STM32F767 LTDC 兼容横屏竖屏

已于 2022-12-01 22:24:15 修改
阅读量472 收藏 1
点赞数
分类专栏： STM32 文章标签： stm32 单片机 arm
于 2022-05-21 11:43:00 首次发布
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/smallerlang/article/details/124896270
版权 
/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : main.h
  * @brief          : Header for main.c file.
  *                   This file contains the common defines of the application.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */
/* USER CODE END Header */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MAIN_H
#define __MAIN_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f7xx_hal.h"

/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */

//extern SDRAM_HandleTypeDef hsdram1;
//extern SD_HandleTypeDef hsd1;
//extern QSPI_HandleTypeDef hqspi;
//extern NAND_HandleTypeDef hnand1;
//extern SAI_HandleTypeDef hsai_BlockA1;
//extern SAI_HandleTypeDef hsai_BlockB1;
//extern DMA_HandleTypeDef hdma_sai1_a;
//extern DMA_HandleTypeDef hdma_sai1_b;

#define LCD_WIDTH 480
#define LCD_HEIGHT 272

extern uint16_t FBuffer[LCD_WIDTH*LCD_HEIGHT];
extern uint32_t POINT_COLOR;		//画笔颜色
extern uint32_t BACK_COLOR;  	//背景色 

/* USER CODE END Includes */

/* Exported types ------------------------------------------------------------*/
/* USER CODE BEGIN ET */


/* USER CODE END ET */

/* Exported constants --------------------------------------------------------*/
/* USER CODE BEGIN EC */

/* USER CODE END EC */

/* Exported macro ------------------------------------------------------------*/
/* USER CODE BEGIN EM */

/* USER CODE END EM */

/* Exported functions prototypes ---------------------------------------------*/
void Error_Handler(void);

/* USER CODE BEGIN EFP */

/* USER CODE END EFP */

/* Private defines -----------------------------------------------------------*/
/* USER CODE BEGIN Private defines */

定义一些常用的数据类型短关键字 
//typedef int32_t  s32;
//typedef int16_t s16;
//typedef int8_t  s8;

//typedef const int32_t sc32;  
//typedef const int16_t sc16;  
//typedef const int8_t sc8;  

//typedef __IO int32_t  vs32;
//typedef __IO int16_t  vs16;
//typedef __IO int8_t   vs8;

//typedef __I int32_t vsc32;  
//typedef __I int16_t vsc16; 
//typedef __I int8_t vsc8;   

//typedef uint32_t  u32;
//typedef uint16_t u16;
//typedef uint8_t  u8;

//typedef const uint32_t uc32;  
//typedef const uint16_t uc16;  
//typedef const uint8_t uc8; 

//typedef __IO uint32_t  vu32;
//typedef __IO uint16_t vu16;
//typedef __IO uint8_t  vu8;

//typedef __I uint32_t vuc32;  
//typedef __I uint16_t vuc16; 
//typedef __I uint8_t vuc8; 

/* USER CODE END Private defines */

#ifdef __cplusplus
}
#endif

#endif /* __MAIN_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/


/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : main.c
  * @brief          : Main program body
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"

/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */

#include "delay.h"
#include "bsp_printf.h"
#include "bsp_key.h"
#include "string.h"
#include "usmart.h"
#include "usart.h"
#include "bsp_lcd.h"

/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */

/* USER CODE END PTD */

/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
/* USER CODE END PD */

/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */

/* USER CODE END PM */

/* Private variables ---------------------------------------------------------*/

LTDC_HandleTypeDef hltdc;

SDRAM_HandleTypeDef hsdram1;

/* USER CODE BEGIN PV */

uint16_t FBuffer[LCD_WIDTH*LCD_HEIGHT] __attribute__((at(0xC0000000))); 
uint32_t POINT_COLOR;		//画笔颜色
uint32_t BACK_COLOR;  	//背景色 

/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
static void MX_FMC_Init(void);
static void MX_LTDC_Init(void);
/* USER CODE BEGIN PFP */

/* USER CODE END PFP */

/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */

static void Sdram_SendCommand(uint32_t CommandMode, uint32_t CommandTarget, uint32_t AutoRefreshNumber, uint32_t ModeRegisterDefinition)
{
	FMC_SDRAM_CommandTypeDef Command;
	
	Command.AutoRefreshNumber = AutoRefreshNumber;
	Command.CommandMode = CommandMode;
	Command.CommandTarget = CommandTarget;
	Command.ModeRegisterDefinition = ModeRegisterDefinition;
	
	HAL_SDRAM_SendCommand(&hsdram1, &Command, 0);
}

static void Sdram_Init_Sequence(void)
{
	uint32_t ModeRegisterDefinition;
//	uint16_t Mode_WB;
//	uint16_t Mode_Op;
//	uint16_t Mode_CasLatency;
//	uint16_t Mode_Bt;
//	uint16_t Mode_BurstLength;
	
	Sdram_SendCommand(FMC_SDRAM_CMD_CLK_ENABLE, FMC_SDRAM_CMD_TARGET_BANK1, 0, 0);
	
	delay_us(200);
	
	Sdram_SendCommand(FMC_SDRAM_CMD_PALL, FMC_SDRAM_CMD_TARGET_BANK1, 0, 0);
	
	Sdram_SendCommand(FMC_SDRAM_CMD_AUTOREFRESH_MODE, FMC_SDRAM_CMD_TARGET_BANK1, 1, 0);
	
	//SDRAM????2?êy
	#define SDRAM_MODEREG_BURST_LENGTH_1             ((uint16_t)0x0000)
	#define SDRAM_MODEREG_BURST_LENGTH_2             ((uint16_t)0x0001)
	#define SDRAM_MODEREG_BURST_LENGTH_4             ((uint16_t)0x0002)
	#define SDRAM_MODEREG_BURST_LENGTH_8             ((uint16_t)0x0004)
	#define SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL      ((uint16_t)0x0000)
	#define SDRAM_MODEREG_BURST_TYPE_INTERLEAVED     ((uint16_t)0x0008)
	#define SDRAM_MODEREG_CAS_LATENCY_2              ((uint16_t)0x0020)
	#define SDRAM_MODEREG_CAS_LATENCY_3              ((uint16_t)0x0030)
	#define SDRAM_MODEREG_OPERATING_MODE_STANDARD    ((uint16_t)0x0000)
	#define SDRAM_MODEREG_WRITEBURST_MODE_PROGRAMMED ((uint16_t)0x0000)
	#define SDRAM_MODEREG_WRITEBURST_MODE_SINGLE     ((uint16_t)0x0200)

	ModeRegisterDefinition=(uint32_t)SDRAM_MODEREG_BURST_LENGTH_1          |	
              SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL   |	
              SDRAM_MODEREG_CAS_LATENCY_3           |	
              SDRAM_MODEREG_OPERATING_MODE_STANDARD |   
              SDRAM_MODEREG_WRITEBURST_MODE_SINGLE;     

	Sdram_SendCommand(FMC_SDRAM_CMD_LOAD_MODE, FMC_SDRAM_CMD_TARGET_BANK1, 1, ModeRegisterDefinition);
	
	HAL_SDRAM_ProgramRefreshRate(&hsdram1, 824);
}


/* USER CODE END 0 */

/**
  * @brief  The application entry point.
  * @retval int
  */
int main(void)
{
  /* USER CODE BEGIN 1 */

  /* USER CODE END 1 */

  /* MCU Configuration--------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* USER CODE BEGIN Init */

  /* USER CODE END Init */

  /* Configure the system clock */
  SystemClock_Config();

  /* USER CODE BEGIN SysInit */
	
  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  MX_FMC_Init();
  MX_LTDC_Init();
  /* USER CODE BEGIN 2 */
	
	uart_init(115200);		        //串口初始化 
	usmart_dev.init(108); 		    //初始化USMART	
	LCD_Set_Dir(1);
	
	delay_init(216);
	delay_ms(5000);
	
	HAL_GPIO_WritePin(GPIOB, GPIO_PIN_1, GPIO_PIN_SET);
	HAL_GPIO_WritePin(GPIOB, GPIO_PIN_5, GPIO_PIN_SET);
	
	Sdram_Init_Sequence();
	
	uint8_t x=0;

  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */
  while (1)
  {
		switch(x)
		{
			case 0:LTDC_Clear(WHITE);break;
			case 1:LTDC_Clear(BLACK);break;
			case 2:LTDC_Clear(BLUE);break;
			case 3:LTDC_Clear(RED);break;
			case 4:LTDC_Clear(MAGENTA);break;
			case 5:LTDC_Clear(GREEN);break;
			case 6:LTDC_Clear(CYAN);break; 
			case 7:LTDC_Clear(YELLOW);break;
			case 8:LTDC_Clear(BRRED);break;
			case 9:LTDC_Clear(GRAY);break;
			case 10:LTDC_Clear(LGRAY);break;
			case 11:LTDC_Clear(BROWN);break;
		}
		POINT_COLOR=RED;	  
		LCD_ShowString(10,40,260,32,32,"Apollo STM32F4/F7"); 	
		LCD_ShowString(10,80,240,24,24,"LTDC TEST");
		LCD_ShowString(10,110,240,16,16,"ATOM@ALIENTEK");     					 
		LCD_ShowString(10,150,240,12,12,"2016/7/12");	      					  
	  x++;
		if(x==12)x=0;
		delay_ms(1000);	
		
    /* USER CODE END WHILE */

    /* USER CODE BEGIN 3 */
  }
  /* USER CODE END 3 */
}

/**
  * @brief System Clock Configuration
  * @retval None
  */
void SystemClock_Config(void)
{
  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
  RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};

  /** Configure LSE Drive Capability
  */
  HAL_PWR_EnableBkUpAccess();
  /** Configure the main internal regulator output voltage
  */
  __HAL_RCC_PWR_CLK_ENABLE();
  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
  /** Initializes the RCC Oscillators according to the specified parameters
  * in the RCC_OscInitTypeDef structure.
  */
  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
  RCC_OscInitStruct.PLL.PLLM = 25;
  RCC_OscInitStruct.PLL.PLLN = 432;
  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
  RCC_OscInitStruct.PLL.PLLQ = 9;
  RCC_OscInitStruct.PLL.PLLR = 2;
  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
  {
    Error_Handler();
  }
  /** Activate the Over-Drive mode
  */
  if (HAL_PWREx_EnableOverDrive() != HAL_OK)
  {
    Error_Handler();
  }
  /** Initializes the CPU, AHB and APB buses clocks
  */
  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;

  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7) != HAL_OK)
  {
    Error_Handler();
  }
  PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_LTDC;
  PeriphClkInitStruct.PLLSAI.PLLSAIN = 288;
  PeriphClkInitStruct.PLLSAI.PLLSAIR = 4;
  PeriphClkInitStruct.PLLSAI.PLLSAIQ = 4;
  PeriphClkInitStruct.PLLSAI.PLLSAIP = RCC_PLLSAIP_DIV2;
  PeriphClkInitStruct.PLLSAIDivQ = 1;
  PeriphClkInitStruct.PLLSAIDivR = RCC_PLLSAIDIVR_8;
  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
  {
    Error_Handler();
  }
  /** Enables the Clock Security System
  */
  HAL_RCC_EnableCSS();
}

/**
  * @brief LTDC Initialization Function
  * @param None
  * @retval None
  */
static void MX_LTDC_Init(void)
{

  /* USER CODE BEGIN LTDC_Init 0 */

  /* USER CODE END LTDC_Init 0 */

  LTDC_LayerCfgTypeDef pLayerCfg = {0};

  /* USER CODE BEGIN LTDC_Init 1 */

  /* USER CODE END LTDC_Init 1 */
  hltdc.Instance = LTDC;
  hltdc.Init.HSPolarity = LTDC_HSPOLARITY_AL;
  hltdc.Init.VSPolarity = LTDC_VSPOLARITY_AL;
  hltdc.Init.DEPolarity = LTDC_DEPOLARITY_AL;
  hltdc.Init.PCPolarity = LTDC_PCPOLARITY_IPC;
  hltdc.Init.HorizontalSync = 0;
  hltdc.Init.VerticalSync = 0;
  hltdc.Init.AccumulatedHBP = 40;
  hltdc.Init.AccumulatedVBP = 8;
  hltdc.Init.AccumulatedActiveW = 520;
  hltdc.Init.AccumulatedActiveH = 280;
  hltdc.Init.TotalWidth = 525;
  hltdc.Init.TotalHeigh = 288;
  hltdc.Init.Backcolor.Blue = 0;
  hltdc.Init.Backcolor.Green = 0;
  hltdc.Init.Backcolor.Red = 0;
  if (HAL_LTDC_Init(&hltdc) != HAL_OK)
  {
    Error_Handler();
  }
  pLayerCfg.WindowX0 = 0;
  pLayerCfg.WindowX1 = 480;
  pLayerCfg.WindowY0 = 0;
  pLayerCfg.WindowY1 = 272;
  pLayerCfg.PixelFormat = LTDC_PIXEL_FORMAT_RGB565;
  pLayerCfg.Alpha = 255;
  pLayerCfg.Alpha0 = 0;
  pLayerCfg.BlendingFactor1 = LTDC_BLENDING_FACTOR1_PAxCA;
  pLayerCfg.BlendingFactor2 = LTDC_BLENDING_FACTOR2_PAxCA;
  pLayerCfg.FBStartAdress = 0xc0000000;
  pLayerCfg.ImageWidth = 480;
  pLayerCfg.ImageHeight = 272;
  pLayerCfg.Backcolor.Blue = 0;
  pLayerCfg.Backcolor.Green = 0;
  pLayerCfg.Backcolor.Red = 0;
  if (HAL_LTDC_ConfigLayer(&hltdc, &pLayerCfg, 0) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN LTDC_Init 2 */

  /* USER CODE END LTDC_Init 2 */

}

/* FMC initialization function */
static void MX_FMC_Init(void)
{

  /* USER CODE BEGIN FMC_Init 0 */

  /* USER CODE END FMC_Init 0 */

  FMC_SDRAM_TimingTypeDef SdramTiming = {0};

  /* USER CODE BEGIN FMC_Init 1 */

  /* USER CODE END FMC_Init 1 */

  /** Perform the SDRAM1 memory initialization sequence
  */
  hsdram1.Instance = FMC_SDRAM_DEVICE;
  /* hsdram1.Init */
  hsdram1.Init.SDBank = FMC_SDRAM_BANK1;
  hsdram1.Init.ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_9;
  hsdram1.Init.RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_13;
  hsdram1.Init.MemoryDataWidth = FMC_SDRAM_MEM_BUS_WIDTH_16;
  hsdram1.Init.InternalBankNumber = FMC_SDRAM_INTERN_BANKS_NUM_4;
  hsdram1.Init.CASLatency = FMC_SDRAM_CAS_LATENCY_3;
  hsdram1.Init.WriteProtection = FMC_SDRAM_WRITE_PROTECTION_DISABLE;
  hsdram1.Init.SDClockPeriod = FMC_SDRAM_CLOCK_PERIOD_2;
  hsdram1.Init.ReadBurst = FMC_SDRAM_RBURST_ENABLE;
  hsdram1.Init.ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_0;
  /* SdramTiming */
  SdramTiming.LoadToActiveDelay = 2;
  SdramTiming.ExitSelfRefreshDelay = 8;
  SdramTiming.SelfRefreshTime = 4;
  SdramTiming.RowCycleDelay = 7;
  SdramTiming.WriteRecoveryTime = 3;
  SdramTiming.RPDelay = 2;
  SdramTiming.RCDDelay = 2;

  if (HAL_SDRAM_Init(&hsdram1, &SdramTiming) != HAL_OK)
  {
    Error_Handler( );
  }

  /* USER CODE BEGIN FMC_Init 2 */

  /* USER CODE END FMC_Init 2 */
}

/**
  * @brief GPIO Initialization Function
  * @param None
  * @retval None
  */
static void MX_GPIO_Init(void)
{
  GPIO_InitTypeDef GPIO_InitStruct = {0};

  /* GPIO Ports Clock Enable */
  __HAL_RCC_GPIOC_CLK_ENABLE();
  __HAL_RCC_GPIOI_CLK_ENABLE();
  __HAL_RCC_GPIOF_CLK_ENABLE();
  __HAL_RCC_GPIOH_CLK_ENABLE();
  __HAL_RCC_GPIOB_CLK_ENABLE();
  __HAL_RCC_GPIOG_CLK_ENABLE();
  __HAL_RCC_GPIOE_CLK_ENABLE();
  __HAL_RCC_GPIOD_CLK_ENABLE();

  /*Configure GPIO pin Output Level */
  HAL_GPIO_WritePin(GPIOB, GPIO_PIN_1|GPIO_PIN_5, GPIO_PIN_RESET);

  /*Configure GPIO pin : PB1 */
  GPIO_InitStruct.Pin = GPIO_PIN_1;
  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);

  /*Configure GPIO pin : PB5 */
  GPIO_InitStruct.Pin = GPIO_PIN_5;
  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
  GPIO_InitStruct.Pull = GPIO_PULLUP;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);

}

/* USER CODE BEGIN 4 */

/* USER CODE END 4 */

/**
  * @brief  This function is executed in case of error occurrence.
  * @retval None
  */
void Error_Handler(void)
{
  /* USER CODE BEGIN Error_Handler_Debug */
  /* User can add his own implementation to report the HAL error return state */
  __disable_irq();
  while (1)
  {
  }
  /* USER CODE END Error_Handler_Debug */
}

#ifdef  USE_FULL_ASSERT
/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t *file, uint32_t line)
{
  /* USER CODE BEGIN 6 */
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
  /* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/


#include "usmart.h"
#include "usmart_str.h"
用户配置区///
//这下面要包含所用到的函数所申明的头文件(用户自己添加) 
#include "delay.h"	 	
#include "main.h"
#include "bsp_lcd.h"
								 
//extern void led_set(uint8_t sta);
//extern void test_fun(void(*ledset)(uint8_t),uint8_t sta);										  
//函数名列表初始化(用户自己添加)
//用户直接在这里输入要执行的函数名及其查找串
struct _m_usmart_nametab usmart_nametab[]=
{
#if USMART_USE_WRFUNS==1 	//如果使能了读写操作
	(void*)read_addr,"uint32_t read_addr(uint32_t addr)",
	(void*)write_addr,"void write_addr(uint32_t addr,uint32_t val)",	 
#endif		   
	(void*)delay_ms,"void delay_ms(uint16_t nms)",
 	(void*)delay_us,"void delay_us(uint32_t nus)",	 

	(void*)LCD_Set_Dir,"void LCD_Set_Dir(uint8_t dir)"
};						  
///END///
/
//函数控制管理器初始化
//得到各个受控函数的名字
//得到函数总数量
struct _m_usmart_dev usmart_dev=
{
	usmart_nametab,
	usmart_init,
	usmart_cmd_rec,
	usmart_exe,
	usmart_scan,
	sizeof(usmart_nametab)/sizeof(struct _m_usmart_nametab),//函数数量
	0,	  	//参数数量
	0,	 	//函数ID
	1,		//参数显示类型,0,10进制;1,16进制
	0,		//参数类型.bitx:,0,数字;1,字符串	    
	0,	  	//每个参数的长度暂存表,需要MAX_PARM个0初始化
	0,		//函数的参数,需要PARM_LEN个0初始化
};   



/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file         stm32f7xx_hal_msp.c
  * @brief        This file provides code for the MSP Initialization
  *               and de-Initialization codes.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */
/* USER CODE END Header */

/* Includes ------------------------------------------------------------------*/
#include "main.h"
/* USER CODE BEGIN Includes */

/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN TD */

/* USER CODE END TD */

/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN Define */

/* USER CODE END Define */

/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN Macro */

/* USER CODE END Macro */

/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */

/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/
/* USER CODE BEGIN PFP */

/* USER CODE END PFP */

/* External functions --------------------------------------------------------*/
/* USER CODE BEGIN ExternalFunctions */

/* USER CODE END ExternalFunctions */

/* USER CODE BEGIN 0 */

/* USER CODE END 0 */
/**
  * Initializes the Global MSP.
  */
void HAL_MspInit(void)
{
  /* USER CODE BEGIN MspInit 0 */

  /* USER CODE END MspInit 0 */

  __HAL_RCC_PWR_CLK_ENABLE();
  __HAL_RCC_SYSCFG_CLK_ENABLE();

  /* System interrupt init*/

  /* USER CODE BEGIN MspInit 1 */

  /* USER CODE END MspInit 1 */
}

/**
* @brief LTDC MSP Initialization
* This function configures the hardware resources used in this example
* @param hltdc: LTDC handle pointer
* @retval None
*/
void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
{
  GPIO_InitTypeDef GPIO_InitStruct = {0};
  if(hltdc->Instance==LTDC)
  {
  /* USER CODE BEGIN LTDC_MspInit 0 */

  /* USER CODE END LTDC_MspInit 0 */
    /* Peripheral clock enable */
    __HAL_RCC_LTDC_CLK_ENABLE();

    __HAL_RCC_GPIOI_CLK_ENABLE();
    __HAL_RCC_GPIOF_CLK_ENABLE();
    __HAL_RCC_GPIOH_CLK_ENABLE();
    __HAL_RCC_GPIOG_CLK_ENABLE();
    /**LTDC GPIO Configuration
    PI9     ------> LTDC_VSYNC
    PI10     ------> LTDC_HSYNC
    PF10     ------> LTDC_DE
    PH9     ------> LTDC_R3
    PH10     ------> LTDC_R4
    PH11     ------> LTDC_R5
    PH12     ------> LTDC_R6
    PG6     ------> LTDC_R7
    PG7     ------> LTDC_CLK
    PH13     ------> LTDC_G2
    PH14     ------> LTDC_G3
    PH15     ------> LTDC_G4
    PI0     ------> LTDC_G5
    PI1     ------> LTDC_G6
    PI2     ------> LTDC_G7
    PG11     ------> LTDC_B3
    PI4     ------> LTDC_B4
    PI5     ------> LTDC_B5
    PI6     ------> LTDC_B6
    PI7     ------> LTDC_B7
    */
    GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_1
                          |GPIO_PIN_2|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6
                          |GPIO_PIN_7;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
    GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
    HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);

    GPIO_InitStruct.Pin = GPIO_PIN_10;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
    GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
    HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);

    GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12
                          |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
    GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
    HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);

    GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7|GPIO_PIN_11;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
    GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
    HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);

  /* USER CODE BEGIN LTDC_MspInit 1 */

  /* USER CODE END LTDC_MspInit 1 */
  }

}

/**
* @brief LTDC MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hltdc: LTDC handle pointer
* @retval None
*/
void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
{
  if(hltdc->Instance==LTDC)
  {
  /* USER CODE BEGIN LTDC_MspDeInit 0 */

  /* USER CODE END LTDC_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_LTDC_CLK_DISABLE();

    /**LTDC GPIO Configuration
    PI9     ------> LTDC_VSYNC
    PI10     ------> LTDC_HSYNC
    PF10     ------> LTDC_DE
    PH9     ------> LTDC_R3
    PH10     ------> LTDC_R4
    PH11     ------> LTDC_R5
    PH12     ------> LTDC_R6
    PG6     ------> LTDC_R7
    PG7     ------> LTDC_CLK
    PH13     ------> LTDC_G2
    PH14     ------> LTDC_G3
    PH15     ------> LTDC_G4
    PI0     ------> LTDC_G5
    PI1     ------> LTDC_G6
    PI2     ------> LTDC_G7
    PG11     ------> LTDC_B3
    PI4     ------> LTDC_B4
    PI5     ------> LTDC_B5
    PI6     ------> LTDC_B6
    PI7     ------> LTDC_B7
    */
    HAL_GPIO_DeInit(GPIOI, GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_1
                          |GPIO_PIN_2|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6
                          |GPIO_PIN_7);

    HAL_GPIO_DeInit(GPIOF, GPIO_PIN_10);

    HAL_GPIO_DeInit(GPIOH, GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12
                          |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);

    HAL_GPIO_DeInit(GPIOG, GPIO_PIN_6|GPIO_PIN_7|GPIO_PIN_11);

  /* USER CODE BEGIN LTDC_MspDeInit 1 */

  /* USER CODE END LTDC_MspDeInit 1 */
  }

}

static uint32_t FMC_Initialized = 0;

static void HAL_FMC_MspInit(void){
  /* USER CODE BEGIN FMC_MspInit 0 */

  /* USER CODE END FMC_MspInit 0 */
  GPIO_InitTypeDef GPIO_InitStruct ={0};
  if (FMC_Initialized) {
    return;
  }
  FMC_Initialized = 1;

  /* Peripheral clock enable */
  __HAL_RCC_FMC_CLK_ENABLE();

  /** FMC GPIO Configuration
  PF0   ------> FMC_A0
  PF1   ------> FMC_A1
  PF2   ------> FMC_A2
  PF3   ------> FMC_A3
  PF4   ------> FMC_A4
  PF5   ------> FMC_A5
  PC0   ------> FMC_SDNWE
  PC2   ------> FMC_SDNE0
  PC3   ------> FMC_SDCKE0
  PF11   ------> FMC_SDNRAS
  PF12   ------> FMC_A6
  PF13   ------> FMC_A7
  PF14   ------> FMC_A8
  PF15   ------> FMC_A9
  PG0   ------> FMC_A10
  PG1   ------> FMC_A11
  PE7   ------> FMC_D4
  PE8   ------> FMC_D5
  PE9   ------> FMC_D6
  PE10   ------> FMC_D7
  PE11   ------> FMC_D8
  PE12   ------> FMC_D9
  PE13   ------> FMC_D10
  PE14   ------> FMC_D11
  PE15   ------> FMC_D12
  PD8   ------> FMC_D13
  PD9   ------> FMC_D14
  PD10   ------> FMC_D15
  PD14   ------> FMC_D0
  PD15   ------> FMC_D1
  PG2   ------> FMC_A12
  PG4   ------> FMC_BA0
  PG5   ------> FMC_BA1
  PG8   ------> FMC_SDCLK
  PD0   ------> FMC_D2
  PD1   ------> FMC_D3
  PG15   ------> FMC_SDNCAS
  PE0   ------> FMC_NBL0
  PE1   ------> FMC_NBL1
  */
  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12
                          |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
  GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
  HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);

  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_2|GPIO_PIN_3;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
  GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);

  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_4
                          |GPIO_PIN_5|GPIO_PIN_8|GPIO_PIN_15;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
  GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
  HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);

  GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
                          |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
  GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
  HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);

  GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14
                          |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
  GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
  HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);

  /* USER CODE BEGIN FMC_MspInit 1 */

  /* USER CODE END FMC_MspInit 1 */
}

void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef* hsdram){
  /* USER CODE BEGIN SDRAM_MspInit 0 */

  /* USER CODE END SDRAM_MspInit 0 */
  HAL_FMC_MspInit();
  /* USER CODE BEGIN SDRAM_MspInit 1 */

  /* USER CODE END SDRAM_MspInit 1 */
}

static uint32_t FMC_DeInitialized = 0;

static void HAL_FMC_MspDeInit(void){
  /* USER CODE BEGIN FMC_MspDeInit 0 */

  /* USER CODE END FMC_MspDeInit 0 */
  if (FMC_DeInitialized) {
    return;
  }
  FMC_DeInitialized = 1;
  /* Peripheral clock enable */
  __HAL_RCC_FMC_CLK_DISABLE();

  /** FMC GPIO Configuration
  PF0   ------> FMC_A0
  PF1   ------> FMC_A1
  PF2   ------> FMC_A2
  PF3   ------> FMC_A3
  PF4   ------> FMC_A4
  PF5   ------> FMC_A5
  PC0   ------> FMC_SDNWE
  PC2   ------> FMC_SDNE0
  PC3   ------> FMC_SDCKE0
  PF11   ------> FMC_SDNRAS
  PF12   ------> FMC_A6
  PF13   ------> FMC_A7
  PF14   ------> FMC_A8
  PF15   ------> FMC_A9
  PG0   ------> FMC_A10
  PG1   ------> FMC_A11
  PE7   ------> FMC_D4
  PE8   ------> FMC_D5
  PE9   ------> FMC_D6
  PE10   ------> FMC_D7
  PE11   ------> FMC_D8
  PE12   ------> FMC_D9
  PE13   ------> FMC_D10
  PE14   ------> FMC_D11
  PE15   ------> FMC_D12
  PD8   ------> FMC_D13
  PD9   ------> FMC_D14
  PD10   ------> FMC_D15
  PD14   ------> FMC_D0
  PD15   ------> FMC_D1
  PG2   ------> FMC_A12
  PG4   ------> FMC_BA0
  PG5   ------> FMC_BA1
  PG8   ------> FMC_SDCLK
  PD0   ------> FMC_D2
  PD1   ------> FMC_D3
  PG15   ------> FMC_SDNCAS
  PE0   ------> FMC_NBL0
  PE1   ------> FMC_NBL1
  */
  HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
                          |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12
                          |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);

  HAL_GPIO_DeInit(GPIOC, GPIO_PIN_0|GPIO_PIN_2|GPIO_PIN_3);

  HAL_GPIO_DeInit(GPIOG, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_4
                          |GPIO_PIN_5|GPIO_PIN_8|GPIO_PIN_15);

  HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
                          |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
                          |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1);

  HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14
                          |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1);

  /* USER CODE BEGIN FMC_MspDeInit 1 */

  /* USER CODE END FMC_MspDeInit 1 */
}

void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef* hsdram){
  /* USER CODE BEGIN SDRAM_MspDeInit 0 */

  /* USER CODE END SDRAM_MspDeInit 0 */
  HAL_FMC_MspDeInit();
  /* USER CODE BEGIN SDRAM_MspDeInit 1 */

  /* USER CODE END SDRAM_MspDeInit 1 */
}

/* USER CODE BEGIN 1 */

/* USER CODE END 1 */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/


#ifndef __BSP_LCD_H
#define __BSP_LCD_H

#ifdef __cplusplus
extern "C" {
#endif

#include "main.h"

//画笔颜色
#define WHITE         	 0xFFFF
#define BLACK         	 0x0000	  
#define BLUE         	 0x001F  
#define BRED             0XF81F
#define GRED 			 0XFFE0
#define GBLUE			 0X07FF
#define RED           	 0xF800
#define MAGENTA       	 0xF81F
#define GREEN         	 0x07E0
#define CYAN          	 0x7FFF
#define YELLOW        	 0xFFE0
#define BROWN 			 0XBC40 //棕色
#define BRRED 			 0XFC07 //棕红色
#define GRAY  			 0X8430 //灰色
#define LGRAY 			 0XC618 //浅灰色(PANNEL),窗体背景色

void LTDC_Draw_Point(uint16_t x,uint16_t y,uint32_t color);
void LCD_ShowChar(uint16_t x, uint16_t y, uint8_t num, uint8_t size, uint8_t mode);
void LCD_ShowString(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint8_t size, uint8_t *p);
void LTDC_Clear(uint32_t color);
void LTDC_Fill(uint16_t sx, uint16_t sy, uint16_t ex, uint16_t ey, uint32_t color);
void LCD_ShowNum(uint16_t x,uint16_t y,uint32_t num,uint8_t len,uint8_t size);
uint32_t LCD_Pow(uint8_t m,uint8_t n);
void LCD_Set_Dir(uint8_t dir);

#ifdef __cplusplus
}
#endif

#endif /* __BSP_LCD_H */



#include "bsp_lcd.h"
#include "bsp_font.h"

uint8_t lcd_dir = 0;//0:横屏、1：竖屏

//画点函数
//x,y:坐标
//color:颜色值
void LTDC_Draw_Point(uint16_t x,uint16_t y,uint32_t color)
{ 
	uint16_t dev_x, dev_y;
	
	if(lcd_dir)//竖屏
	{
		dev_x = y;
		dev_y = LCD_HEIGHT - 1 - x;
	}
	else//横屏
	{
		dev_x = x;
		dev_y = y;
	}
	if((dev_y < LCD_HEIGHT) && (dev_x < LCD_WIDTH)) FBuffer[dev_y * LCD_WIDTH + dev_x]=color; 
}

//在指定位置显示一个字符
//x,y:起始坐标
//num:要显示的字符:" "--->"~"
//size:字体大小 12/16/24/32
//mode:叠加方式(1)还是非叠加方式(0)
void LCD_ShowChar(uint16_t x, uint16_t y, uint8_t num, uint8_t size, uint8_t mode)
{  							  
  uint8_t temp,t1,t;
	uint16_t y0=y;
	uint8_t csize=(size/8+((size%8)?1:0))*(size/2);		//得到字体一个字符对应点阵集所占的字节数	
 	num=num-' ';//得到偏移后的值（ASCII字库是从空格开始取模，所以-' '就是对应字符的字库）
	for(t=0;t<csize;t++)
	{   
		if(size==12)temp=asc2_1206[num][t]; 	 	//调用1206字体
		else if(size==16)temp=asc2_1608[num][t];	//调用1608字体
		else if(size==24)temp=asc2_2412[num][t];	//调用2412字体
		else if(size==32)temp=asc2_3216[num][t];	//调用3216字体
		else return;								//没有的字库
		for(t1=0;t1<8;t1++)
		{			    
			if(temp&0x80)LTDC_Draw_Point(x,y,POINT_COLOR);
			else if(mode==0)LTDC_Draw_Point(x,y,BACK_COLOR);
			temp<<=1;
			y++;
			if(y>=LCD_HEIGHT)return;		//超区域了
			if((y-y0)==size)
			{
				y=y0;
				x++;
				if(x>=LCD_WIDTH)return;	//超区域了
				break;
			}
		}  	 
	}  	    	   	 	  
}   

//显示字符串
//x,y:起点坐标
//width,height:区域大小  
//size:字体大小
//*p:字符串起始地址		  
void LCD_ShowString(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint8_t size, uint8_t *p)
{         
	uint8_t x0=x;
	width+=x;
	height+=y;
	while((*p<='~')&&(*p>=' '))//判断是不是非法字符!
	{       
		if(x>=width){x=x0;y+=size;}
		if(y>=height)break;//退出
		LCD_ShowChar(x,y,*p,size,0);
		x+=size/2;
		p++;
	}  
}

//LCD清屏
//color:颜色值
void LTDC_Clear(uint32_t color)
{
	if(lcd_dir)//竖屏
	{
		LTDC_Fill(0,0,LCD_HEIGHT-1,LCD_WIDTH-1,color);
	}
	else//横屏
	{
		LTDC_Fill(0,0,LCD_WIDTH-1,LCD_HEIGHT-1,color);
	}
	
	
//	HAL_DMA2D_Start(&hdma2d, color, (uint32_t)FBuffer, LCD_WIDTH, LCD_HEIGHT); 
//	HAL_DMA2D_PollForTransfer(&hdma2d, 0X1FFFFF);
}

//(sx,sy),(ex,ey):填充矩形对角坐标,区域大小为:(ex-sx+1)*(ey-sy+1)   
//注意:sx,ex,不能大于lcddev.width-1;sy,ey,不能大于lcddev.height-1!!!
//color:要填充的颜色
void LTDC_Fill(uint16_t sx, uint16_t sy, uint16_t ex, uint16_t ey, uint32_t color)
{ 
 
	uint16_t i,j;
	for(j = sy; j <= ey; j++)
	{
		for(i = sx; i <= ex; i++)
		{
			LTDC_Draw_Point(i, j, color);
		}
	}
}

//显示数字,高位为0,则不显示
//x,y :起点坐标	 
//len :数字的位数
//size:字体大小
//color:颜色 
//num:数值(0~4294967295);	 
void LCD_ShowNum(uint16_t x,uint16_t y,uint32_t num,uint8_t len,uint8_t size)
{         	
	uint8_t t,temp;
	uint8_t enshow=0;						   
	for(t=0;t<len;t++)
	{
		temp=(num/LCD_Pow(10,len-t-1))%10;
		if(enshow==0&&t<(len-1))
		{
			if(temp==0)
			{
				LCD_ShowChar(x+(size/2)*t,y,' ',size,0);
				continue;
			}else enshow=1; 
		 	 
		}
	 	LCD_ShowChar(x+(size/2)*t,y,temp+'0',size,0); 
	}
} 

//m^n函数
//返回值:m^n次方.
uint32_t LCD_Pow(uint8_t m,uint8_t n) 
{
	uint32_t result=1;	 
	while(n--)result*=m;    
	return result;
}	

//dir:0-横屏、1-竖屏
void LCD_Set_Dir(uint8_t dir)
{
	lcd_dir = dir;
}

总结：
1、
在这里插入图片描述
2、
在这里插入图片描述
3、
在这里插入图片描述
4、
在这里插入图片描述
5、
在这里插入图片描述
6、
在这里插入图片描述
7、
在这里插入图片描述
8、
在这里插入图片描述
9、void LTDC_Draw_Point(uint16_t x,uint16_t y,uint32_t color)中需要判断x、y是否超出LCD边界，否则会产生硬件错误

smallerlang
关注
  • 0
    点赞
  • 踩
  • 1
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
专栏目录
STM32 LCD横竖屏
Ccode11的专栏
07-31 2878
unsigned short bmp[]={ 0xF800,0xF800,0xF800,0xF800,0xF800,0xF800,0xF800,0xF800,0xF800,0xF800,0xF800,0xF800,0xF800,0xF800,0xF800,0xF800, 0xF800,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
基于STM32F767驱动 LTDC LCD（RGB屏）.7z
07-31
在本项目中，STM32F767被用来驱动一种特殊的LCD——RGBTFT屏，通过LTDC（Layered Transparent Display Controller）控制器来实现。 LTDC是STM32中用于显示控制的高级接口，它可以支持多种类型的LCD面板，包括TFT...
横屏竖屏
weixin_30765475的博客
09-14 103
横屏竖屏 甚至连宽高比的计算都省略了... 设置CSS3(@media)横竖屏样式 //竖屏时使用的样式 @media all and (orientation:portrait) { code here ... } //横屏时使用的样式 @media all and (orientation:landscape) { ...
基于stm32物联网开发板(2)--LCD屏幕
weixin_44453694的博客
05-14 2887
屏幕尺寸为1.3寸，分辨率240*240，颜色格式RGB565，驱动IC：ST7789VW；超大可视角度:大于160°(显示屏中可视角度最大的一种屏幕)；宽电压供电(3V~5V),兼容3.3V和5V电平逻辑,无需电平转换芯片；采用7线制SPI接口；工作温度范围为工业级(-20℃~60℃)；军工级工艺标准,长期稳定工作；
24.STM32的IO口扩展PCF8574
qq_54674051的博客
09-25 5071
24.STM32的IO口扩展PCF8574
【STM32】标准库与HAL库对照学习教程外设篇--蜂鸣器
修成真的博客
11-29 5624
【STM32】标准库与HAL库对照学习教程外设篇--蜂鸣器一、前言二、准备工作三、蜂鸣器简介四、硬件图五、标准库驱动蜂鸣器六、HAL库驱动蜂鸣器 一、前言 本篇文章是对STM32驱动蜂鸣器的讲解，通过原理的简单介绍与工程的配置，能让您快速掌握蜂鸣器的使用。 二、准备工作 STM32开发板（我用的是普中的STM32F103ZE开发板） cubemx软件、keil 5（MDK） 开发板原理图 三、蜂鸣器简介 蜂鸣器是一种一体化结构的电子讯响器，采用直流电压供电。 蜂鸣器在结构上分为：压电式蜂鸣器和电磁式蜂
F429-LTDC显示屏 - 显示屏介绍
嚜嚜的博客
07-28 689
板子配套：               5寸液晶屏               分辨率：800*480     户外选择LED显示屏  ， RGB888 --- RED GREEN BLUE 分别用8个数据位表示 RGB565 --- RED GREEN BLUE 分别用5个数据位,6个数据位,5个数据位表示 ...
STM32F767驱动LTDC LCD（RGB屏）（4.3寸，800X480分辨率）【支持STM32F7单片机_寄存器库驱动】
07-24
STM32F767驱动LTDC LCD（RGB屏）是一项关键的技术任务，在嵌入式系统设计中，尤其是在开发基于STM32F7系列微控制器的项目时，它显得尤为重要。STM32F767是一款高性能、低功耗的微控制器，其强大的ARM Cortex-M7内核...
STM32F767驱动LTDC LCD RGB屏（7寸，1024X600分辨率）【支持STM32F7系列，HAL库驱动】.zip
06-14
总之，STM32F767驱动LTDC LCD RGB屏（7寸，1024X600分辨率）是一个涉及硬件接口配置、LTDC控制器初始化、帧缓冲区管理以及触摸屏驱动的综合项目。通过HAL库，我们可以更高效地进行编程，同时保持代码的清晰和可维护...
STM32H750驱动LTDC LCD RGB屏（7寸，800X480分辨率）【支持STM32H7系列，寄存器驱动】.zip
06-14
总的来说，驱动STM32H750驱动LTDC LCD RGB屏并集成触摸屏是一项复杂的任务，涉及到硬件连接、寄存器配置、数据传输、中断处理等多个环节。这个项目提供的代码应包含了这些关键部分，可以直接编译运行，为开发者提供...
STM32F429驱动LTDC LCD（RGB屏）（4.3寸，800X480分辨率）【支持STM32F4单片机_寄存器库驱动】
07-24
STM32F429驱动LTDC LCD（RGB屏）是一项关键的技术任务，在嵌入式系统开发中，尤其是在设计带有图形界面的设备时至关重要。STM32F429是意法半导体（STMicroelectronics）推出的一款高性能、低功耗的微控制器，属于STM...
嵌入式实时操作系统篇--I2C总线下PCF8574模块
weixin_45935860的博客
05-29 5111
这里写自定义目录标题前言一、pandas是什么？二、使用步骤1.引入库2.读入数据总结欢迎使用Markdown编辑器新的改变功能快捷键合理的创建标题，有助于目录的生成如何改变文本的样式插入链接与图片如何插入一段漂亮的代码片生成一个适合你的列表创建一个表格设定内容居中、居左、居右SmartyPants创建一个自定义列表如何创建一个注脚注释也是必不可少的KaTeX数学公式新的甘特图功能，丰富你的文章UML 图表FLowchart流程图导出与导入导出导入 提示：文章写完后，目录可以自动生成，如何生成可参考右边的帮
【避坑】【白嫖福利】PCF8574驱动程序，IO口驱动程序（本人亲写，国产有坑）
linfengXBB的博客
04-26 1860
废话不多说放程序吧 PCF的C程序 #include"PCF8974.h" #include"intrins.h" #define Write 0x40 #define Read 0x41 unsigned char dat[]={0}; void IIC_Start(void) { CLK = 1; SDA = 1; CLK = 0; SDA = 0; } void IIC_Stop(void) { CLK = 0; SDA = 0; CLK = 1; SDA = 1; }
stm32的LCD屏幕显示+各个模块功能调试
热门推荐
MAYBE的博客
08-02 4万+
从PWM输出实验的工程开始，加入其他各种功能。LCD屏幕显示：一、hardware 其中timer是产生脉冲的。 二、hallib FMC是一个接口，控制SDRAM和LCD 三、#include#include "lcd.h" #include "sdram.h"四、init() SDRAM_Init(); //初始化SDRAM
pcf8574c语言测试程序,单片机加个PCF8574模块，实现IIC方式驱动LCD1602
weixin_29721821的博客
05-17 545
void delay1(uchar x){uchar a,b;for(a=x;a>0;a--)for(b=200;b>0;b--);}void write_com(uchar com) //写命令函数{ uchar com1,com2;com1=com|0x0f;write_add(com1&0xfc);delay1(2);write...
stm32 Cubemx Lwip裸机测试ping不通,不亮灯
weixin_39254821的博客
10-26 3984
本人遇到STM32F767IGTx使用CubeMX ETH_-RMII-LWIP 裸机测试无法正常ping解决方案,且指示灯不亮 使用正点原子STM32F767开发板通过CubeMX 配置ETH-RMII-LWIP 1.原理图 特别注意 ETH_RESET 使用的PD3 正点原理通过pcf8574连接PD3.一定要初始化. 2.时钟配置 3.ETH配置 4.LWIP配置,不使用DHCP...
I2C器件之PCF8574TS调试记录
瞅瞅水的博客
08-25 7110
I2C器件之PCF8574TS调试记录
stm32学习笔记5——RGB屏相对位置计算
weixin_39276221的博客
11-02 610
stm32学习笔记5——RGB屏相对位置计算写在前面1 程序源码2 RGB屏相对位置换算2.1 坐标系换算源码2.2 换算原理总结 写在前面 本来想用电脑画一下这个示意图的，奈何我用电脑画起来太慢了，所以就将凌乱的手图放上来了，啊，实在是对自己无语了。 1 程序源码 RGB屏颜色填充函数LTDC_Color_Fill(u16 sx,u16 sy,u16 ex,u16 ey,u16 *color)如下所示，该函数功能为在指定区域显示特定颜色。 //在指定区域内填充指定颜色块,DMA2D填充 //此函数.
21、stm32使用LTDC驱动LCD
最新发布
qq_36561846的博客
08-11 1353
stm32使用LTDC驱动LCD RGB888
正点原子stm32f429 ltdc
08-01
正点原子STM32F429 LTDSC是一款基于STM32F429芯片设计的开发板。STM32F429是意法半导体公司推出的一款高性能微控制器，具有丰富的外设和较高的运算能力。LTDSC是指该开发板具有LCD接口以及颜色显示控制器。 正点原子STM32F429 LTDSC开发板采用了LTDSC技术，可以方便地连接各种液晶显示器，实现彩色图像的显示。该开发板还集成了丰富的外设接口，如串口、SPI、I2C等，方便开发者连接各种传感器或其他外部设备，实现更丰富的功能。 由于STM32F429芯片强大的性能，结合LTDSC技术和丰富的外设接口，正点原子STM32F429 LTDSC在工业控制、医疗设备、智能家居等领域具有广泛的应用前景。开发者可以利用该开发板进行各种创意和应用的开发，快速实现自己的项目。 正点原子STM32F429 LTDSC还具有良好的软件支持。意法半导体提供了丰富的开发工具和库函数，开发者可以利用它们进行快速开发，减少开发周期。此外，正点原子自身也提供了很多案例和技术支持，帮助开发者解决开发过程中的问题。 总之，正点原子STM32F429 LTDSC是一款功能强大的开发板，可用于快速开发各种应用。它集成了颜色显示控制器和丰富的外设接口，为开发者提供了广泛的应用可能性。同时，它具有良好的软件支持和技术支持，帮助开发者更加高效地进行开发工作。
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值