Miracast（二）wpa_supplicant的移植和使用

一、libnl移植

1、tar zxvf libnl-1.1.4.tar.gz

2、cd libnl-1.1.4

3、mkdir install

4、./configure --prefix=$(pwd)/install --enable-shared --enable-static

5、make CC=/opt/prebuilts/gcc/linux-x86/aarch64/gcc-linaro-6.3.1-2017.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc

6、make install

二、openssl移植

1、cd openssl-1.1.0j

2、mkdir install

3、./config no-asm shared --prefix=$(pwd)/install

4、修改Makefile：

 

CC= /home/public/zx902/arm-linux-gnueabi/bin/arm-linux-gnueabi-gcc

 

删除 CFLAG= 中的-m64

删除 LIB_LDFLAGS= 中的-m64

 

AR= /home/public/zx902/arm-linux-gnueabi/bin/arm-linux-gnueabi-ar $(ARFLAGS) r

 

RANLIB= /home/public/zx902/arm-linux-gnueabi/bin/arm-linux-gnueabi-ranlib

 

NM= /home/public/zx902/arm-linux-gnueabi/bin/arm-linux-gnueabi-nm

 

SHARED_LDFLAGS=

5、make

6、make install

三、wpa_supplicant移植

1、tar -zxvf wpa_supplicant-2.6.tar.gz

2、cd wpa_supplicant-2.6/wpa_supplicant/

3、cp defconfig .config

4、修改.config

增加

CONFIG_P2P=y

CONFIG_WIFI_DISPLAY=y

5、修改Makefile

增加下面4项

6、make CC=/opt/prebuilts/gcc/linux-x86/aarch64/gcc-linaro-6.3.1-2017.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc

提示错误：

方法：修改.config
CONFIG_NO_WPA_PASSPHRASE=y

 

 

 

 

 

Wpa_supplicant说明：

一、两个p2p设备，互相没有连接记录：

1、启动wpa_cli---------./wpa_cli -ip2p-dev-wlan0，注意p2p-dev-wlan0在/var/run/wpa_supplicant/下

2、设置wifi p2p

set config_methods 80        设置wps模式为pushbutton

3、搜索设备，手机端也要进行搜索:

p2p_find

搜索结果：

<3>P2P-DEVICE-FOUND 3e:cd:5d:eb:4a:ab p2p_dev_addr=3e:cd:5d:eb:4a:ab pri_dev_type=10-0050F204-5 name='HUAWEI Mate 10' config_methods=0x188 dev_capab=0x25 group_capab=0x0 vendor_elems=1 new=0

4、(1)开发板连接手机：

p2p_connect 3e:cd:5d:eb:4a:ab pbc

手机端跳出是否连接，选择连接

<3>P2P-GO-NEG-SUCCESS role=client freq=5765 ht40=0 peer_dev=3e:cd:5d:eb:4a:ab peer_iface=3e:cd:5d:eb:ca:ab wps_method=PBC

<3>P2P-GROUP-FORMATION-SUCCESS

<3>P2P-GROUP-STARTED p2p-wlan0-0 client ssid="DIRECT-YG-HUAWEI Mate 10 " freq=5765 psk=1bba787373289e71faf7a73a03bc85bef3839eb6f1432be3761ddd307eb75fda go_dev_addr=3e:cd:5d:eb:4a:ab [PERSISTENT]

(2)手机连接开发板

wps_pbc 3e:cd:5d:eb:4a:ab

p2p_connect 3e:cd:5d:eb:4a:ab pbc

<3>P2P-GO-NEG-SUCCESS role=client freq=5765 ht40=0 peer_dev=3e:cd:5d:eb:4a:ab peer_iface=3e:cd:5d:eb:ca:ab wps_method=PBC

<3>P2P-GROUP-FORMATION-SUCCESS

<3>P2P-GROUP-STARTED p2p-wlan0-0 client ssid="DIRECT-f4-HUAWEI Mate 10 " freq=5765 psk=47bf878f77f8ab01beb9583d7272f0c43b79b80aeeaa8d4440260cb67a945578 go_dev_addr=3e:cd:5d:eb:4a:ab [PERSISTENT]

5、断开连接

（1）手机断开连接

<3>P2P-GROUP-REMOVED p2p-wlan0-0 client reason=GO_ENDING_SESSION

（2）开发板断开连接

p2p_group_remove p2p-wlan0-0

<3>P2P-GROUP-REMOVED p2p-wlan0-0 client reason=REQUESTED

二、手机和开发板都有连接记录

1、检测是否存在连接记录

List_network

2、收到连接请求时，直接调用

p2p_invite persistent=1 peer=3e:cd:5d:eb:4a:ab

log：

<3>P2P-INVITATION-RESULT status=0 3e:cd:5d:eb:ca:ab

<3>P2P-GROUP-STARTED p2p-wlan0-7 client ssid="DIRECT-sJ-HUAWEI Mate 10 " freq=5785 psk=572a48088ce2453edbe0ba5672187f954ac2eb6b64e459b15d7490deaef7c36f go_dev_addr=3e:cd:5d:eb:4a:ab [PERSISTENT]