root@rt3# show
version 6.3R3.1;
system {
host-name rt3;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 10.2.2.1/24;
}
}
}
fxp1 {
speed 10m;
link-mode half-duplex;
unit 0 {
family inet {
address 10.3.3.1/24;
}
}
}
lo0 {
unit 0 {
family inet {
address 172.16.1.1/32;
}
}
}
}
routing-options {
static {
route 10.7.7.0/24 reject;
//相当于cisco的
juniper路由器的rip配置示例
最新推荐文章于 2013-10-08 07:45:29 发布
本文档展示了如何在Juniper路由器上配置RIP协议,包括接口设置、静态路由、邻居宣告以及策略定义,帮助理解Juniper与Cisco在RIP配置上的差异。
摘要由CSDN通过智能技术生成