网管系统2层拓朴发现l2discover nms

最新推荐文章于 2018-09-09 19:44:07 发布

superpan

最新推荐文章于 2018-09-09 19:44:07 发布

阅读量1.2k

点赞数

文章标签： tree application cisco layer network

本文链接：https://blog.csdn.net/superpan/article/details/1509201

版权

Goals:
The aim of L2Discover is to discover the second layer topology of a switched network.
The main goal was to implement a simple desktop application that can be used as a layer 2
ping and traceroute to map the current network topology.

Features.

As the information source of the topology the following sources have been used:

Cisco Discovery Protocol
If your equipment does not support this protocol the tool will not be able to generate the porper map.

Spanning Tree Protocol (Rapid Spanning Tree Protocol)
This information is used to find the redundant links.

Filtering Address Base
It is used to locate the unmanagable devices on the network.
If situated on a port there are several MAC addresses and the port is not part of the STP or CDP topology then it is highly probable that there is an unmanaged switch or hub.