19、顺时针打印矩阵 好题,值得再做一遍
输入一个矩阵,按照从外向里以顺时针的顺序依次打印出每一个数字,例如,如果输入如下4 X 4矩阵: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 则依次打印出数字1,2,3,4,8,12,16,15,14,13,9,5,6,7,11,10.
示例1
输入
[[1,2],[3,4]]
返回值
[1,2,4,3]
1、有点难,在力扣上写了好久
主要就是分析清楚上下左右的情况
执行用时:20 ms, 在所有 C++ 提交中击败了87.56%的用户
内存消耗:10 MB, 在所有 C++ 提交中击败了100.00%的用户
执行用时:0 ms, 在所有 C++ 提交中击败了100.00%的用户
内存消耗:6.7 MB, 在所有 C++ 提交中击败了100.00%的用户
vector<int> spiralOrder(vector<vector<int>>& matrix) {
if (matrix.size()==0) return vector<int>();
if (matrix.size() == 1) return matrix[0];
int row = matrix.size(), col = matrix[0].size();
int left = 0, right = 0, top = 0, bottom = 0;
vector<int> result;
while (left + right < col && top + bottom < row) {
for (int i = left; i < col - left - right + left; ++i) {
//cout << matrix[top][i];
result.push_back(matrix[top][i]);
}
top++;
//cout << " top " <<top<<bottom<< endl;
if (top + bottom == row) break;
for (int i = top; i < row - top - bottom + top; ++i) {
//cout << matrix[i][col - right - 1];
result.push_back(matrix[i][col - right - 1]);
}
right++;
//cout << "right"<<left<<right<<endl;
if (left + right == col) break;
for (int i = col-right-1; i >= left ; --i) {
//cout << matrix[row - bottom - 1][i];
result.push_back(matrix[row - bottom - 1][i]);
}
bottom++;
//cout << " bottom " << top << bottom << endl;
if (top + bottom == row) break;
for (int i = row-bottom-1; i >= top; --i) {
//cout << matrix[i][left];
result.push_back(matrix[i][left]);
}
left++;
//cout << "left" << left << right << endl;
}
return result;
}
2、新的写法,这种其实更好理解
执行用时:24 ms, 在所有 C++ 提交中击败了56.85%的用户
内存消耗:10 MB, 在所有 C++ 提交中击败了100.00%的用户
vector<int> spiralOrder(vector<vector<int>>& matrix) {
vector <int> res;
if(matrix.empty()) return res;
int rl = 0, rh = matrix.size()-1; //记录待打印的矩阵上下边缘
int cl = 0, ch = matrix[0].size()-1; //记录待打印的矩阵左右边缘
while(1){
for(int i=cl; i<=ch; i++) res.push_back(matrix[rl][i]);//从左往右
if(++rl > rh) break; //若超出边界,退出
for(int i=rl; i<=rh; i++) res.push_back(matrix[i][ch]);//从上往下
if(--ch < cl) break;
for(int i=ch; i>=cl; i--) res.push_back(matrix[rh][i]);//从右往左
if(--rh < rl) break;
for(int i=rh; i>=rl; i--) res.push_back(matrix[i][cl]);//从下往上
if(++cl > ch) break;
}
return res;
}
3、改进一下第二种写法,快上不少
执行用时:12 ms, 在所有 C++ 提交中击败了98.41%的用户
内存消耗:10.3 MB, 在所有 C++ 提交中击败了100.00%的用户
vector<int> spiralOrder(vector<vector<int>>& matrix) {
vector <int> res;
if (matrix.empty()) return res;
int top = 0, bottom = matrix.size() - 1; //记录待打印的矩阵上下边缘
int left = 0, right = matrix[0].size() - 1; //记录待打印的矩阵左右边缘
while (1) {
for (int i = left; i <= right; ++i) res.push_back(matrix[top][i]);//从左往右
if (++top > bottom) break; //若超出边界,退出
for (int i = top; i <= bottom; ++i) res.push_back(matrix[i][right]);//从上往下
if (--right < left) break;
for (int i = right; i >= left; --i) res.push_back(matrix[bottom][i]);//从右往左
if (--bottom < top) break;
for (int i = bottom; i >= top; --i) res.push_back(matrix[i][left]);//从下往上
if (++left > right) break;
}
return res;
}
二刷:
1、最快的做法,注意中间的判断条件不可少
运行时间:3ms 占用内存:496k
vector<int> printMatrix(vector<vector<int> > matrix) {
if (matrix.size() == 0 || matrix[0].size() == 0) return vector<int>();
int left = 0, right = matrix[0].size() - 1, top = 0, bottom = matrix.size() - 1;
vector<int> result;
while (left <= right && top <= bottom) {
for (int i = left; i <= right; ++i)
{
//cout << matrix[top][i] << " ";
result.push_back(matrix[top][i]);
}
if (++top > bottom) break;
for (int i = top; i <= bottom; ++i)
{
//cout << matrix[i][right] << " ";
result.push_back(matrix[i][right]);
}
if (--right < left) break;
for (int i = right ; i >= left; --i) {
//cout << matrix[bottom][i] << " ";
result.push_back(matrix[bottom][i]);
}
if (--bottom < top) break;
for (int i = bottom; i >= top; --i) {
//cout << matrix[i][left] << " ";
result.push_back(matrix[i][left]);
}
if (++left > right) break;
}
return result;
}
美女帅哥们如果觉得写的还行,有点用的话麻烦点个赞或者留个言支持一下阿秀~
如果觉得狗屁不通,直接留言开喷就完事了。