SX1276 与SX1278扩频芯片的区别

SEMTECH的SX1276和SX1278扩频芯片在性能上差异不大,主要区别在于针对的频段,SX1278适用于433/470M,而SX1276适用于868/915M。尽管两者封装和引脚定义不兼容,但在相同环境和条件下,采用LoRa扩频模式的APC340模块相比GFSK能实现更远的传输距离。
摘要由CSDN通过智能技术生成


2013SEMTECH首次推出带扩频技术的Sub-GHz产品芯片,由于其相对传统FSKGFSK在传输距离和抗干扰能力方面的优势而倍受市场关注,目前,SEMTECH的扩频芯片SX1276/7/8覆盖了几乎整个Sub-1GHz4个频段:

The aim of this project is to show an example of the endpoint LoRaWAN stack implementation. This project has 3 active branches in place. The master branch which provides the latest released source code (v4.4.2), the develop branch which provides the current source code development status to be released next (Milestone 4.4.3) and the feature/5.0.0 branch which provides a preview of the current source code development status for LoRaWAN Specification v1.1 specification.(Milestone 5.0.0) The master branch implementation is based on LoRaWAN Specification v1.0.3 and LoRaWAN Regional Parameters v1.0.3revA specifications. ClassA, ClassB and ClassC end-device classes are fully implemented. The develop branch implementation is based on LoRaWAN Specification v1.0.3 and LoRaWAN Regional Parameters v1.0.3revA specifications. ClassA, ClassB and ClassC end-device classes are fully implemented. The feature/5.0.0 branch implementation is based on LoRaWAN Specification v1.1 and LoRaWAN Regional Parameters v1.1rB specifications. ClassA, ClassB and ClassC end-device classes are fully implemented. This project also provides SX1272/73, SX1276/77/78/79 and SX1261/2 radio drivers. For each currently supported platform example applications are provided. LoRaMac/classA: ClassA end-device example application. LoRaMac/classB: ClassB end-device example application. LoRaMac/classC: ClassC end-device example application. LoRaMac/fuota-test-01: FUOTA test scenario 01 end-device example application. (Based on provided application common packages) LoRaMac/periodic-uplink-lpp: ClassA/B/C end-device example application. Periodically uplinks a frame using the Cayenne LPP protocol. (Based on provided application common packages) ping-pong: Point to point RF link example application. rx-sensi: Example application useful to measure the radio sensitivity level using an RF generator. tx-cw: Example application to show how to generate an RF Continuous Wave transmission. Note: Each LoRaWAN application example (LoRaMac/classX) includes an implementation of the LoRa-Alliance; LoRaWAN certification protocol. Note: The LoRaWAN stack API documentation can be found at: http://stackforce.github.io/LoRaMac-doc/
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值