Mixly按键控制LED灯

Mixly按键控制LED灯

实现米思齐按键控制LED

上拉输入的状态时，管脚#12输出为1，当按下按键时输出0。要注意当按下按键时亮灯时，中间的if语句循环了两次

代码

volatile int b1;
volatile int b2;
volatile int click;
volatile int laststate;
volatile boolean toggle;

void setup(){
  pinMode(13, OUTPUT);
  laststate = digitalRead(12);
  digitalWrite(13,toggle);
  pinMode(12, INPUT_PULLUP);
  b1 = digitalRead(12);
  b2 = digitalRead(12);
  click = 0;
  toggle = LOW;
  Serial.begin(9600);
}

void loop(){
  Serial.println(digitalRead(12));
  b1 = digitalRead(12);
  if (b1 != laststate) {
    delay(20);
    b2 = digitalRead(12);
    if (b1 == b2) {
      laststate = b1;
      click = click + 1;

    }

  }
  if (click == 2) {
    click = 0;
    toggle = !toggle;
    digitalWrite(13,toggle);

  }

}