在我们的业务中，经常存在需要通过发送验证码、校验验证码来完成的一些业务逻辑，比如账号注册、找回密码、用户身份确认等。
在该类业务中，发送验证码的方式可以有各种各样，比如最常见的手机验证，最古老的邮箱验证，到现在相对少见的微信公众号、钉钉通知等；而验证码服务端存储的方式也可以各式各样，比如存储在关系型数据库中，当然也可以如本文标题所示，存储在Redis中。
既然已经预见到了各式各样的发送方式，也预见到了各式各样的存储方式，所以，虽然本文标题是基于Redis，但Redis其实只是其中的一种存储方式，如果需要，我们也应该可以和方便的切换到其它存储方式。
上代码前，我们先看下设计中的接口关系
ICodeHelper是最终提供发送验证码和校验验证码的最终接口，其关联了ICodeSender和ICodeStorage，ICodeSender即为验证码发送方式的约定接口，ICodeStorage则为验证码服务端持久化方式的约定接口。我们可以看到ICodeSender同样关联了IContentFormatter，因为作为发送方ICodeSender其实是不知道如何将要发送的内容组织成一段完整的文本内容的，这时候就需要IContentFormatter来组织文本内容，至于继承自IContentFormatter的IComplexContentFormatter，则只是IContentFormatter一个容器封装，毕竟对于不同的业务类型，我们需要组织成不同的文本内容，通过IComplexContentFormatter，我们可以将不同业务类型文本内容的组织过程，分散到不同的IContentFormatter中。
下面我们来看下上述接口的规范约定，考虑到代码的简便性，此处我们简单的将receiver接收方定义为了string，而不是泛型<T>；业务标志bizFlag为了方便接入时无需调整代码，所以此处也没有将该值定义为枚举，而是同样定义成了通用性最强的string。
ICodeStorage
/// <summary>
/// 校验码信息存储接口
/// </summary>
public interface ICodeStorage
{
/// <summary>
/// 将校验码进行持久化，如果接收方和业务标志组合已经存在，则进行覆盖
/// </summary>
/// <param name="receiver">接收方</param>
/// <param name="bizFlag">业务标志</param>
/// <param name="code">校验码</param>
/// <param name="effectiveTime">校验码有效时间范围</param>
/// <returns></returns>
Task<bool> SetCode(string receiver, string bizFlag, string code, TimeSpan effectiveTime);
/// <summary>
/// 校验码错误次数+1，如果校验码已过期，则不进行任何操作
/// </summary>
/// <param name="receiver">接收方</param>
/// <param name="bizFlag">业务标志</param>
/// <returns></returns>
Task IncreaseCodeErrors(string receiver, string bizFlag);
/// <summary>
/// 校验码发送次数周期持久化，如果接收方和业务标志组合已经存在，则进行覆盖
/// </summary>
/// <param name="receiver">接收方</param>
/// <param name="bizFlag">业务标志</param>
/// <param name="period">周期时间范围</param>
/// <returns></returns>
Task<bool> SetPeriod(string receiver, string bizFlag, TimeSpan? period);
/// <summary>
/// 校验码周期内发送次数+1，如果周期已到，则不进行任何操作
/// </summary>
/// <param name="receiver">接收方</param>
/// <param name="bizFlag">业务标志</param>
/// <returns></returns>
Task IncreaseSendTimes(string receiver, string bizFlag);
/// <summary>
/// 获取校验码及已尝试错误次数，如果校验码不存在或已过期，则返回null
/// </summary>
/// <param name="receiver">接收方</param>
/// <param name="bizFlag">业务标志</param>
/// <returns></returns>
Task<Tuple<string, int>> GetEffectiveCode(string receiver, string bizFlag);
/// <summary>
/// 获取校验码周期内已发送次数，如果周期已到或未发送过任何验证码，则返回0
/// </summary>
/// <param name="receiver"></param>
/// <param name="bizFlag"></param>
/// <returns></returns>
Task<int> GetAreadySendTimes(string receiver, string bizFlag);
}
ICodeSender，请注意IsSupport方法约定。
/// <summary>
/// 校验码实际发送接口
/// </summary>
public interface ICodeSender
{
/// <summary>
/// 发送校验码内容模板
/// </summary>
IContentFormatter Formatter { get; }
/// <summary>
/// 判断接收者是否符合发送条件，例如当前发送者只支持邮箱，而接收方为手机号，则返回结果应当为false
/// </summary>
/// <param name="receiver">接收方</param>
/// <returns></returns>
bool IsSupport(string receiver);
/// <summary>
/// 发送校验码信息
/// </summary>
/// <param name="receiver">接收方</param>
/// <param name="bizFlag">业务标志</param>
/// <param name="code">校验码</param>
/// <param name="effectiveTime">校验码有效时间范围</param>
/// <returns></returns>
Task<bool> Send(string receiver, string bizFlag, string code, TimeSpan effectiveTime);
}
IContentFormatter
/// <summary>
/// 发送校验码内容模板接口
/// </summary>
public interface IContentFormatter
{
/// <summary>
/// 将指定参数组织成待发送的文本内容
/// </summary>
/// <param name="receiver">接收方</param>
/// <param name="bizFlag">业务标志</param>
/// <param name="code">校验码</param>
/// <param name="effectiveTime">校验码有效时间范围</param>
/// <returns></returns>
string GetContent(string receiver, string bizFlag, string code, TimeSpan effectiveTime);
}
IComplexContentFormatter
/// <summary>
/// 基于业务标志的多内容模板
/// </summary>
public interface IComplexContentFormatter : IContentFormatter
{
/// <summary>
/// 设置指定业务对应的内容模板
/// </summary>
/// <param name="bizFlag">业务标志</param>
/// <param name="formatter">内容模板</param>
void SetFormatter(string bizFlag, IContentFormatter formatter);
/// <summary>
/// 移除指定业务对应的内容模板，如果没有，则返回null
/// </summary>
/// <param name="bizFlag">业务标志</param>
/// <returns></returns>
IContentFormatter RemoveFormatter(string bizFlag);
}
ICodeHelper
/// <summary>
/// 业务校验码辅助接口
/// </summary>
public interface ICodeHelper
{
/// <summary>
/// 校验码实际发送者
/// </summary>
ICodeSender Sender { get; }
/// <summary>
/// 校验码信息存储者
/// </summary>
ICodeStorage Storage { get; }
/// <summary>
/// 发送校验码
/// </summary>
/// <param name="receiver">接收方</param>
/// <param name="bizFlag">业务标志</param>
/// <param name="code">校验码</param>
/// <param name="effectiveTime">校验码有效时间范围</param>
/// <param name="maxSendLimit">周期内最大允许发送配置，为null则表示无限制</param>
/// <returns></returns>
Task<SendResult> SendCode(string receiver, string bizFlag, string code, TimeSpan effectiveTime, PeriodLimit maxSendLimit);
/// <summary>
/// 验证校验码是否正确
/// </summary>
/// <param name="receiver">接收方</param>
/// <param name="bizFlag">业务标志</param>
/// <param name="code">校验码</param>
/// <param name="maxErrorLimit">最大允许错误次数</param>
/// <returns></returns>
Task<VerificationResult> VerifyCode(string receiver, string bizFlag, string code, int maxErrorLimit);
}
下面则是接口约定中的一些定义的类和枚举。
/// <summary>
/// 校验码发送周期设置
/// </summary>
public class PeriodLimit
{
/// <summary>
/// 周期内允许的最大次数
/// </summary>
public int MaxLimit { get; set; }
/// <summary>
/// 周期时间，如果不设置，则表示无周期，此时<see cref="MaxLimit"/>代表总共只允许发送多少次
/// </summary>
public TimeSpan? Period { get; set; }
}
/// <summary>
/// 校验码发送结果
/// </summary>
public enum SendResult
{
/// <summary>
/// 发送成功
/// </summary>
[Description("成功")]
Success = 0,
/// <summary>
/// 超出最大发送次数
/// </summary>
[Description("超出最大发送次数")]
MaxSendLimit = 11,
/// <summary>
/// 发送失败，指<see cref="ICodeSender"/>的发送结果为false
/// </summary>
[Description("发送失败")]
FailInSend = 12,
/// <summary>
/// 无法发送，<see cref="ICodeSender.IsSupport(string)"/>结果为false
/// </summary>
[Description("无法发送")]
NotSupprot = 13,
}
/// <summary>
/// 校验码校验结果
/// </summary>
public enum VerificationResult
{
/// <summary>
/// 校验成功
/// </summary>
[Description("成功")]
Success = 0,
/// <summary>
/// 校验码已过期
/// </summary>
[Description("校验码已过期")]
Expired = 31,
/// <summary>
/// 校验码不一致，校验失败
/// </summary>
[Description("校验失败")]
VerificationFailed = 32,
/// <summary>
/// 已经达到了最大错误尝试次数，需重新发送新的校验码
/// </summary>
[Description("超出最大错误次数")]
MaxErrorLimit = 33,
}
再下来就是具体的接口实现了，当然这些实现也是通用实现
ContentFormatter
/// <summary>
/// 通用的内容模板
/// </summary>
public class ContentFormatter : IContentFormatter
{
private Func<string, string, string, TimeSpan, string> _func;
/// <summary>
/// 通用实现，这样就无需每种业务类型都要实现<see cref="IContentFormatter"/>
/// </summary>
/// <param name="func">传递的委托，参数顺序与<see cref="GetContent(string, string, string, TimeSpan)"/>一致</param>
public ContentFormatter(Func<string, string, string, TimeSpan, string> func)
{
this._func = func ?? throw new ArgumentNullException(nameof(func));
}
/// <summary>
/// 将指定参数组织成待发送的文本内容
/// </summary>
/// <param name="receiver">接收方</param>
/// <param name="bizFlag">业务标志</param>
/// <param name="code">校验码</param>
/// <param name="effectiveTime">校验码有效时间范围</param>
/// <returns></returns>
public string GetContent(string receiver, string bizFlag, string code, TimeSpan effectiveTime)
{
return this._func.Invoke(receiver, bizFlag, code, effectiveTime);
}
}
ComplexContentFormatter
using System.Collections.Concurrent;
/// <summary>
/// 基于业务标志的多内容模板实现
/// </summary>
public class ComplexContentFormatter : IComplexContentFormatter
{
private ConcurrentDictionary<string, IContentFormatter> _dic = new ConcurrentDictionary<string, IContentFormatter>();
/// <summary>
/// 设置指定业务对应的内容模板
/// </summary>
/// <param name="bizFlag">业务标志</param>
/// <param name="formatter">内容模板</param>
public void SetFormatter(string bizFlag, IContentFormatter formatter)
{
if (!string.IsNullOrWhiteSpace(bizFlag) && formatter != null)
{
this._dic.AddOrUpdate(bizFlag, formatter, (k, v) => formatter);
}
}
/// <summary>
/// 移除指定业务对应的内容模板，如果没有，则返回null
/// </summary>
/// <param name="bizFlag">业务标志</param>
/// <returns></returns>
public IContentFormatter RemoveFormatter(string bizFlag)
{
if (!string.IsNullOrWhiteSpace(bizFlag)
&& this._dic.TryRemove(bizFlag, out IContentFormatter formatter))
{
return formatter;
}
return null;
}
/// <summary>
/// 将指定参数组织成待发送的文本内容
/// </summary>
/// <param name="receiver">接收方</param>
/// <param name="bizFlag">业务标志</param>
/// <param name="code">校验码</param>
/// <param name="effectiveTime">校验码有效时间范围</param>
/// <returns></returns>
public string GetContent(string receiver, string bizFlag, string code, TimeSpan effectiveTime)
{
if (string.IsNullOrWhiteSpace(bizFlag))
{
throw new ArgumentNullException(nameof(bizFlag));
}
this._dic.TryGetValue(bizFlag, out IContentFormatter formatter);
if (formatter == null)
{
throw new KeyNotFoundException(nameof(formatter));
}
return formatter.GetContent(receiver, bizFlag, code, effectiveTime);
}
}
CodeHelper，注意该类除了实现ICodeHelper外，还提供了一个用于生成随机验证码的静态方法GetRandomNumber。
/// <summary>
/// 业务校验码辅助接口实现
/// </summary>
public class CodeHelper : ICodeHelper
{
/// <summary>
/// 基于接口实现，可依赖注入
/// </summary>
/// <param name="sender"></param>
/// <param name="storage"></param>
public CodeHelper(ICodeSender sender, ICodeStorage storage)
{
this.Sender = sender ?? throw new ArgumentNullException(nameof(sender));
this.Storage = storage ?? throw new ArgumentNullException(nameof(storage));
}
/// <summary>
/// 校验码实际发送者
/// </summary>
public ICodeSender Sender { get; }
/// <summary>
/// 校验码信息存储者
/// </summary>
public ICodeStorage Storage { get; }
/// <summary>
/// 发送校验码
/// </summary>
/// <param name="receiver">接收方</param>
/// <param name="bizFlag">业务标志</param>
/// <param name="code">校验码</param>
/// <param name="effectiveTime">校验码有效时间范围</param>
/// <param name="maxSendLimit">周期内最大允许发送配置，为null则表示无限制</param>
public async Task<SendResult> SendCode(string receiver, string bizFlag, string code, TimeSpan effectiveTime, PeriodLimit maxSendLimit)
{
var result = SendResult.NotSupprot;
if (this.Sender.IsSupport(receiver))
{
result = SendResult.MaxSendLimit;
bool canSend = maxSendLimit == null;
int sendTimes = 0;
if (!canSend)
{
sendTimes = await this.Storage.GetAreadySendTimes(receiver, bizFlag).ConfigureAwait(false);
canSend = sendTimes < maxSendLimit.MaxLimit;
}
if (canSend)
{
result = SendResult.FailInSend;
if (await this.Sender.Send(receiver, bizFlag, code, effectiveTime).ConfigureAwait(false)
&& await this.Storage.SetCode(receiver, bizFlag, code, effectiveTime).ConfigureAwait(false))
{
result = SendResult.Success;
if (maxSendLimit != null)
{
if (sendTimes == 0)
{
await this.Storage.SetPeriod(receiver, bizFlag, maxSendLimit.Period).ConfigureAwait(false);
}
else
{
await this.Storage.IncreaseSendTimes(receiver, bizFlag).ConfigureAwait(false);
}
}
}
}
}
return result;
}
/// <summary>
/// 验证校验码是否正确
/// </summary>
/// <param name="receiver">接收方</param>
/// <param name="bizFlag">业务标志</param>
/// <param name="code">校验码</param>
/// <param name="maxErrorLimit">最大允许错误次数</param>
/// <returns></returns>
public async Task<VerificationResult> VerifyCode(string receiver, string bizFlag, string code, int maxErrorLimit)
{
var result = VerificationResult.Expired;
var vCode = await this.Storage.GetEffectiveCode(receiver, bizFlag).ConfigureAwait(false);
if (vCode != null && !string.IsNullOrWhiteSpace(vCode.Item1))
{
result = VerificationResult.MaxErrorLimit;
if (vCode.Item2 < maxErrorLimit)
{
result = VerificationResult.Success;
if (!string.Equals(vCode.Item1, code, StringComparison.OrdinalIgnoreCase))
{
result = VerificationResult.VerificationFailed;
await this.Storage.IncreaseCodeErrors(receiver, bizFlag).ConfigureAwait(false);
}
}
}
return result;
}
/// <summary>
/// 获取由数字组成的校验码
/// </summary>
/// <param name="maxLength">校验码长度</param>
/// <returns></returns>
public static string GetRandomNumber(int maxLength = 6)
{
if (maxLength <= 0 || maxLength >= 10)
{
throw new ArgumentOutOfRangeException($"{nameof(maxLength)} must between {1} and {9}.");
}
var rd = Math.Abs(Guid.NewGuid().GetHashCode());
var tmpX = (int)Math.Pow(10, maxLength);
return (rd % tmpX).ToString().PadLeft(maxLength, '0');
}
}
除了上述标准通用实现，还有一些半通用实现，比如本文标题中的Redis，所谓半通用，就是指你可以直接拿来用，但有可能不符合你的技术场景，此时你需要自己重写一份。
CodeStorageWithRedisCache，注意该类库采用了StackExchange.Redis.Extensions.Core，你可以在nuget上下载该类库，如果你对默认的Redis键值生成方式不满意，你也可以通过重写GetKey方法来指定新的键值生成方式。当然，因为实际存储在Redis中的数据都只是一些简单数据，并不需要额外的序列化过程，实际你也可以直接使用StackExchange.Redis。
/// <summary>
/// 校验码信息存储到Redis
/// </summary>
public class CodeStorageWithRedisCache : ICodeStorage
{
private readonly IRedisCacheClient _client;
private const string CodeValueHashKey = "Code";
private const string CodeErrorHashKey = "Error";
private const string PeriodHashKey = "Period";
/// <summary>
/// Code缓存Key值前缀
/// </summary>
public string CodeKeyPrefix { get; set; } = "CC";
/// <summary>
/// Period缓存Key值前缀
/// </summary>
public string PeriodKeyPrefix { get; set; } = "CCT";
/// <summary>
/// 缓存写入Redis哪个库
/// </summary>
public int DbNumber { get; set; } = 8;
/// <summary>
/// 基于RedisCacheClient的构造函数
/// </summary>
/// <param name="client"></param>
public CodeStorageWithRedisCache(IRedisCacheClient client)
{
this._client = client;
}
/// <summary>
/// 获取校验码周期内已发送次数，如果周期已到或未发送过任何验证码，则返回0
/// </summary>
/// <param name="receiver"></param>
/// <param name="bizFlag"></param>
/// <returns></returns>
public async Task<int> GetAreadySendTimes(string receiver, string bizFlag)
{
var db = this.GetDatabase();
var key = this.GetPeriodKey(receiver, bizFlag);
var times = await db.HashGetAsync<int>(key, PeriodHashKey).ConfigureAwait(false);
#if DEBUG
Console.WriteLine("Method:{0} Result:{1}", nameof(GetAreadySendTimes), times);
#endif
return times;
}
/// <summary>
/// 获取校验码及已尝试错误次数，如果校验码不存在或已过期，则返回null
/// </summary>
/// <param name="receiver">接收方</param>
/// <param name="bizFlag">业务标志</param>
/// <returns></returns>
public async Task<Tuple<string, int>> GetEffectiveCode(string receiver, string bizFlag)
{
var db = this.GetDatabase();
var key = this.GetCodeKey(receiver, bizFlag);
if (await db.ExistsAsync(key).ConfigureAwait(false))
{
var code = await db.HashGetAsync<string>(key, CodeValueHashKey).ConfigureAwait(false);
var errors = await db.HashGetAsync<int>(key, CodeErrorHashKey).ConfigureAwait(false);
#if DEBUG
Console.WriteLine("Method:{0} Result: Code {1} Errors {2} ", nameof(GetEffectiveCode), code, errors);
#endif
return Tuple.Create(code, errors);
}
return null;
}
/// <summary>
/// 校验码错误次数+1，如果校验码已过期，则不进行任何操作
/// </summary>
/// <param name="receiver">接收方</param>
/// <param name="bizFlag">业务标志</param>
/// <returns></returns>
public async Task IncreaseCodeErrors(string receiver, string bizFlag)
{
var db = this.GetDatabase();
var key = this.GetCodeKey(receiver, bizFlag);
if (await db.ExistsAsync(key).ConfigureAwait(false))
{
var errors = await db.HashGetAsync<int>(key, CodeErrorHashKey).ConfigureAwait(false);
await db.HashSetAsync(key, CodeErrorHashKey, errors + 1).ConfigureAwait(false);
}
}
/// <summary>
/// 校验码周期内发送次数+1，如果周期已到，则不进行任何操作
/// </summary>
/// <param name="receiver">接收方</param>
/// <param name="bizFlag">业务标志</param>
/// <returns></returns>
public async Task IncreaseSendTimes(string receiver, string bizFlag)
{
var db = this.GetDatabase();
var key = this.GetPeriodKey(receiver, bizFlag);
if (await db.ExistsAsync(key).ConfigureAwait(false))
{
var times = await db.HashGetAsync<int>(key, PeriodHashKey).ConfigureAwait(false);
await db.HashSetAsync(key, PeriodHashKey, times + 1).ConfigureAwait(false);
}
}
/// <summary>
/// 将校验码进行持久化，如果接收方和业务标志组合已经存在，则进行覆盖
/// </summary>
/// <param name="receiver">接收方</param>
/// <param name="bizFlag">业务标志</param>
/// <param name="code">校验码</param>
/// <param name="effectiveTime">校验码有效时间范围</param>
/// <returns></returns>
public async Task<bool> SetCode(string receiver, string bizFlag, string code, TimeSpan effectiveTime)
{
var db = this.GetDatabase();
var key = this.GetCodeKey(receiver, bizFlag);
await db.RemoveAsync(key).ConfigureAwait(false);
var ret = await db.HashSetAsync(key, CodeValueHashKey, code).ConfigureAwait(false)
&& await db.HashSetAsync(key, CodeErrorHashKey, 0).ConfigureAwait(false)
&& await db.UpdateExpiryAsync(key, effectiveTime);
#if DEBUG
Console.WriteLine("Method:{0} Result:{1}", nameof(SetCode), ret);
#endif
return ret;
}
/// <summary>
/// 校验码发送次数周期持久化，如果接收方和业务标志组合已经存在，则进行覆盖
/// </summary>
/// <param name="receiver">接收方</param>
/// <param name="bizFlag">业务标志</param>
/// <param name="period">周期时间范围</param>
/// <returns></returns>
public async Task<bool> SetPeriod(string receiver, string bizFlag, TimeSpan? period)
{
var db = this.GetDatabase();
var key = this.GetPeriodKey(receiver, bizFlag);
await db.RemoveAsync(key).ConfigureAwait(false);
var ret = await db.HashSetAsync(key, PeriodHashKey, 1).ConfigureAwait(false);
if (period.HasValue)
{
ret = ret && await db.UpdateExpiryAsync(key, period.Value);
}
#if DEBUG
Console.WriteLine("Method:{0} Result:{1}", nameof(SetPeriod), ret);
#endif
return ret;
}
/// <summary>
/// 组织Redis键值
/// </summary>
/// <param name="receiver"></param>
/// <param name="bizFlag"></param>
/// <param name="prefix"></param>
/// <returns></returns>
protected virtual string GetKey(string receiver, string bizFlag, string prefix)
{
return string.Format("{0}:{1}:{2}", prefix, bizFlag, receiver);
}
private string GetPeriodKey(string receiver, string bizFlag)
{
return this.GetKey(receiver, bizFlag, this.PeriodKeyPrefix);
}
private string GetCodeKey(string receiver, string bizFlag)
{
return this.GetKey(receiver, bizFlag, this.CodeKeyPrefix);
}
private IRedisDatabase GetDatabase()
{
return this._client.GetDb(this.DbNumber);
}
}
最后，就是不可能通用的实现了，对于ICodeSender而言，先不说发送方式不同，就算相同，比如都是手机，那也还有不同的短信供应商，所以此处必须要使用者按自己的实际业务来实现，为了方便举例，这里我写了一个在控制台输出验证码内容的实现。
ConsoleSender，注意IsSupport在此处输出true，代表支持任意receiver
/// <summary>
/// 在控制台输出校验码
/// </summary>
public class ConsoleSender : ICodeSender
{
public ConsoleSender(IContentFormatter formatter)
{
this.Formatter = formatter ?? throw new ArgumentNullException(nameof(formatter));
}
public IContentFormatter Formatter { get; }
public bool IsSupport(string receiver) => true;
public Task<bool> Send(string receiver, string bizFlag, string code, TimeSpan effectiveTime)
{
var content = this.Formatter.GetContent(receiver, bizFlag, code, effectiveTime);
Console.WriteLine("发送内容：{0}", content);
return Task.FromResult(true);
}
}
最后则是如何使用的代码例子，注意此处Redis序列化方式采用了StackExchange.Redis.Extensions.Newtonsoft，你可以根据实际需要采用其它序列化方式，比如StackExchange.Redis.Extensions.Protobuf等，你同样可以在nuget上下载到这些类库。
static void CheckCodeHelperDemo()
{
var redisConfig = new RedisConfiguration
{
Hosts = new RedisHost[] {
new RedisHost{
Host="127.0.0.1",
Port=6379
}
}
};
var bizFlag = "forgetPassword";
var receiver = "Receiver";
var effectiveTime = TimeSpan.FromMinutes(1);
var redisManager = new RedisCacheConnectionPoolManager(redisConfig);
var redisClient = new RedisCacheClient(redisManager,
new NewtonsoftSerializer(), redisConfig);//new ProtobufSerializer();
var storage = new CodeStorageWithRedisCache(redisClient);
var simpleFormatter = new ContentFormatter(
(r, b, c, e) => $"{r}您好，您的忘记密码验证码为{c}，有效期为{(int)e.TotalSeconds}秒.");
var formatter = new ComplexContentFormatter();
formatter.SetFormatter(bizFlag, simpleFormatter);
var sender = new ConsoleSender(formatter); //如果就一个业务场景，也可以直接用simpleFormatter
//var tmp = storage.SetPeriod(receiver, bizFlag, TimeSpan.FromMinutes(20)).Result;
var helper = new CodeHelper(sender, storage);
var code = CodeHelper.GetRandomNumber();
var sendResult = helper.SendCode(receiver, bizFlag, code, effectiveTime, new PeriodLimit
{
MaxLimit = 5,
Period = TimeSpan.FromMinutes(20)
}).Result;
Console.WriteLine("发送结果：{0}", sendResult);
if (sendResult == SendResult.Success)
{
Console.WriteLine("*****************************");
while (true)
{
Console.WriteLine("请输入校验码：");
var vCode = Console.ReadLine();
var vResult = helper.VerifyCode(receiver, bizFlag, vCode, 3).Result;
Console.WriteLine("校验码 {0} 校验结果：{1}", vCode, vResult);
if (vResult != VerificationResult.VerificationFailed)
{
break;
}
}
}
redisManager.Dispose();
}
最后则是不同测试场景的一些截图
- 验证码校验失败达到允许次数上限
- 校验码已过期
- 校验码验证成功
- 校验码周期内允许的发送次数已达到上限
最后，上述完整的代码可见github。
扫一扫
1703
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
