Arduino I2C 总线扫描仪 基于 i2c_scanner 的 Arduino 改进的 I2C 总线扫描实用程序,来自: ://playground.arduino.cc/Main/I2cScanner 此实用程序旨在复制 Linux i2cdetect 工具的基本功能(熟悉 Raspberry Pi 用户等)
转载自:
#include <Wire.h>
void setup() {
Wire.begin();
Serial.begin(9600);
while (!Serial); //太极创客 www.taichi-maker.com
Serial.println("\nI2C Scanner");
}
void loop() {
int nDevices = 0;
Serial.println("Scanning...");
for (byte address = 1; address < 127; ++address) {
// The i2c_scanner uses the return value of
// the Write.endTransmisstion to see if
// a device did acknowledge to the address.
Wire.beginTransmission(address);
byte error = Wire.endTransmission();
if (error == 0) {
Serial.print("I2C device found at address 0x");
if (address < 16) {
Serial.print("0");
}
Serial.print(address, HEX);
Serial.println(" !");
++nDevices;
} else if (error == 4) {
Serial.print("Unknown error at address 0x");
if (address < 16) {
Serial.print("0");
}
Serial.println(address, HEX);
}
}
if (nDevices == 0) {
Serial.println("No I2C devices found\n");
} else {
Serial.println("done\n");
}
delay(5000); // Wait 5 seconds for next scan
}