uCOS-II任务建立示例

最新推荐文章于 2019-05-29 22:43:42 发布

supreme42

最新推荐文章于 2019-05-29 22:43:42 发布

阅读量920

点赞数

分类专栏： ARM与Linux 文章标签：任务 os io include

ARM与Linux 专栏收录该内容

22 篇文章 0 订阅

订阅专栏

#include "config.h"
#include "stdlib.h"

#define LED1 (1<<18) // P1.18控制LED1
#define LED2 (1<<19) // P1.19控制LED2

#define TaskStkLengh 64 // 定义用户任务的堆栈长度

OS_STK TaskStartStk[TaskStkLengh]; // 定义用户任务0的堆栈
OS_STK TaskLED1Stk[TaskStkLengh];
OS_STK TaskLED2Stk[TaskStkLengh];

void TaskStart(void *pdata);    //Task0 任务0
void TaskLED1(void *pdata);
void TaskLED2(void *pdata);

int main (void)
{
OSInit ();
OSTaskCreate (TaskStart,(void *)0, &TaskStartStk[TaskStkLengh - 1], 0);
OSStart ();
return 0;
}

void TaskStart(void *pdata)
{
pdata = pdata;
TargetInit ();
OSTaskCreate(TaskLED1,(void *)0, &TaskLED1Stk[TaskStkLengh - 1], 1);
OSTaskCreate(TaskLED2,(void *)0, &TaskLED2Stk[TaskStkLengh - 1], 2);
while(1)
{
OSTimeDlyHMSM(0,0,10,0);
}
}

void TaskLED1(void *pdata)
{
pdata = pdata;
PINSEL2 = PINSEL2 & (~0x08);                                    // P1[25:16]选择GPIO
IO1DIR |= LED1;                                                 // 设置LED1控制口输出
    IO1SET = LED1;
while(1)
{
   IO1CLR = LED1;
   OSTimeDly(OS_TICKS_PER_SEC / 2);
   IO1SET = LED1;
        OSTimeDly(OS_TICKS_PER_SEC / 2);
}
}

void TaskLED2(void *pdata)
{
pdata = pdata;
PINSEL2 = PINSEL2 & (~0x08);                                    // P1[25:16]选择GPIO
IO1DIR |= LED2;                                                // 设置LED1控制口输出
    IO1SET = LED2;
while(1)
{
   IO1CLR = LED2;
   OSTimeDly(OS_TICKS_PER_SEC);
   IO1SET = LED2;
        OSTimeDly(OS_TICKS_PER_SEC);
}
}