锐捷Ruijie路由器版本升级

这篇博客详细记录了如何升级RSR30-X-SPU10路由器的过程,包括使用TFTP服务器,设置互联IP地址,从TFTP拷贝版本文件到路由器并确认升级成功。升级后,系统软件版本更新为RGOS10.4(3b90)Release,并进行了配置保存与设备重启。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

1.路由器型号及版本

型号:RSR30-X-SPU10

当前版本:RGOS 10.4(3b36) Release(192911)

2.升级路由器

(1)电脑搭建TFTP,手动将版本文件重命名为rgos.bin

(2)电脑与路由器网线互联,配置互联IP地址,电脑IP-192.168.10.2,路由器IP-192.168.10.1

(3)登录路由器,从TFTP服务器拷贝版本文件至交换机

(4)删除互联IP地址

route# copy tftp:   flash:
Address of remote host []?192.168.10.2
Source filename []?rgos.bin
Extended commands [n]: 回车
Destination filename [rgos.bin]?rgos.bin
Accessing tftp://192.168.10.2/rgos.bin...
System is running defragment,please wait.... 
Press Ctrl+C to quit
The file has existed, do you want to overwrite it? [yes/no]: yes
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Transmission finished, file length 25803488 bytes.
Verify the image ......[ok]

CURRENT PRODUCT INFORMATION :
  PRODUCT ID: 0x100F0060
  PRODUCT DESCRIPTION: Ruijie Router (RSR30-X-SPU10) by Ruijie Networks

SUCCESS: UPGRADING OK.
route#wr

Building configuration...
Write to boot config file: [/config.text]

[OK]
route#reload
Proceed with reload? [no]y
Verify the image ......[ok]

*Jul 31 16:05:29: %SYS-5-RELOAD: The device is reloading due to the execution of command reload.

中间输入的日志省略,自动重启完成后会提示输入账号密码

route>en

route#show version 
System description      : Ruijie Router (RSR30-X-SPU10) by Ruijie Networks
System start time       : 2022-07-31 16:8:30
System uptime           : 0:0:2:59
System software version : RGOS 10.4(3b90) Release(222488)
System BOOT version     : 10.4(3b90) Release(222488)(Master), 10.4(3b33) Release(184295)

route#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
route(config)# int gi0/0/6
route(config-if-GigabitEthernet 0/0/6)#no ip add 
%notice: all IPv4 addresses on this interface are removed.


route#wr
Building configuration...
Write to boot config file: [/config.text]

[OK]
 

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

Mr. Sun_

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值