ArcEngine新建几何网络_GeometricNetwork

前几天需要写两个方法，一个是需要构建网络数据集NetowrkDataset，一个是需要构建几何网络GeometricNetwork;
代码在AE的帮助文档中都是有的；如果你找不到的话直接百度也是有的，不过建议有些基础的还是直接看文档比较好~如果不知道在哪，直接百度**
How to create geometric networks within a geodatabase**

---

ArcGIS Engine 10.1 EN

Win7 64位

VS2010

---

本文说说在写的过程中遇到的问题；首先这篇主要是介绍几何网络的构建，后面将会讲到网络数据集；

**下面的代码方法是直接从文档中拷贝过来我修改的，修改依据是在ArcCatalog中
在Dataset中右键新建几何网络的默认设置流程，所以下面的有些代码我会进行删改；**

我会在代码中直接加注释进行解释，重点内容还会在末尾解释！~

        public void CreateGeometricNetwork(IWorkspace workspace, IFeatureDatasetName
          featureDatasetName)//这里的参数不要告诉我你不会写代码得到~
        {
            // Create a network loader.//创建一个网络加载器
            INetworkLoader2 networkLoader2 = new NetworkLoaderClass();

            // Set the network name.//给加载器命名--此名称一定不能为中文！
            networkLoader2.NetworkName = "Water_Net";

            // Set the network type.//类型，效用网络就是几何网络
            networkLoader2.NetworkType = esriNetworkType.esriNTUtilityNetwork;

            // Set the containing feature dataset.//设置关联的数据集IName
            networkLoader2.FeatureDatasetName = (IDatasetName)featureDatasetName;

            //添加featureclass到网络中,这里的featureclassname一定不能是中文！！！
            // Add the two classes to the network.
            if (networkLoader2.CanUseFeatureClass("featureclassname") ==
              esriNetworkLoaderFeatureClassCheck.esriNLFCCValid)
            {
                networkLoader2.AddFeatureClass("featureclassname",
                  esriFeatureType.esriFTComplexEdge, null, false);
            }

            //由于只有一个线图层，所以这个示例代码中的线图层就不用判断了
            //if (networkLoader2.CanUseFeatureClass("Tanks") == esriNetworkLoaderFeatureClassCheck.esriNLFCCValid)
            //{
            //networkLoader2.AddFeatureClass("Tanks",esriFeatureType.esriFTSimpleJunction, null, false);
            //}

            // Set the enabled field for the distribmains class.//这个可以直接注释掉，也可以根据线图层做修改，这里直接注释
            //INetworkLoaderProps networkLoaderProps = (INetworkLoaderProps)networkLoader2;
            //String defaultEnabledFieldName = networkLoaderProps.DefaultEnabledField;
            //esriNetworkLoaderFieldCheck enabledFieldCheck =
            //  networkLoader2.CheckEnabledDisabledField("Tanks", defaultEnabledFieldName);
            //switch (enabledFieldCheck)
            //{
            //    case esriNetworkLoaderFieldCheck.esriNLFCValid:
            //    case esriNetworkLoaderFieldCheck.esriNLFCNotFound:
            //        networkLoader2.PutEnabledDisabledFieldName("Tanks",
            //          defaultEnabledFieldName);
            //        break;
            //    default:
            //        Console.WriteLine(
            //          "The field {0} could not be used as an enabled/disabled field.",
            //          defaultEnabledFieldName);
            //        break;
            //}

            //networkLoader2.PreserveEnabledValues = true;

            //这个是设置源和汇的，主要针对点图层，这里不需要就注释掉
            // Set the ancillary role field for the tanks class.
            //String defaultAncillaryRoleFieldName =
            //  networkLoaderProps.DefaultAncillaryRoleField;
            //esriNetworkLoaderFieldCheck ancillaryRoleFieldCheck =
            //  networkLoader2.CheckAncillaryRoleField("Tanks",
            //  defaultAncillaryRoleFieldName);
            //switch (ancillaryRoleFieldCheck)
            //{
            //    case esriNetworkLoaderFieldCheck.esriNLFCValid:
            //    case esriNetworkLoaderFieldCheck.esriNLFCNotFound:
            //        networkLoader2.PutAncillaryRole("Tanks",
            //          esriNetworkClassAncillaryRole.esriNCARSourceSink,
            //          defaultAncillaryRoleFieldName);
            //        break;
            //    default:
            //        Console.WriteLine(
            //          "The field {0} could not be used as an ancillary role field.",
            //          defaultAncillaryRoleFieldName);
            //        break;
            //}

            //这里针对的是GDB，不是SDE，所以也注释掉
            // If the geodatabase is an SDE GDB, set the configuration keyword.
            //if (workspace.Type == esriWorkspaceType.esriRemoteDatabaseWorkspace)
            //{
            //    networkLoader2.ConfigurationKeyword = "Network_Defaults";
            //}

            //这里我们不设置Snap
            // Set the snap tolerance for the network.
            //networkLoader2.SnapTolerance = networkLoader2.MinSnapTolerance;
            ((INetworkLoader3)networkLoader2).UseXYsForSnapping = false;

            //不设置权重
            //// Add a weight with a double type to the network.
            //networkLoader2.AddWeight("MainWeight", esriWeightType.esriWTDouble, 0);

            //// For weights of type esriWTBitGate, the BitGateSize parameter should be set:
            //networkLoader2.AddWeight("WTBitGateEx", esriWeightType.esriWTBitGate, 5);

            //// Associate the MainWeight weight with the DIAMETER field of Distribmains.
            //networkLoader2.AddWeightAssociation("MainWeight", "Distribmains", "DIAMETER");

            //构建几何网络
            // Load the network.
            networkLoader2.LoadNetwork();

            //不管ErrorTable
            // Get the name of the network's error table.
            //String errorTableName = networkLoader2.ErrorTableName;

            //// Display the number of invalid features in the Distribmains class.
            //int numInvalidFeatures = networkLoader2.get_NumInvalidFeatures("Distribmains")
            //  ;
            //Console.WriteLine("Distribmains contains {0} invalid features.",
            //  numInvalidFeatures);

            //// Display the number of invalid features in the network.
            //int totalNumInvalidFeatures = networkLoader2.TotalNumInvalidFeatures;
            //Console.WriteLine("The network contains {0} invalid features.",
            //  totalNumInvalidFeatures);
        }

上面的代码除了//networkLoader2.PreserveEnabledValues = true;其他我是根据全部默认设置进行修改的，大家有其他需求可以自己修改；

---

尤其需要大家注意的是两个地方，一个是NetworkName这个属性，就是网络数据集的名称一定不能为中文；另一个就是我们需要创建网络数据集的featureclass的名称；二者如果有一个存在中文，那么在最后构建几何网络的时候都会出现各种乱七八糟的异常;包括The Table was not found、此版本的地理数据库不支持表格附件。等，异常信息主要是看你的ArcGIS是中文还是英文了~！