rtt下的adbd使用

最新推荐文章于 2024-05-12 22:10:28 发布
最新推荐文章于 2024-05-12 22:10:28 发布
阅读量2k 收藏
点赞数 1
分类专栏： rt-thread 文章标签： rt-thread  adbd
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/sundm75/article/details/88917201
版权

RTT 下的ADBD使用

1.引言

调试柿饼时，需要文件传输，由于智龙平台的RTT环境下USB还没有调试好。这里就使用ADB进行文件传输。
找到了何元杰的帖子，并参考 rdb 建立 RTT与PC 的文件传输通道 。

2. 使用环境

2.1 硬件平台

智龙开发板V3.4，128M Flash 32M RAM。

2.2 软件平台

RT-Thread 4.0.0 。

3.使用方法

3.1 网络配置

  • 使用env和pkgs 配置网络组件
    按照 龙芯RTT教程 21.1 配置 网络组件，需要选中以下网络选项：
	[*] Enable lwIP stack
		lwIP version (lwIP v1.4.1)  --->
  • 使用env配置网络SAL组件
    按照 龙芯RTT教程 21.2 配置 SAL组件
	-*- Enable socket abstraction layer
	protocol stack implement  --->
		[*] Support lwIP stack
	-*-   Enable BSD socket operated by file system API
	(4)   the maximum number of protocol families
  • 使用env配置文件系统选项
	
	[*]   Enable elm-chan fatfs
		  elm-chan's FatFs, Generic FAT Filesystem Module  --->
	 -*-   Using devfs for device objects

3.2 ADBD配置

  • 使用env配置网络ADBD组件
RT-Thread online packages  --->
     tools packages  --->
	  [*] ADBD: Android Debug Bridge daemon implementation in RT-Thread  ---
         [*]   Using TCPIP transfer                                              
         [ ]   Using USB transfer                                                
         (1280) Set transfer thread stack size                                   
         [*]   Enable Shell service                                              
         -*-   Enable File service                                               
         (2304)  Set file service thread stack size                              
         (2000)  Set file service receive timeout(ms)                            
         [*]   Enable external MOD                                               
         [*]     Enable File SYNC Mod                                            
         [*]     Enable File LIST Mod  --->                                      
               Version (latest)  --->

3.3 测试过程

在env环境中直接使用adb 命令进行 push 和 pull 测试。这里有2个设备，智龙开发板为一端，PC机为一端。

智龙开发板建立文件夹：board， 该 文件夹下有board文件，该文件内容为： This is board file. 如图1示。
图1 开发板上board文件

PC机建立文件夹：pc， 该 文件夹下有 PC 文件，该文件内容为： This is pc file. 如图2示。
图2 PC机上的pc文件

在 env 中配置好后，编译下载到开发板。开发板启动后，在串口助手中用 ifconfig 检查开发板的IP的地址为 193.169.2.230；在PC上的 env 环境中，用 ping 指令检查能 ping 通开发板。如图3所示。
图3 开发板与PC机网络互通

建立连接：

adb connect 193.169.2.230

将开发板上的文件夹拉到 PC 机上：

adb pull /board board

将PC机上文件夹推到开发板上：

adb push pc /pc

PC机上的命令操作如图4所示。

图4 env命令pull和push

文件传到开发板上如图5所示。

图5 开发板中pc文件和board文件

adb --help命令查看帮助。

file transfer:
 push [--sync] LOCAL... REMOTE
     copy local files/directories to device
     --sync: only push files that are newer on the host than the device
 pull [-a] REMOTE... LOCAL
     copy files/dirs from device
     -a: preserve file timestamp and mode
 sync [all|data|odm|oem|product|system|vendor]
     sync a local build from $ANDROID_PRODUCT_OUT to the device (default all)
     -l: list but don't copy

图6 adbhelp

最后附上已经配置好网络、SAL、ADB的config文件：

#
# Automatically generated file; DO NOT EDIT.
# RT-Thread Configuration
#

#
# RT-Thread Kernel
#
CONFIG_RT_NAME_MAX=10
# CONFIG_RT_USING_SMP is not set
CONFIG_RT_ALIGN_SIZE=8
# CONFIG_RT_THREAD_PRIORITY_8 is not set
CONFIG_RT_THREAD_PRIORITY_32=y
# CONFIG_RT_THREAD_PRIORITY_256 is not set
CONFIG_RT_THREAD_PRIORITY_MAX=32
CONFIG_RT_TICK_PER_SECOND=1000
CONFIG_RT_USING_OVERFLOW_CHECK=y
CONFIG_RT_USING_HOOK=y
CONFIG_RT_USING_IDLE_HOOK=y
CONFIG_RT_IDEL_HOOK_LIST_SIZE=4
CONFIG_IDLE_THREAD_STACK_SIZE=1024
# CONFIG_RT_USING_TIMER_SOFT is not set
CONFIG_RT_DEBUG=y
# CONFIG_RT_DEBUG_INIT_CONFIG is not set
# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
# CONFIG_RT_DEBUG_IPC_CONFIG is not set
# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
# CONFIG_RT_DEBUG_MEM_CONFIG is not set
# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
# CONFIG_RT_DEBUG_MODULE_CONFIG is not set

#
# Inter-Thread communication
#
CONFIG_RT_USING_SEMAPHORE=y
CONFIG_RT_USING_MUTEX=y
CONFIG_RT_USING_EVENT=y
CONFIG_RT_USING_MAILBOX=y
CONFIG_RT_USING_MESSAGEQUEUE=y
CONFIG_RT_USING_SIGNALS=y

#
# Memory Management
#
CONFIG_RT_USING_MEMPOOL=y
CONFIG_RT_USING_MEMHEAP=y
# CONFIG_RT_USING_NOHEAP is not set
CONFIG_RT_USING_SMALL_MEM=y
# CONFIG_RT_USING_SLAB is not set
# CONFIG_RT_USING_MEMHEAP_AS_HEAP is not set
# CONFIG_RT_USING_MEMTRACE is not set
CONFIG_RT_USING_HEAP=y

#
# Kernel Device Object
#
CONFIG_RT_USING_DEVICE=y
# CONFIG_RT_USING_DEVICE_OPS is not set
CONFIG_RT_USING_INTERRUPT_INFO=y
CONFIG_RT_USING_CONSOLE=y
CONFIG_RT_CONSOLEBUF_SIZE=128
CONFIG_RT_CONSOLE_DEVICE_NAME="uart2"
CONFIG_RT_VER_NUM=0x40000
# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set

#
# RT-Thread Components
#
CONFIG_RT_USING_COMPONENTS_INIT=y
CONFIG_RT_USING_USER_MAIN=y
CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
CONFIG_RT_MAIN_THREAD_PRIORITY=10

#
# C++ features
#
# CONFIG_RT_USING_CPLUSPLUS is not set

#
# Command shell
#
CONFIG_RT_USING_FINSH=y
CONFIG_FINSH_THREAD_NAME="tshell"
CONFIG_FINSH_USING_HISTORY=y
CONFIG_FINSH_HISTORY_LINES=5
CONFIG_FINSH_USING_SYMTAB=y
CONFIG_FINSH_USING_DESCRIPTION=y
# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
CONFIG_FINSH_THREAD_PRIORITY=20
CONFIG_FINSH_THREAD_STACK_SIZE=4096
CONFIG_FINSH_CMD_SIZE=80
# CONFIG_FINSH_USING_AUTH is not set
CONFIG_FINSH_USING_MSH=y
CONFIG_FINSH_USING_MSH_DEFAULT=y
# CONFIG_FINSH_USING_MSH_ONLY is not set
CONFIG_FINSH_ARG_MAX=10

#
# Device virtual file system
#
CONFIG_RT_USING_DFS=y
CONFIG_DFS_USING_WORKDIR=y
CONFIG_DFS_FILESYSTEMS_MAX=2
CONFIG_DFS_FILESYSTEM_TYPES_MAX=6
CONFIG_DFS_FD_MAX=32
# CONFIG_RT_USING_DFS_MNTTABLE is not set
CONFIG_RT_USING_DFS_ELMFAT=y

#
# elm-chan's FatFs, Generic FAT Filesystem Module
#
CONFIG_RT_DFS_ELM_CODE_PAGE=936
CONFIG_RT_DFS_ELM_WORD_ACCESS=y
CONFIG_RT_DFS_ELM_USE_LFN_0=y
# CONFIG_RT_DFS_ELM_USE_LFN_1 is not set
# CONFIG_RT_DFS_ELM_USE_LFN_2 is not set
# CONFIG_RT_DFS_ELM_USE_LFN_3 is not set
CONFIG_RT_DFS_ELM_USE_LFN=0
CONFIG_RT_DFS_ELM_MAX_LFN=64
CONFIG_RT_DFS_ELM_DRIVES=2
CONFIG_RT_DFS_ELM_MAX_SECTOR_SIZE=512
# CONFIG_RT_DFS_ELM_USE_ERASE is not set
CONFIG_RT_DFS_ELM_REENTRANT=y
CONFIG_RT_USING_DFS_DEVFS=y
# CONFIG_RT_USING_DFS_ROMFS is not set
# CONFIG_RT_USING_DFS_RAMFS is not set
# CONFIG_RT_USING_DFS_UFFS is not set
# CONFIG_RT_USING_DFS_JFFS2 is not set
# CONFIG_RT_USING_DFS_NFS is not set

#
# Device Drivers
#
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y
CONFIG_RT_USING_CAN=y
CONFIG_RT_CAN_USING_HDR=y
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
CONFIG_RT_USING_I2C=y
# CONFIG_RT_USING_I2C_BITOPS is not set
CONFIG_RT_USING_PIN=y
# CONFIG_RT_USING_ADC is not set
CONFIG_RT_USING_PWM=y
# CONFIG_RT_USING_MTD_NOR is not set
CONFIG_RT_USING_MTD_NAND=y
CONFIG_RT_MTD_NAND_DEBUG=y
CONFIG_RT_USING_MTD=y
# CONFIG_MTD_USING_NOR is not set
CONFIG_MTD_USING_NAND=y
# CONFIG_RT_USING_PM is not set
CONFIG_RT_USING_RTC=y
# CONFIG_RT_USING_SOFT_RTC is not set
# CONFIG_RT_USING_SDIO is not set
CONFIG_RT_USING_SPI=y
# CONFIG_RT_USING_QSPI is not set
CONFIG_RT_USING_SPI_MSD=y
# CONFIG_RT_USING_SFUD is not set
# CONFIG_RT_USING_W25QXX is not set
# CONFIG_RT_USING_GD is not set
# CONFIG_RT_USING_ENC28J60 is not set
# CONFIG_RT_USING_SPI_WIFI is not set
# CONFIG_RT_USING_WDT is not set
# CONFIG_RT_USING_AUDIO is not set

#
# Using WiFi
#
# CONFIG_RT_USING_WIFI is not set

#
# Using USB
#
# CONFIG_RT_USING_USB_HOST is not set
# CONFIG_RT_USING_USB_DEVICE is not set

#
# POSIX layer and C standard library
#
CONFIG_RT_USING_LIBC=y
CONFIG_RT_USING_PTHREADS=y
CONFIG_RT_USING_POSIX=y
# CONFIG_RT_USING_POSIX_MMAP is not set
# CONFIG_RT_USING_POSIX_TERMIOS is not set
# CONFIG_RT_USING_POSIX_AIO is not set
# CONFIG_RT_USING_MODULE is not set

#
# Network
#

#
# Socket abstraction layer
#
CONFIG_RT_USING_SAL=y

#
# protocol stack implement
#
CONFIG_SAL_USING_LWIP=y
CONFIG_SAL_USING_POSIX=y
CONFIG_SAL_PROTO_FAMILIES_NUM=4

#
# light weight TCP/IP stack
#
CONFIG_RT_USING_LWIP=y
CONFIG_RT_USING_LWIP141=y
# CONFIG_RT_USING_LWIP202 is not set
# CONFIG_RT_USING_LWIP210 is not set
CONFIG_RT_LWIP_IGMP=y
CONFIG_RT_LWIP_ICMP=y
# CONFIG_RT_LWIP_SNMP is not set
CONFIG_RT_LWIP_DNS=y
# CONFIG_RT_LWIP_DHCP is not set

#
# Static IPv4 Address
#
CONFIG_RT_LWIP_IPADDR="193.169.2.230"
CONFIG_RT_LWIP_GWADDR="193.169.2.1"
CONFIG_RT_LWIP_MSKADDR="255.255.255.0"
CONFIG_RT_LWIP_UDP=y
CONFIG_RT_LWIP_TCP=y
CONFIG_RT_LWIP_RAW=y
# CONFIG_RT_LWIP_PPP is not set
CONFIG_RT_MEMP_NUM_NETCONN=8
CONFIG_RT_LWIP_PBUF_NUM=4
CONFIG_RT_LWIP_RAW_PCB_NUM=4
CONFIG_RT_LWIP_UDP_PCB_NUM=4
CONFIG_RT_LWIP_TCP_PCB_NUM=3
CONFIG_RT_LWIP_TCP_SEG_NUM=40
CONFIG_RT_LWIP_TCP_SND_BUF=4096
CONFIG_RT_LWIP_TCP_WND=2048
CONFIG_RT_LWIP_TCPTHREAD_PRIORITY=12
CONFIG_RT_LWIP_TCPTHREAD_MBOX_SIZE=8
CONFIG_RT_LWIP_TCPTHREAD_STACKSIZE=4096
# CONFIG_LWIP_NO_RX_THREAD is not set
# CONFIG_LWIP_NO_TX_THREAD is not set
CONFIG_RT_LWIP_ETHTHREAD_PRIORITY=14
CONFIG_RT_LWIP_ETHTHREAD_STACKSIZE=512
CONFIG_RT_LWIP_ETHTHREAD_MBOX_SIZE=8
# CONFIG_RT_LWIP_REASSEMBLY_FRAG is not set
CONFIG_LWIP_NETIF_STATUS_CALLBACK=1
CONFIG_SO_REUSE=1
CONFIG_LWIP_SO_RCVTIMEO=1
CONFIG_LWIP_SO_SNDTIMEO=1
CONFIG_LWIP_SO_RCVBUF=1
# CONFIG_RT_LWIP_NETIF_LOOPBACK is not set
CONFIG_LWIP_NETIF_LOOPBACK=0
# CONFIG_RT_LWIP_STATS is not set
# CONFIG_RT_LWIP_DEBUG is not set

#
# Modbus master and slave stack
#
CONFIG_RT_USING_MODBUS=y
CONFIG_RT_MODBUS_MASTER_RTU=y
CONFIG_RT_MODBUS_SLAVE_RTU=y
# CONFIG_RT_MODBUS_SLAVE_USE_CONTROL_PIN is not set

#
# AT commands
#
# CONFIG_RT_USING_AT is not set
# CONFIG_LWIP_USING_DHCPD is not set

#
# VBUS(Virtual Software BUS)
#
# CONFIG_RT_USING_VBUS is not set

#
# Utilities
#
# CONFIG_RT_USING_LOGTRACE is not set
# CONFIG_RT_USING_RYM is not set
# CONFIG_RT_USING_ULOG is not set
# CONFIG_RT_USING_UTEST is not set

#
# RT-Thread RTGUI
#
# CONFIG_RT_USING_RTGUI is not set

#
# RT-Thread online packages
#

#
# IoT - internet of things
#
# CONFIG_PKG_USING_PAHOMQTT is not set
CONFIG_PKG_USING_WEBCLIENT=y
CONFIG_PKG_WEBCLIENT_PATH="/packages/iot/webclient"
# CONFIG_WEBCLIENT_DEBUG is not set
CONFIG_WEBCLIENT_USING_SAMPLES=y
CONFIG_WEBCLIENT_NOT_USE_TLS=y
# CONFIG_WEBCLIENT_USING_SAL_TLS is not set
# CONFIG_WEBCLIENT_USING_MBED_TLS is not set
# CONFIG_PKG_USING_WEBCLIENT_V201 is not set
# CONFIG_PKG_USING_WEBCLIENT_V200 is not set
# CONFIG_PKG_USING_WEBCLIENT_V100 is not set
CONFIG_PKG_USING_WEBCLIENT_LATEST_VERSION=y
CONFIG_PKG_WEBCLIENT_VER="latest"
# CONFIG_PKG_USING_WEBNET is not set
# CONFIG_PKG_USING_MONGOOSE is not set
# CONFIG_PKG_USING_WEBTERMINAL is not set
CONFIG_PKG_USING_CJSON=y
CONFIG_PKG_CJSON_PATH="/packages/iot/cJSON"
CONFIG_PKG_USING_CJSON_V102=y
# CONFIG_PKG_USING_CJSON_LATEST_VERSION is not set
CONFIG_PKG_CJSON_VER="v1.0.2"
# CONFIG_PKG_USING_JSMN is not set
# CONFIG_PKG_USING_LIBMODBUS is not set
# CONFIG_PKG_USING_LJSON is not set
# CONFIG_PKG_USING_EZXML is not set
# CONFIG_PKG_USING_NANOPB is not set

#
# Wi-Fi
#

#
# Marvell WiFi
#
# CONFIG_PKG_USING_WLANMARVELL is not set

#
# Wiced WiFi
#
# CONFIG_PKG_USING_WLAN_WICED is not set
# CONFIG_PKG_USING_RW007 is not set
# CONFIG_PKG_USING_COAP is not set
# CONFIG_PKG_USING_NOPOLL is not set
CONFIG_PKG_USING_NETUTILS=y
CONFIG_PKG_NETUTILS_PATH="/packages/iot/netutils"
# CONFIG_PKG_NETUTILS_PING is not set
# CONFIG_PKG_NETUTILS_TFTP is not set
# CONFIG_PKG_NETUTILS_IPERF is not set
# CONFIG_PKG_NETUTILS_NETIO is not set
# CONFIG_PKG_NETUTILS_NTP is not set
CONFIG_PKG_NETUTILS_TELNET=y
# CONFIG_PKG_NETUTILS_TCPDUMP is not set
CONFIG_PKG_USING_NETUTILS_LATEST_VERSION=y
# CONFIG_PKG_USING_NETUTILS_V100 is not set
CONFIG_PKG_NETUTILS_VER="latest"
# CONFIG_PKG_USING_AT_DEVICE is not set
# CONFIG_PKG_USING_WIZNET is not set

#
# IoT Cloud
#
# CONFIG_PKG_USING_ONENET is not set
# CONFIG_PKG_USING_GAGENT_CLOUD is not set
# CONFIG_PKG_USING_ALI_IOTKIT is not set
# CONFIG_PKG_USING_AZURE is not set
# CONFIG_PKG_USING_TENCENT_IOTKIT is not set
# CONFIG_PKG_USING_NIMBLE is not set
# CONFIG_PKG_USING_OTA_DOWNLOADER is not set

#
# security packages
#
# CONFIG_PKG_USING_MBEDTLS is not set
# CONFIG_PKG_USING_libsodium is not set
CONFIG_PKG_USING_TINYCRYPT=y
CONFIG_PKG_TINYCRYPT_PATH="/packages/security/tinycrypt"
CONFIG_PKG_USING_TINYCRYPT_V100=y
# CONFIG_PKG_USING_TINYCRYPT_LATEST_VERSION is not set
CONFIG_PKG_TINYCRYPT_VER="v1.0.0"
CONFIG_TINY_CRYPT_MD5=y
CONFIG_TINY_CRYPT_BASE64=y
CONFIG_TINY_CRYPT_AES=y
CONFIG_TINY_CRYPT_AES_ROM_TABLES=y
# CONFIG_TINYCRYPT_USING_AES_SAMPLE is not set
CONFIG_TINY_CRYPT_SHA1=y
CONFIG_TINY_CRYPT_SHA256=y

#
# language packages
#
# CONFIG_PKG_USING_LUA is not set
# CONFIG_PKG_USING_JERRYSCRIPT is not set
CONFIG_PKG_USING_MICROPYTHON=y
CONFIG_PKG_MICROPYTHON_PATH="/packages/language/micropython"

#
# Hardware Module
#
# CONFIG_MICROPYTHON_USING_MACHINE_I2C is not set
# CONFIG_MICROPYTHON_USING_MACHINE_SPI is not set
# CONFIG_MICROPYTHON_USING_MACHINE_UART is not set

#
# System Module
#
# CONFIG_MICROPYTHON_USING_UOS is not set
# CONFIG_MICROPYTHON_USING_THREAD is not set
# CONFIG_MICROPYTHON_USING_USELECT is not set
# CONFIG_MICROPYTHON_USING_UCTYPES is not set
# CONFIG_MICROPYTHON_USING_UERRNO is not set
# CONFIG_MICROPYTHON_USING_FFI is not set

#
# Tools Module
#
# CONFIG_MICROPYTHON_USING_CMATH is not set
# CONFIG_MICROPYTHON_USING_UBINASCII is not set
# CONFIG_MICROPYTHON_USING_UHASHLIB is not set
# CONFIG_MICROPYTHON_USING_UHEAPQ is not set
# CONFIG_MICROPYTHON_USING_UJSON is not set
# CONFIG_MICROPYTHON_USING_URE is not set
# CONFIG_MICROPYTHON_USING_UZLIB is not set
# CONFIG_MICROPYTHON_USING_URANDOM is not set

#
# Network Module
#
# CONFIG_MICROPYTHON_USING_USOCKET is not set
# CONFIG_MICROPYTHON_USING_USSL is not set
CONFIG_PKG_MICROPYTHON_HEAP_SIZE=8192
CONFIG_PKG_USING_MICROPYTHON_LATEST_VERSION=y
# CONFIG_PKG_USING_MICROPYTHON_V11000 is not set
# CONFIG_PKG_USING_MICROPYTHON_V10903 is not set
CONFIG_PKG_MICROPYTHON_VER="latest"
CONFIG_PKG_MICROPYTHON_VER_NUM=0x99999

#
# multimedia packages
#
# CONFIG_PKG_USING_OPENMV is not set
# CONFIG_PKG_USING_MUPDF is not set
# CONFIG_PKG_USING_STEMWIN is not set

#
# tools packages
#
# CONFIG_PKG_USING_CMBACKTRACE is not set
# CONFIG_PKG_USING_EASYFLASH is not set
# CONFIG_PKG_USING_EASYLOGGER is not set
# CONFIG_PKG_USING_SYSTEMVIEW is not set
# CONFIG_PKG_USING_RDB is not set
# CONFIG_PKG_USING_QRCODE is not set
# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
CONFIG_PKG_USING_ADBD=y
CONFIG_ADB_TR_TCPIP_ENABLE=y
# CONFIG_ADB_TR_USB_ENABLE is not set
CONFIG_ADB_TR_STACK_SIZE=1280
CONFIG_ADB_SERVICE_SHELL_ENABLE=y
CONFIG_ADB_SERVICE_FILE_ENABLE=y
CONFIG_ADB_FILESYNC_STACK_SIZE=2304
CONFIG_ADB_FILESYNC_RECV_TIMEOUT=2000
CONFIG_ADB_EXTERNAL_MOD_ENABLE=y
CONFIG_ADB_FILESYNC_MOD_ENABLE=y
CONFIG_ADB_FILELIST_MOD_ENABLE=y
# CONFIG_ADB_FILELIST_FULL_PATH is not set
# CONFIG_ADB_FILELIST_SUP_MD5 is not set
# CONFIG_ADB_FILELIST_SUP_DEV is not set
# CONFIG_ADB_FILELIST_SUP_INO is not set
CONFIG_ADB_FILELIST_SUP_MODE=y
# CONFIG_ADB_FILELIST_SUP_NLINK is not set
# CONFIG_ADB_FILELIST_SUP_UID is not set
# CONFIG_ADB_FILELIST_SUP_GID is not set
# CONFIG_ADB_FILELIST_SUP_RDEV is not set
CONFIG_ADB_FILELIST_SUP_SIZE=y
# CONFIG_ADB_FILELIST_SUP_BLKSIZE is not set
# CONFIG_ADB_FILELIST_SUP_BLOCKS is not set
# CONFIG_ADB_FILELIST_SUP_ATIME is not set
# CONFIG_ADB_FILELIST_SUP_MTIME is not set
# CONFIG_ADB_FILELIST_SUP_CTIME is not set
CONFIG_PKG_ADBD_PATH="/packages/tools/adbd"
# CONFIG_PKG_USING_ADBD_V110 is not set
CONFIG_PKG_USING_ADBD_LATEST_VERSION=y
CONFIG_PKG_ADBD_VER="latest"

#
# system packages
#
# CONFIG_PKG_USING_GUIENGINE is not set
# CONFIG_PKG_USING_CAIRO is not set
# CONFIG_PKG_USING_PIXMAN is not set
# CONFIG_PKG_USING_LWEXT4 is not set
# CONFIG_PKG_USING_PARTITION is not set
# CONFIG_PKG_USING_FAL is not set
# CONFIG_PKG_USING_SQLITE is not set
# CONFIG_PKG_USING_RTI is not set
# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
# CONFIG_PKG_USING_CMSIS is not set
# CONFIG_PKG_USING_DFS_YAFFS is not set
# CONFIG_PKG_USING_LITTLEFS is not set
# CONFIG_PKG_USING_THREAD_POOL is not set

#
# peripheral libraries and drivers
#
# CONFIG_PKG_USING_SENSORS_DRIVERS is not set
# CONFIG_PKG_USING_REALTEK_AMEBA is not set
# CONFIG_PKG_USING_SHT2X is not set
# CONFIG_PKG_USING_AHT10 is not set
# CONFIG_PKG_USING_AP3216C is not set
# CONFIG_PKG_USING_STM32_SDIO is not set
# CONFIG_PKG_USING_ICM20608 is not set
# CONFIG_PKG_USING_U8G2 is not set
# CONFIG_PKG_USING_BUTTON is not set
# CONFIG_PKG_USING_MPU6XXX is not set
# CONFIG_PKG_USING_PCF8574 is not set
# CONFIG_PKG_USING_SX12XX is not set
# CONFIG_PKG_USING_SIGNAL_LED is not set
# CONFIG_PKG_USING_WM_LIBRARIES is not set
# CONFIG_PKG_USING_KENDRYTE_SDK is not set
# CONFIG_PKG_USING_INFRARED is not set

#
# miscellaneous packages
#
# CONFIG_PKG_USING_LIBCSV is not set
# CONFIG_PKG_USING_OPTPARSE is not set
# CONFIG_PKG_USING_FASTLZ is not set
# CONFIG_PKG_USING_MINILZO is not set
# CONFIG_PKG_USING_QUICKLZ is not set
# CONFIG_PKG_USING_MULTIBUTTON is not set
# CONFIG_PKG_USING_CANFESTIVAL is not set
# CONFIG_PKG_USING_ZLIB is not set
# CONFIG_PKG_USING_DSTR is not set
# CONFIG_PKG_USING_TINYFRAME is not set
# CONFIG_PKG_USING_KENDRYTE_DEMO is not set

#
# samples: kernel and components samples
#
# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
CONFIG_PKG_USING_NETWORK_SAMPLES=y
CONFIG_PKG_NETWORK_SAMPLES_PATH="/packages/misc/samples/network_samples"
# CONFIG_PKG_USING_NETWORK_SAMPLES_V030 is not set
CONFIG_PKG_USING_NETWORK_SAMPLES_LATEST_VERSION=y
CONFIG_PKG_NETWORK_SAMPLES_VER="latest"
CONFIG_NETWORK_SAMPLES_USING_TCP_CLIENT=y
CONFIG_NETWORK_SAMPLES_USING_TCP_SERVER=y
CONFIG_NETWORK_SAMPLES_USING_UDP_CLIENT=y
CONFIG_NETWORK_SAMPLES_USING_UDP_SERVER=y
CONFIG_NETWORK_SAMPLES_USING_TCP_CLIENT_SELECT=y
# CONFIG_NETWORK_SAMPLES_USING_HTTP_CLIENT is not set
# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
# CONFIG_PKG_USING_HELLO is not set
# CONFIG_PKG_USING_VI is not set
# CONFIG_PKG_USING_NNOM is not set
# CONFIG_RT_USING_SELF_BOOT is not set
CONFIG_RT_USING_UART2=y
CONFIG_RT_USING_UART1=y
CONFIG_RT_UART_RX_BUFFER_SIZE=64
CONFIG_RT_USING_GMAC_INT_MODE=y
CONFIG_RT_USING_FPU=y
CONFIG_RT_USING_SPI0=y
CONFIG_RT_USING_SPI1=y
# CONFIG_RT_USING_I2C1 is not set
CONFIG_RT_USING_I2C2=y
CONFIG_USING_BXCAN0=y
CONFIG_USING_BXCAN1=y
CONFIG_NO_TOUCH=y
# CONFIG_TINA_USING_TOUCH is not set
CONFIG_RT_RTC_NAME="rtc"
后记
  • 一定要学会使用 env 工具，不会使用 env 就进行 rtt 的开发，那还是入门级的水平。 利用 env 配置组件和工具包，使用真是太方便了。
  • 按照顺序进行配置，即网络调通了再调试 SAL ； SAL 调通了才能调试 adb 。
南工孙冬梅
关注
  • 1
    点赞
  • 踩
  • 0
    收藏
    觉得还不错? 一键收藏
  • 打赏
    打赏
  • 0
    评论
专栏目录
最新Jlink RTT使用代码
08-16
1.把SEGGER_RTT.c SEGGER_RTT.h SEGGER_RTT_Conf.h SEGGER_RTT_printf.c4个文件，导入到keil项目中,记得工程中添加include引用路径. 2. include "SEGGER_RTT.h" 使用 SEGGER_RTT_printf(0, "SEGGERRTT %d %d %d \...
RTT 硬件IIC 例程程序
02-01
本例程主要关注的是如何在RTT环境下使用硬件IIC（Inter-Integrated Circuit）接口进行通信。IIC是一种两线制的串行总线，常用于微控制器与各种外围设备如传感器、显示模块等之间的通信。 硬件IIC在RTT中的实现通常...
rt-thread之adc组件的使用记录(adc+dma的方式)
scl8295的博客
03-19 674
【代码】rt-thread之adc组件的使用记录(adc+dma的方式)
RT-Thread中使用adbd传输文件
孙冬梅的博客
05-31 1896
与开发进行文件传输，可使用 tftp ,要在开发板端打开tftp服务。 另外还有一种方法： adbd, 利用 pkgs, 可以方便地实现在PC端将文件传到开发板上，还可以传送文件夹。
rt-thread 挂载romfs与ramfs
最新发布
my_fly_dream的博客
05-12 555
rt-thread中挂载romfs与ramfs并进行文件操作
warning:In file included from...
宿管大爷
01-15 6638
warning:In file included from..._mick_dos的博客-CSDN博客https://blog.csdn.net/qq_41853209/article/details/115261386
【DIY数字仪表】RT-Thread结合TouchGFX实战教程（完）
FILLMOREad的博客
08-26 884
作者：KK目录：【DIY数字仪表】STM32F429移植TouchGFX到RT-Thread系统（1）【DIY数字仪表】使用TouchGFX的MVP架构来实现GUI和硬件的双向交互（2）...
rtt.rar_RTT
09-24
在RTT的场景下，可能还需要设计和实现中断服务程序。中断是硬件向处理器发出的信号，表明需要立即处理某个事件。中断服务程序是处理这些事件的代码片段，必须快速、高效，以保持系统的实时性。 此外，内存管理也是...
W601-RTT开发环境
01-02
《W601芯片在RT-Thread操作系统下的开发环境构建详解》 在嵌入式系统开发领域，RT-Thread是一款广泛应用的实时操作系统（RTOS），它以其稳定性和强大的功能深受开发者喜爱。本文将深入探讨如何在W601芯片上移植并...
SEGGER-RTT-Viewer 上位机
10-30
在实际应用中，SEGGER RTT Viewer 可以与J-Link、OpenOCD等调试器配合使用，帮助开发者快速定位和解决嵌入式系统的问题，提高开发效率。对于那些没有内置调试器接口的微控制器，RTT提供了一种有效的替代方案。
adb介绍
nwpushuai的博客
12-12 1983
目录 1. 概要2. 工作原理 2.1 adb的三个组成元素2.2 adb的两个数据通道 2.2.1 client与server的数据通道2.2.2 server与adbd的数据通道 3. 其他 3.1 源码目录3.2 USB Vendor ID3.3 几条有趣的adb命令 请尊重原创版权，转载注明出处。 1. 概要 Android Debu
RT-Thread:初学-ENV工具和工程配置——记录
l1871684591的博客
03-08 1851
初学 最近在学RT-Thread系统，看官方文档都是用Env工具配置系统和软件的。 没办法只能先了解了解这个工具。光是看官方的BSP教程一直没看懂到底是怎么配置系统和软件的。摸了很长一段时间都没搞懂这个这个Env工具是基于什么样形式方法管理和配置软件包，只好上网逛逛。 逛了几天下，总算有点眉目。 1.Env工具是个内嵌命令行（CMD）的软件，在安装目录下包含了除git外的需要使用的工具，如下图：...
RT-Thread内核移植
Mr.w的博客
08-16 5924
  记录代码移植过程，成功一步记录一步 第一步：建立裸机程序 使用STM32CubeMx建立一个裸机程序 生成MDK5工程 第二步：参考0-bare-metal完成board.c、board.h文件 在Drivers组下添加board.c、board.h文件 添加board.c文件实现board.c里面关于关于时钟配置、串口初始化、GPIO初始化等函数 void bsp_...
rt-thread版本3.1.X串口初始化流程
Edward的博客
08-08 1079
流程 rt_hw_usart_init中调用rt_device_register将dev->flag设置为RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX(如果开启了DMA，则RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX| RT_DEVICE_FLAG_DMA_RX) rt_console_set_devi...
【项目实战】复旦微MCU+RT-thread+Moudbus(2)
卤煮小鱼的博客
02-08 3480
复旦微MCU+RT-thread+Moudbus
RTT-仿真问题
BUG的博客
06-23 577
DARMSTM.DLL -pSTM32F103ZE
Android之使用adb命令检查网络连接
热门推荐
LVXIANGAN的专栏
09-08 1万+
收到测试反馈：“你负责的Android应用无法访问网络，但其他app功能能够正常访问网络，请检查代码有没有问题” 背景：在自定义Android主机系统中，内置TBOX（实际是内置了一个sim卡移动网络） ①　ping目标主机的域名和IP（ping会自动将域名转换为IP） ②　不带包头的包大小和带包头的包大小（参考“-s”参数） ③　icmp_seq：ping序列，从1开始； 　　ttl：剩余的ttl； 　　time: 响应时间,数值越小，联通速度越快； ④　发出去的包数，返回的包数，.
Android Q共享音频输入
u013490411的博客
06-17 7557
api介绍 Android Q允许多个应用同时录音。下面摘录一下官方说明： 当两个应用试图捕获音频时，它们都可以接收输入信号，或者其中一个可能会受到静默处理。 四种主要方案如下： Google 助理 + 普通应用 无障碍服务 + 普通应用 两个普通应用 语音通话 + 普通应用 Google 助理 + 普通应用 Google 助理属于特权应用，因为其预先安装在设备上并且拥有 RoleManager.ROLE_ASSISTANT 角色。拥有此角色的任何其他预安装应用都会受到类似处理。 Android 根据
jlink rtt viewer 使用教程
06-10
J-Link RTT Viewer是一款免费的J-Link实时跟踪（RTT）输出可视化工具，用于在Windows操作系统上显示和记录RTT输出。下面是使用J-Link RTT Viewer的步骤： 1. 下载和安装J-Link软件和驱动程序。 2. 连接J-Link调试器和目标设备。 3. 打开J-Link RTT Viewer工具。 4. 在J-Link RTT Viewer工具中，选择J-Link调试器连接接口和目标设备芯片型号。 5. 点击“Connect”按钮连接J-Link调试器和目标设备。 6. 在“Terminal”选项卡中输入命令“help”，查看可用的命令列表。 7. 在“Terminal”选项卡中输入命令“list”，查看可用的RTT通道列表。 8. 在“Terminal”选项卡中输入命令“open <channel>”，打开指定的RTT通道。 9. 在“Terminal”选项卡中输入命令“start”，开始记录RTT输出。 10. 在“Terminal”选项卡中输入命令“stop”，停止记录RTT输出。 11. 在“Terminal”选项卡中输入命令“close”，关闭指定的RTT通道。 12. 在“Terminal”选项卡中输入命令“exit”，退出J-Link RTT Viewer工具。 以上是使用J-Link RTT Viewer的基本步骤，您可以根据需要进一步了解和使用。

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

南工孙冬梅

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付：¥1
获取中
扫码支付

您的余额不足，请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值