flanneld.service 
systemctl start flanneld.service 
service docker restart
systemctl restart kube-apiserver.service
systemctl restart kube-controller-manager.service
systemctl restart kube-scheduler.service

在node上执行：

systemctl enable flanneld.service 
systemctl start flanneld.service 
service docker restart
systemctl restart kubelet.service
systemctl restart kube-proxy.service

至此集群基本搭建完毕，但是一般企业里面都需要一个web的ui页面，所以下文讲解如何在集群的基础上搭建ui界面。

posted @ 2019-01-16 17:18 青衫仗剑阅读( ...) 评论( ...) 编辑收藏

上方谷的雨

关注

0
点赞
踩
0

收藏

觉得还不错? 一键收藏
0
评论
Kubernetes集群的安装部署

Kubernetes集群的安装部署此文参照https://www.cnblogs.com/zhenyuyaodidiao/p/6500830.html，并根据实操过程略作修改。1、环境介绍及准备：1.1 物理机操作系统　　物理机操作系统采用Centos7.3 64位，细节如下。[root@k8s-master ~]# unam...
复制链接

扫一扫