![](https://img-blog.csdnimg.cn/20201014180756918.png?x-oss-process=image/resize,m_fixed,h_64,w_64)
嵌入式Linux
文章平均质量分 76
synu_soft
这个作者很懒,什么都没留下…
展开
-
uClibc和Glibc区别
uClibc and Glibc are not the same -- there are a number of differences which may or may not cause you problems. This document attempts to list these differences and, when completed, will contain a转载 2012-10-23 16:23:21 · 758 阅读 · 0 评论 -
uclinux驱动开发环境配置
一、为VMware linux 增加一个虚拟硬盘用于专门开发嵌入式驱动 1、点击VM-->SETTING-->hard disk-->add-->hard disk-->creat a new virtual disk-->scsi-->3G(视情况而定)-->armwork.vmdk-->finish 2、重启linux 3、执转载 2014-07-15 22:34:40 · 431 阅读 · 0 评论 -
uClinux内核添加驱动程序
驱动程序添加到内核的方法: 1、将驱动源码(例 gpio.c gpio.h config.h)copy到 uClinux-dist/linux-2.4.x/drivers/char,修改该目录下的Makefile,在适当的地方添加 obj-$(CONFIG_LENSENS_GPIO) +=gpio.o; 2、在uClinux-dist/linux-2.4.x/drivers/char转载 2014-07-15 22:36:27 · 493 阅读 · 0 评论 -
uClinux内核添加应用程序
HELLO WORLD 的实现 编写的第一个程序当然是hello world程序。 1)在Uclinux-dist/user/下创建一新文件夹lensens_hello 2)编写hello.c #include int main(void) { printf("Hello World!\n"):转载 2014-07-15 22:36:26 · 498 阅读 · 0 评论 -
uclinux驱动程序简单方便的调试方法——动态加载调试方式
对于uclinux来说,调试驱动和应用程序是一个复杂的过程,如果每做一次修改,就要编译一次内核,其工作量是相当巨大的,所以找到一种简单方便的调试方法非常重要,而静态加载驱动和应用程序是工程的最终形式。 记下建立步骤用来备忘和以飨像我这样的小菜虫们,呵呵 (uclinux源码版本为20060311) 1、配置内核: 功能包括 nfs客户服务端 + 可加载模块功能 在内转载 2014-07-15 22:39:56 · 558 阅读 · 0 评论