Error Condition | ||||
---|---|---|---|---|
No Sense | 0 | 00 | 00 | No error |
0 | 5D | 00 | No sense – PFA threshold reached | |
Soft Error | 1 | 01 | 00 | Recovered Write error – no index |
1 | 02 | 00 | Recovered no seek completion | |
1 | 03 | 00 | Recovered Write error – write fault | |
1 | 09 | 00 | Track following error | |
1 | 0B | 01 | Temperature warning | |
1 | 0C | 01 | Recovered Write error with auto-realloc – reallocated | |
1 | 0C | 03 | Recovered Write error – recommend reassign | |
1 | 12 | 01 | Recovered data without ECC using prev logical block ID | |
1 | 12 | 02 | Recovered data with ECC using prev logical block ID | |
1 | 14 | 01 | Recovered Record Not Found | |
1 | 16 | 00 | Recovered Write error – Data Sync Mark Error | |
1 | 16 | 01 | Recovered Write error – Data Sync Error – data rewritten | |
1 | 16 | 02 | Recovered Write error – Data Sync Error – recommend rewrite | |
1 | 16 | 03 | Recovered Write error – Data Sync Error – data auto-reallocated | |
1 | 16 | 04 | Recovered Write error – Data Sync Error – recommend reassignment | |
1 | 17 | 00 | Recovered data with no error correction applied | |
1 | 17 | 01 | Recovered Read error – with retries | |
1 | 17 | 02 | Recovered data using positive offset | |
1 | 17 | 03 | Recovered data using negative offset | |
1 | 17 | 05 | Recovered data using previous logical block ID | |
1 | 17 | 06 | Recovered Read error – without ECC, auto reallocated | |
1 | 17 | 07 | Recovered Read error – without ECC, recommend reassign | |
1 | 17 | 08 | Recovered Read error – without ECC, recommend rewrite | |
1 | 17 | 09 | Recovered Read error – without ECC, data rewritten | |
1 | 18 | 00 | Recovered Read error – with ECC | |
1 | 18 | 01 | Recovered data with ECC and retries | |
1 | 18 | 02 | Recovered Read error – with ECC, auto reallocated | |
1 | 18 | 05 | Recovered Read error – with ECC, recommend reassign | |
1 | 18 | 06 | Recovered data using ECC and offsets | |
1 | 18 | 07 | Recovered Read error – with ECC, data rewritten | |
1 | 1C | 00 | Defect List not found | |
1 | 1C | 01 | Primary defect list not found | |
1 | 1C | 02 | Grown defect list not found | |
1 | 1F | 00 | Partial defect list transferred | |
1 | 44 | 00 | Internal target failure | |
1 | 5D | 00 | PFA threshold reached | |
Not Ready | 2 | 04 | 00 | Not Ready – Cause not reportable. |
2 | 04 | 01 | Not Ready – becoming ready | |
2 | 04 | 02 | Not Ready – need initialise command (start unit) | |
2 | 04 | 03 | Not Ready – manual intervention required | |
2 | 04 | 04 | Not Ready – format in progress | |
2 | 04 | 09 | Not Ready – self-test in progress | |
2 | 31 | 00 | Not Ready – medium format corrupted | |
2 | 31 | 01 | Not Ready – format command failed | |
2 | 35 | 02 | Not Ready – enclosure services unavailable | |
2 | 3A | 00 | Not Ready – medium not present | |
2 | 4C | 00 | Diagnostic Failure – config not loaded | |
Medium Error | 3 | 02 | 00 | Medium Error – No Seek Complete |
3 | 03 | 00 | Medium Error – write fault | |
3 | 10 | 00 | Medium Error – ID CRC error | |
3 | 11 | 00 | Medium Error – unrecovered read error | |
3 | 11 | 01 | Medium Error – read retries exhausted | |
3 | 11 | 02 | Medium Error – error too long to correct | |
3 | 11 | 04 | Medium Error – unrecovered read error – auto re-alloc failed | |
3 | 11 | 0B | Medium Error – unrecovered read error – recommend reassign | |
3 | 14 | 01 | Medium Error – record not found | |
3 | 16 | 00 | Medium Error – Data Sync Mark error | |
3 | 16 | 04 | Medium Error – Data Sync Error – recommend reassign | |
3 | 19 | 00 | Medium Error – defect list error | |
3 | 19 | 01 | Medium Error – defect list not available | |
3 | 19 | 02 | Medium Error – defect list error in primary list | |
3 | 19 | 03 | Medium Error – defect list error in grown list | |
3 | 19 | 0E | Medium Error – fewer than 50% defect list copies | |
3 | 31 | 00 | Medium Error – medium format corrupted | |
3 | 31 | 01 | Medium Error – format command failed | |
Hardware Error | 4 | 01 | 00 | Hardware Error – no index or sector |
4 | 02 | 00 | Hardware Error – no seek complete | |
4 | 03 | 00 | Hardware Error – write fault | |
4 | 09 | 00 | Hardware Error – track following error | |
4 | 11 | 00 | Hardware Error – unrecovered read error in reserved area | |
4 | 16 | 00 | Hardware Error – Data Sync Mark error in reserved area | |
4 | 19 | 00 | Hardware Error – defect list error | |
4 | 19 | 02 | Hardware Error – defect list error in Primary List | |
4 | 19 | 03 | Hardware Error – defect list error in Grown List | |
4 | 31 | 00 | Hardware Error – reassign failed | |
4 | 32 | 00 | Hardware Error – no defect spare available | |
4 | 35 | 01 | Hardware Error – unsupported enclosure function | |
4 | 35 | 02 | Hardware Error – enclosure services unavailable | |
4 | 35 | 03 | Hardware Error – enclosure services transfer failure | |
4 | 35 | 04 | Hardware Error – enclosure services refused | |
4 | 35 | 05 | Hardware Error – enclosure services checksum error | |
4 | 3E | 03 | Hardware Error – self-test failed | |
4 | 3E | 04 | Hardware Error – unable to update self-test | |
4 | 44 | 00 | Hardware Error – internal target failure | |
Illegal Request | 5 | 1A | 00 | Illegal Request – parm list length error |
5 | 20 | 00 | Illegal Request – invalid/unsupported command code | |
5 | 21 | 00 | Illegal Request – LBA out of range | |
5 | 24 | 00 | Illegal Request – invalid field in CDB (Command Descriptor Block) | |
5 | 25 | 00 | Illegal Request – invalid LUN | |
5 | 26 | 00 | Illegal Request – invalid fields in parm list | |
5 | 26 | 01 | Illegal Request – parameter not supported | |
5 | 26 | 02 | Illegal Request – invalid parm value | |
5 | 26 | 03 | Illegal Request – invalid field parameter – threshold parameter | |
5 | 26 | 04 | Illegal Request – invalid release of persistent reservation | |
5 | 2C | 00 | Illegal Request – command sequence error | |
5 | 35 | 01 | Illegal Request – unsupported enclosure function | |
5 | 49 | 00 | Illegal Request – invalid message | |
5 | 53 | 00 | Illegal Request – media load or eject failed | |
5 | 53 | 01 | Illegal Request – unload tape failure | |
5 | 53 | 02 | Illegal Request – medium removal prevented | |
5 | 55 | 00 | Illegal Request – system resource failure | |
5 | 55 | 01 | Illegal Request – system buffer full | |
5 | 55 | 04 | Illegal Request – Insufficient Registration Resources | |
Unit Attention | 6 | 28 | 00 | Unit Attention – not-ready to ready transition (format complete) |
6 | 29 | 00 | Unit Attention – POR or device reset occurred | |
6 | 29 | 01 | Unit Attention – POR occurred | |
6 | 29 | 02 | Unit Attention – SCSI bus reset occurred | |
6 | 29 | 03 | Unit Attention – TARGET RESET occurred | |
6 | 29 | 04 | Unit Attention – self-initiated-reset occurred | |
6 | 29 | 05 | Unit Attention – transceiver mode change to SE | |
6 | 29 | 06 | Unit Attention – transceiver mode change to LVD | |
6 | 2A | 00 | Unit Attention – parameters changed | |
6 | 2A | 01 | Unit Attention – mode parameters changed | |
6 | 2A | 02 | Unit Attention – log select parms changed | |
6 | 2A | 03 | Unit Attention – Reservations pre-empted | |
6 | 2A | 04 | Unit Attention – Reservations released | |
6 | 2A | 05 | Unit Attention – Registrations pre-empted | |
6 | 2F | 00 | Unit Attention – commands cleared by another initiator | |
6 | 3F | 00 | Unit Attention – target operating conditions have changed | |
6 | 3F | 01 | Unit Attention – microcode changed | |
6 | 3F | 02 | Unit Attention – changed operating definition | |
6 | 3F | 03 | Unit Attention – inquiry parameters changed | |
6 | 3F | 05 | Unit Attention – device identifier changed | |
6 | 5D | 00 | Unit Attention – PFA threshold reached | |
Write Protect | 7 | 27 | 00 | Write Protect – command not allowed |
Aborted Command | B | 00 | 00 | Aborted Command – no additional sense code |
B | 1B | 00 | Aborted Command – sync data transfer error (extra ACK) | |
B | 25 | 00 | Aborted Command – unsupported LUN | |
B | 3F | 0F | Aborted Command – echo buffer overwritten | |
B | 43 | 00 | Aborted Command – message reject error | |
B | 44 | 00 | Aborted Command – internal target failure | |
B | 45 | 00 | Aborted Command – Selection/Reselection failure | |
B | 47 | 00 | Aborted Command – SCSI parity error | |
B | 48 | 00 | Aborted Command – initiator-detected error message received | |
B | 49 | 00 | Aborted Command – inappropriate/illegal message | |
B | 4B | 00 | Aborted Command – data phase error | |
B | 4E | 00 | Aborted Command – overlapped commands attempted | |
B | 4F | 00 | Aborted Command – due to loop initialisation | |
Other | E | 1D | 00 | Miscompare – during verify byte check operation |
x | 05 | 00 | Illegal request | |
x | 06 | 00 | Unit attention | |
x | 07 | 00 | Data protect | |
x | 08 | 00 | LUN communication failure | |
x | 08 | 01 | LUN communication timeout | |
x | 08 | 02 | LUN communication parity error | |
x | 08 | 03 | LUN communication CRC error | |
x | 09 | 00 | vendor specific sense key | |
x | 09 | 01 | servo fault | |
x | 09 | 04 | head select fault | |
x | 0A | 00 | error log overflow | |
x | 0B | 00 | aborted command | |
x | 0C | 00 | write error | |
x | 0C | 02 | write error – auto-realloc failed | |
x | 0E | 00 | data miscompare | |
x | 12 | 00 | address mark not found for ID field | |
x | 14 | 00 | logical block not found | |
x | 15 | 00 | random positioning error | |
x | 15 | 01 | mechanical positioning error | |
x | 15 | 02 | positioning error detected by read of medium | |
x | 27 | 00 | write protected | |
x | 29 | 00 | POR or bus reset occurred | |
x | 31 | 01 | format failed | |
x | 32 | 01 | defect list update error | |
x | 32 | 02 | no spares available | |
x | 35 | 01 | unspecified enclosure services failure | |
x | 37 | 00 | parameter rounded | |
x | 3D | 00 | invalid bits in identify message | |
x | 3E | 00 | LUN not self-configured yet | |
x | 40 | 01 | DRAM parity error | |
x | 40 | 02 | DRAM parity error | |
x | 42 | 00 | power-on or self-test failure | |
x | 4C | 00 | LUN failed self-configuration | |
x | 5C | 00 | RPL status change | |
x | 5C | 01 | spindles synchronised | |
x | 5C | 02 | spindles not synchronised | |
x | 65 | 00 | voltage fault | |
x | ≥80 | x | Vendor specific | |
x | x | ≥80 | Vendor specific |