golang自带copy文件功能,但是网上主要是有二种copy的方式,一种是利用系统自带的os.copy
方法,一种是利用系统的read和write方法手动造轮实现copy功能,第三种是利用bufio
的缓冲方式来实现。
最近的一次代码,利用copy方法,数据却死活写不进新文件。。。直到最后才发现是自己没写
defer
,提前把写文件给close()
了,这种低级错误也是醉了,
实际使用的时候可以多种方式混合。举例如下:
//纯粹以手动读写方式实现copy功能
func copyFilebyRW() {
fmt.Println("========拷贝文件============")
c1, err := ioutil.ReadFile("./1.txt")
if err != nil {
fmt.Println("读取错误")
}
err = ioutil.WriteFile("./2.txt", c1, 6044)
if err != nil {
fmt.Println("录入失败")
}
}
//读取,copy到write中
func copyFileOStoOS() {
srcFile, err := os.Open("./1.txt")
defer srcFile.Close()
if err != nil {
fmt.Println("srcfile获取失败")
return
}
dstFile, err := os.OpenFile("./2.txt", os.O_CREATE|os.O_TRUNC|os.O_WRONLY, 0644)
defer dstFile.Close()
if err != nil {
fmt.Println("dstfile获取失败")
return
}
rtn, err := io.Copy(dstFile, srcFile)
if err != nil {
fmt.Println("copy失败")
}
fmt.Println("copy结束:", rtn)
}
//读取缓冲,copy到不缓冲write中
func copyFileBufftoOS() {
srcFile, err := os.Open("./1.txt")
defer srcFile.Close()
if err != nil {
fmt.Println("srcfile获取失败")
return
}
srcBuf := bufio.NewReader(srcFile)
dstFile, err := os.OpenFile("./2.txt", os.O_CREATE|os.O_TRUNC|os.O_WRONLY, 0644)
defer dstFile.Close()
if err != nil {
fmt.Println("dstfile获取失败")
return
}
rtn, err := io.Copy(dstFile, srcBuf)
if err != nil {
fmt.Println("copy失败")
}
fmt.Println("copy结束:", rtn)
}
//读取,copy到缓冲write中
func copyFileOStoBuff() {
srcFile, err := os.Open("./1.txt")
defer srcFile.Close()
if err != nil {
fmt.Println("srcfile获取失败")
return
}
dstFile, err := os.OpenFile("./2.txt", os.O_CREATE|os.O_TRUNC|os.O_WRONLY, 0644)
defer dstFile.Close()
if err != nil {
fmt.Println("dstfile获取失败")
return
}
dstBuf := bufio.NewWriter(dstFile)
rtn, err := io.Copy(dstBuf, srcFile)
if err != nil {
fmt.Println("copy失败")
}
// 进入缓冲后输出,这步骤非常重要,否则虽然read成功了,但write文件为空
dstBuf.Flush()
fmt.Println("copy结束:", rtn)
}
//读取缓冲,copy到缓冲write中
func copyFileBufftoBuff() {
srcFile, err := os.Open("./1.txt")
defer srcFile.Close()
if err != nil {
fmt.Println("srcfile获取失败")
return
}
srcBuf := bufio.NewReader(srcFile)
dstFile, err := os.OpenFile("./2.txt", os.O_CREATE|os.O_TRUNC|os.O_WRONLY, 0644)
defer dstFile.Close()
if err != nil {
fmt.Println("dstfile获取失败")
return
}
dstBuf := bufio.NewWriter(dstFile)
rtn, err := io.Copy(dstBuf, srcBuf)
if err != nil {
fmt.Println("copy失败")
}
// 进入缓冲后输出,这步骤非常重要,否则虽然read成功了,但write文件为空
dstBuf.Flush()
fmt.Println("copy结束:", rtn)
}