各位友坚科技开发板的用户,以下是开发板UT-S3C6410 telnet Linux主机的详细设置,应通过初次验证,请大家指教。www.urbetter.com ---------------------------------------------------------------------------------------------------------------------- 3.开发板设置好网络,登录Internet ---设置网关:route add default gw 192.168.1.1(根据实际情况设定) ---确认连通Internet:ping 202.112.17.137 ---设置域名解析服务器: 查看你pc机上的DNS服务器的ip地址 202.96.128.96 vim /etc/resolv.conf 添加 nameserver 202.96.128.96 或者rm /etc/resolv.conf ;touch /etc/resolv.conf; echo nameserver 202.96.128.96 >> /etc/resolv.conf ------------------------------------------------------------- 4.开发板登录Linux主机 4.1Linux主机安装telnet服务 sudo apt-get install xinetd telnetd 修改配置 sudo vi /etc/inetd.conf并加入以下一行 telnet stream tcp nowait telnetd /usr/sbin/tcpd /usr/sbin/in.telnetd 4.2sudo vi /etc/xinetd.conf并加入以下内容: # Simple configuration file for xinetd # # Some defaults, and include /etc/xinetd.d/ defaults { # Please note that you need a log_type line to be able to use log_on_success # and log_on_failure. The default is the following : # log_type = SYSLOG daemon info instances = 60 log_type = SYSLOG authpriv log_on_success = HOST PID log_on_failure = HOST cps = 25 30 } includedir /etc/xinetd.d
开发板UT-S3C6410 telnet Linux主机的详细设置(二)【友坚恒天科技】
最新推荐文章于 2024-07-14 21:53:39 发布