难度:中等
目录
1398. 购买了产品 A 和产品 B 却没有购买产品 C 的顾客
177. 第N高的薪水
编写一个 SQL 查询,获取 Employee 表中第 n 高的薪水(Salary)。
+----+--------+
| Id | Salary |
+----+--------+
| 1 | 100 |
| 2 | 200 |
| 3 | 300 |
+----+--------+
例如上述 Employee 表,n = 2 时,应返回第二高的薪水 200。如果不存在第 n 高的薪水,那么查询应返回 null。
+------------------------+
| getNthHighestSalary(2) |
+------------------------+
| 200 |
+------------------------+
来源:力扣(LeetCode)
链接:https://leetcode-cn.com/problems/nth-highest-salary
著作权归领扣网络所有。商业转载请联系官方授权,非商业转载请注明出处。
CREATE FUNCTION getNthHighestSalary(N INT) RETURNS INT
BEGIN
RETURN (
# Write your MySQL query statement below.
select distinct Salary 'getNthHighestSalary(2)'
from
(select Salary,dense_rank() over(order by Salary desc) cnt from Employee) a
where a.cnt = N
);
END
178. 分数排名
编写一个 SQL 查询来实现分数排名。
如果两个分数相同,则两个分数排名(Rank)相同。请注意,平分后的下一个名次应该是下一个连续的整数值。换句话说,名次之间不应该有“间隔”。
+----+-------+
| Id | Score |
+----+-------+
| 1 | 3.50 |
| 2 | 3.65 |
| 3 | 4.00 |
| 4 | 3.85 |
| 5 | 4.00 |
| 6 | 3.65 |
+----+-------+
例如,根据上述给定的 Scores 表,你的查询应该返回(按分数从高到低排列):
+-------+------+
| Score | Rank |
+-------+------+
| 4.00 | 1 |
| 4.00 | 1 |
| 3.85 | 2 |
| 3.65 | 3 |
| 3.65 | 3 |
| 3.50 | 4 |
+-------+------+
重要提示:对于 MySQL 解决方案,如果要转义用作列名的保留字,可以在关键字之前和之后使用撇号。例如 `Rank`
来源:力扣(LeetCode)
链接:https://leetcode-cn.com/problems/rank-scores
著作权归领扣网络所有。商业转载请联系官方授权,非商业转载请注明出处。
# Write your MySQL query statement below
select Score,dense_rank() over(order by Score desc) 'Rank'
from Scores
180. 连续出现的数字
表:Logs
+-------------+---------+
| Column Name | Type |
+-------------+---------+
| id | int |
| num | varchar |
+-------------+---------+
id 是这个表的主键。
编写一个 SQL 查询,查找所有至少连续出现三次的数字。
返回的结果表中的数据可以按 任意顺序 排列。
查询结果格式如下面的例子所示:
Logs 表:
+----+-----+
| Id | Num |
+----+-----+
| 1 | 1 |
| 2 | 1 |
| 3 | 1 |
| 4 | 2 |
| 5 | 1 |
| 6 | 2 |
| 7 | 2 |
+----+-----+
Result 表:
+-----------------+
| ConsecutiveNums |
+-----------------+
| 1 |
+-----------------+
1 是唯一连续出现至少三次的数字。
来源:力扣(LeetCode)
链接:https://leetcode-cn.com/problems/consecutive-numbers
著作权归领扣网络所有。商业转载请联系官方授权,非商业转载请注明出处。
# Write your MySQL query statement below
select distinct d.num1 ConsecutiveNums from
(select a.Id,a.Num num1,b.Num num2,c.Num num3
from Logs a,Logs b,Logs c
where a.id = b.id - 1
and a.id = c.id - 2) d
where d.num1 = d.num2
and d.num1 = d.num3
184. 部门工资最高的员工
Employee 表包含所有员工信息,每个员工有其对应的 Id, salary 和 department Id。
+----+-------+--------+--------------+
| Id | Name | Salary | DepartmentId |
+----+-------+--------+--------------+
| 1 | Joe | 70000 | 1 |
| 2 | Jim | 90000 | 1 |
| 3 | Henry | 80000 | 2 |
| 4 | Sam | 60000 | 2 |
| 5 | Max | 90000 | 1 |
+----+-------+--------+--------------+
Department 表包含公司所有部门的信息。
+----+----------+
| Id | Name |
+----+----------+
| 1 | IT |
| 2 | Sales |
+----+----------+
编写一个 SQL 查询,找出每个部门工资最高的员工。对于上述表,您的 SQL 查询应返回以下行(行的顺序无关紧要)。
+------------+----------+--------+
| Department | Employee | Salary |
+------------+----------+--------+
| IT | Max | 90000 |
| IT | Jim | 90000 |
| Sales | Henry | 80000 |
+------------+----------+--------+
解释:
Max 和 Jim 在 IT 部门的工资都是最高的,Henry 在销售部的工资最高。
来源:力扣(LeetCode)
链接:https://leetcode-cn.com/problems/department-highest-salary
著作权归领扣网络所有。商业转载请联系官方授权,非商业转载请注明出处。
# Write your MySQL query statement below
select b.Name Department,a.Name Employee,a.Salary
from Employee a,Department b
where a.DepartmentId = b.Id
and (a.DepartmentId,a.Salary) in (select DepartmentId,max(Salary) from Employee group by DepartmentId)
534. 游戏玩法分析 III
Table: Activity
+--------------+---------+
| Column Name | Type |
+--------------+---------+
| player_id | int |
| device_id | int |
| event_date | date |
| games_played | int |
+--------------+---------+
(player_id,event_date)是此表的主键。
这张表显示了某些游戏的玩家的活动情况。
每一行是一个玩家的记录,他在某一天使用某个设备注销之前登录并玩了很多游戏(可能是 0 )。
编写一个 SQL 查询,同时报告每组玩家和日期,以及玩家到目前为止玩了多少游戏。也就是说,在此日期之前玩家所玩的游戏总数。详细情况请查看示例。
查询结果格式如下所示:
Activity table:
+-----------+-----------+------------+--------------+
| player_id | device_id | event_date | games_played |
+-----------+-----------+------------+--------------+
| 1 | 2 | 2016-03-01 | 5 |
| 1 | 2 | 2016-05-02 | 6 |
| 1 | 3 | 2017-06-25 | 1 |
| 3 | 1 | 2016-03-02 | 0 |
| 3 | 4 | 2018-07-03 | 5 |
+-----------+-----------+------------+--------------+
Result table:
+-----------+------------+---------------------+
| player_id | event_date | games_played_so_far |
+-----------+------------+---------------------+
| 1 | 2016-03-01 | 5 |
| 1 | 2016-05-02 | 11 |
| 1 | 2017-06-25 | 12 |
| 3 | 2016-03-02 | 0 |
| 3 | 2018-07-03 | 5 |
+-----------+------------+---------------------+
对于 ID 为 1 的玩家,2016-05-02 共玩了 5+6=11 个游戏,2017-06-25 共玩了 5+6+1=12 个游戏。
对于 ID 为 3 的玩家,2018-07-03 共玩了 0+5=5 个游戏。
请注意,对于每个玩家,我们只关心玩家的登录日期。
来源:力扣(LeetCode)
链接:https://leetcode-cn.com/problems/game-play-analysis-iii
著作权归领扣网络所有。商业转载请联系官方授权,非商业转载请注明出处。
# Write your MySQL query statement below
select player_id,event_date,
sum(games_played) over(partition by player_id order by event_date) games_played_so_far
from Activity
order by player_id,event_date desc
550. 游戏玩法分析 IV
Table: Activity
+--------------+---------+
| Column Name | Type |
+--------------+---------+
| player_id | int |
| device_id | int |
| event_date | date |
| games_played | int |
+--------------+---------+
(player_id,event_date)是此表的主键。
这张表显示了某些游戏的玩家的活动情况。
每一行是一个玩家的记录,他在某一天使用某个设备注销之前登录并玩了很多游戏(可能是 0)。
编写一个 SQL 查询,报告在首次登录的第二天再次登录的玩家的比率,四舍五入到小数点后两位。换句话说,您需要计算从首次登录日期开始至少连续两天登录的玩家的数量,然后除以玩家总数。
查询结果格式如下所示:
Activity table:
+-----------+-----------+------------+--------------+
| player_id | device_id | event_date | games_played |
+-----------+-----------+------------+--------------+
| 1 | 2 | 2016-03-01 | 5 |
| 1 | 2 | 2016-03-02 | 6 |
| 2 | 3 | 2017-06-25 | 1 |
| 3 | 1 | 2016-03-02 | 0 |
| 3 | 4 | 2018-07-03 | 5 |
+-----------+-----------+------------+--------------+
Result table:
+-----------+
| fraction |
+-----------+
| 0.33 |
+-----------+
只有 ID 为 1 的玩家在第一天登录后才重新登录,所以答案是 1/3 = 0.33
来源:力扣(LeetCode)
链接:https://leetcode-cn.com/problems/game-play-analysis-iv
著作权归领扣网络所有。商业转载请联系官方授权,非商业转载请注明出处。
# Write your MySQL query statement below
select round(sum(case when c.playerb is not null then 1 else 0 end)/
count(distinct c.player_id),2) fraction
from
(select a.*,b.player_id playerb from Activity a left join
(select player_id,min(event_date) first_date from Activity group by player_id) b
on DATEDIFF(a.event_date,b.first_date) = 1
and a.player_id = b.player_id) c
570. 至少有5名直接下属的经理
Employee 表包含所有员工和他们的经理。每个员工都有一个 Id,并且还有一列是经理的 Id。
+------+----------+-----------+----------+
|Id |Name |Department |ManagerId |
+------+----------+-----------+----------+
|101 |John |A |null |
|102 |Dan |A |101 |
|103 |James |A |101 |
|104 |Amy |A |101 |
|105 |Anne |A |101 |
|106 |Ron |B |101 |
+------+----------+-----------+----------+
给定 Employee 表,请编写一个SQL查询来查找至少有5名直接下属的经理。对于上表,您的SQL查询应该返回:
+-------+
| Name |
+-------+
| John |
+-------+
注意:
没有人是自己的下属。
来源:力扣(LeetCode)
链接:https://leetcode-cn.com/problems/managers-with-at-least-5-direct-reports
著作权归领扣网络所有。商业转载请联系官方授权,非商业转载请注明出处。
# Write your MySQL query statement below
select b.name from
(select ManagerId
from Employee
where ManagerId is not null
group by ManagerId
having count(*) >= 5) a,Employee b
where a.ManagerId = b.Id
574. 当选者
表: Candidate
+-----+---------+
| id | Name |
+-----+---------+
| 1 | A |
| 2 | B |
| 3 | C |
| 4 | D |
| 5 | E |
+-----+---------+
表: Vote
+-----+--------------+
| id | CandidateId |
+-----+--------------+
| 1 | 2 |
| 2 | 4 |
| 3 | 3 |
| 4 | 2 |
| 5 | 5 |
+-----+--------------+
id 是自动递增的主键,
CandidateId 是 Candidate 表中的 id.
请编写 sql 语句来找到当选者的名字,上面的例子将返回当选者 B.
+------+
| Name |
+------+
| B |
+------+
注意:
你可以假设没有平局,换言之,最多只有一位当选者。
来源:力扣(LeetCode)
链接:https://leetcode-cn.com/problems/winning-candidate
著作权归领扣网络所有。商业转载请联系官方授权,非商业转载请注明出处。
# Write your MySQL query statement below
select b.Name from
(select CandidateId,count(*) cnt from Vote group by CandidateId) a,Candidate b
where a.CandidateId = b.id
order by a.cnt desc
limit 1
578. 查询回答率最高的问题
从 survey_log 表中获得回答率最高的问题,survey_log 表包含这些列:id, action, question_id, answer_id, q_num, timestamp。
id 表示用户 id;action 有以下几种值:"show","answer","skip";当 action 值为 "answer" 时 answer_id 非空,而 action 值为 "show" 或者 "skip" 时 answer_id 为空;q_num 表示当前会话中问题的编号。
请编写 SQL 查询来找到具有最高回答率的问题。
示例:
输入:
+------+-----------+--------------+------------+-----------+------------+
| id | action | question_id | answer_id | q_num | timestamp |
+------+-----------+--------------+------------+-----------+------------+
| 5 | show | 285 | null | 1 | 123 |
| 5 | answer | 285 | 124124 | 1 | 124 |
| 5 | show | 369 | null | 2 | 125 |
| 5 | skip | 369 | null | 2 | 126 |
+------+-----------+--------------+------------+-----------+------------+
输出:
+-------------+
| survey_log |
+-------------+
| 285 |
+-------------+
解释:
问题 285 的回答率为 1/1,而问题 369 回答率为 0/1,因此输出 285 。
提示:回答率最高的含义是:同一问题编号中回答数占显示数的比例最高。
来源:力扣(LeetCode)
链接:https://leetcode-cn.com/problems/get-highest-answer-rate-question
著作权归领扣网络所有。商业转载请联系官方授权,非商业转载请注明出处。
# Write your MySQL query statement below
select a.question_id survey_log from
(select question_id,
sum(case when action = 'answer' then 1 else 0 end)/
count(distinct q_num) rate
from survey_log
group by question_id) a
order by a.rate desc
limit 1
580. 统计各专业学生人数
一所大学有 2 个数据表,分别是 student 和 department ,这两个表保存着每个专业的学生数据和院系数据。
写一个查询语句,查询 department 表中每个专业的学生人数 (即使没有学生的专业也需列出)。
将你的查询结果按照学生人数降序排列。 如果有两个或两个以上专业有相同的学生数目,将这些部门按照部门名字的字典序从小到大排列。
student 表格如下:
| Column Name | Type |
|--------------|-----------|
| student_id | Integer |
| student_name | String |
| gender | Character |
| dept_id | Integer |
其中, student_id 是学生的学号, student_name 是学生的姓名, gender 是学生的性别, dept_id 是学生所属专业的专业编号。
department 表格如下:
| Column Name | Type |
|-------------|---------|
| dept_id | Integer |
| dept_name | String |
dept_id 是专业编号, dept_name 是专业名字。
这里是一个示例输入:
student 表格:
| student_id | student_name | gender | dept_id |
|------------|--------------|--------|---------|
| 1 | Jack | M | 1 |
| 2 | Jane | F | 1 |
| 3 | Mark | M | 2 |
department 表格:
| dept_id | dept_name |
|---------|-------------|
| 1 | Engineering |
| 2 | Science |
| 3 | Law |
示例输出为:
| dept_name | student_number |
|-------------|----------------|
| Engineering | 2 |
| Science | 1 |
| Law | 0 |
来源:力扣(LeetCode)
链接:https://leetcode-cn.com/problems/count-student-number-in-departments
著作权归领扣网络所有。商业转载请联系官方授权,非商业转载请注明出处。
# Write your MySQL query statement below
select * from
(select a.dept_name,
count(b.student_id) student_number
from department a left join student b
on a.dept_id = b.dept_id
group by a.dept_name) c
order by student_number desc,dept_name
585. 2016年的投资
写一个查询语句,将 2016 年 (TIV_2016) 所有成功投资的金额加起来,保留 2 位小数。
对于一个投保人,他在 2016 年成功投资的条件是:
他在 2015 年的投保额 (TIV_2015) 至少跟一个其他投保人在 2015 年的投保额相同。
他所在的城市必须与其他投保人都不同(也就是说维度和经度不能跟其他任何一个投保人完全相同)。
输入格式:
表 insurance 格式如下:
| Column Name | Type |
|-------------|---------------|
| PID | INTEGER(11) |
| TIV_2015 | NUMERIC(15,2) |
| TIV_2016 | NUMERIC(15,2) |
| LAT | NUMERIC(5,2) |
| LON | NUMERIC(5,2) |
PID 字段是投保人的投保编号, TIV_2015 是该投保人在2015年的总投保金额, TIV_2016 是该投保人在2016年的投保金额, LAT 是投保人所在城市的维度, LON 是投保人所在城市的经度。
样例输入
| PID | TIV_2015 | TIV_2016 | LAT | LON |
|-----|----------|----------|-----|-----|
| 1 | 10 | 5 | 10 | 10 |
| 2 | 20 | 20 | 20 | 20 |
| 3 | 10 | 30 | 20 | 20 |
| 4 | 10 | 40 | 40 | 40 |
样例输出
| TIV_2016 |
|----------|
| 45.00 |
解释
就如最后一个投保人,第一个投保人同时满足两个条件:
1. 他在 2015 年的投保金额 TIV_2015 为 '10' ,与第三个和第四个投保人在 2015 年的投保金额相同。
2. 他所在城市的经纬度是独一无二的。
第二个投保人两个条件都不满足。他在 2015 年的投资 TIV_2015 与其他任何投保人都不相同。
且他所在城市的经纬度与第三个投保人相同。基于同样的原因,第三个投保人投资失败。
所以返回的结果是第一个投保人和最后一个投保人的 TIV_2016 之和,结果是 45 。
来源:力扣(LeetCode)
链接:https://leetcode-cn.com/problems/investments-in-2016
著作权归领扣网络所有。商业转载请联系官方授权,非商业转载请注明出处。
# Write your MySQL query statement below
select round(sum(TIV_2016),2) TIV_2016
from insurance a
where exists(select * from insurance b where a.pid <> b.pid and a.TIV_2015 = b.TIV_2015)
and not exists(select * from insurance c where a.pid <> c.pid and a.LAT = c.LAT and a.LON = c.LON)
602. 好友申请 II :谁有最多的好友
在 Facebook 或者 Twitter 这样的社交应用中,人们经常会发好友申请也会收到其他人的好友申请。
表 request_accepted 存储了所有好友申请通过的数据记录,其中, requester_id 和 accepter_id 都是用户的编号。
| requester_id | accepter_id | accept_date|
|--------------|-------------|------------|
| 1 | 2 | 2016_06-03 |
| 1 | 3 | 2016-06-08 |
| 2 | 3 | 2016-06-08 |
| 3 | 4 | 2016-06-09 |
写一个查询语句,求出谁拥有最多的好友和他拥有的好友数目。对于上面的样例数据,结果为:
| id | num |
|----|-----|
| 3 | 3 |
注意:
保证拥有最多好友数目的只有 1 个人。
好友申请只会被接受一次,所以不会有 requester_id 和 accepter_id 值都相同的重复记录。
解释:
编号为 '3' 的人是编号为 '1','2' 和 '4' 的好友,所以他总共有 3 个好友,比其他人都多。
来源:力扣(LeetCode)
链接:https://leetcode-cn.com/problems/friend-requests-ii-who-has-the-most-friends
著作权归领扣网络所有。商业转载请联系官方授权,非商业转载请注明出处。
# Write your MySQL query statement below
select * from
(select id,count(*) num from
(select requester_id id from request_accepted
union all
select accepter_id id from request_accepted) a
group by id) b
order by b.num desc
limit 1
608. 树节点
给定一个表 tree,id 是树节点的编号, p_id 是它父节点的 id 。
+----+------+
| id | p_id |
+----+------+
| 1 | null |
| 2 | 1 |
| 3 | 1 |
| 4 | 2 |
| 5 | 2 |
+----+------+
树中每个节点属于以下三种类型之一:
叶子:如果这个节点没有任何孩子节点。
根:如果这个节点是整棵树的根,即没有父节点。
内部节点:如果这个节点既不是叶子节点也不是根节点。
写一个查询语句,输出所有节点的编号和节点的类型,并将结果按照节点编号排序。上面样例的结果为:
+----+------+
| id | Type |
+----+------+
| 1 | Root |
| 2 | Inner|
| 3 | Leaf |
| 4 | Leaf |
| 5 | Leaf |
+----+------+
解释
节点 '1' 是根节点,因为它的父节点是 NULL ,同时它有孩子节点 '2' 和 '3' 。
节点 '2' 是内部节点,因为它有父节点 '1' ,也有孩子节点 '4' 和 '5' 。
节点 '3', '4' 和 '5' 都是叶子节点,因为它们都有父节点同时没有孩子节点。
样例中树的形态如下:
1
/ \
2 3
/ \
4 5
注意
如果树中只有一个节点,你只需要输出它的根属性
来源:力扣(LeetCode)
链接:https://leetcode-cn.com/problems/tree-node
著作权归领扣网络所有。商业转载请联系官方授权,非商业转载请注明出处。
# Write your MySQL query statement below
select * from
(select distinct id,'Root' Type from tree where p_id is null
union
select distinct id,'Inner' Type from tree a where a.p_id is not null and exists(select * from tree b where a.id = b.p_id)
union
select distinct id,'Leaf' Type from tree a where a.p_id is not null and not exists(select * from tree b where a.id = b.p_id)) c
order by c.id
612. 平面上的最近距离
表 point_2d 保存了所有点(多于 2 个点)的坐标 (x,y) ,这些点在平面上两两不重合。
写一个查询语句找到两点之间的最近距离,保留 2 位小数。
| x | y |
|----|----|
| -1 | -1 |
| 0 | 0 |
| -1 | -2 |
最近距离在点 (-1,-1) 和(-1,2) 之间,距离为 1.00 。所以输出应该为:
| shortest |
|----------|
| 1.00 |
注意:任意点之间的最远距离小于 10000 。
来源:力扣(LeetCode)
链接:https://leetcode-cn.com/problems/shortest-distance-in-a-plane
著作权归领扣网络所有。商业转载请联系官方授权,非商业转载请注明出处。
# Write your MySQL query statement below
select round(min(distance),2) shortest from
(select sqrt((a.x-b.x)*(a.x-b.x)+(a.y-b.y)*(a.y-b.y)) distance
from point_2d a,point_2d b
where (a.x,a.y) <> (b.x,b.y)) c
614. 二级关注者
在 facebook 中,表 follow 会有 2 个字段: followee, follower ,分别表示被关注者和关注者。
请写一个 sql 查询语句,对每一个关注者,查询关注他的关注者的数目。
比方说:
+-------------+------------+
| followee | follower |
+-------------+------------+
| A | B |
| B | C |
| B | D |
| D | E |
+-------------+------------+
应该输出:
+-------------+------------+
| follower | num |
+-------------+------------+
| B | 2 |
| D | 1 |
+-------------+------------+
解释:
B 和 D 都在在 follower 字段中出现,作为被关注者,B 被 C 和 D 关注,D 被 E 关注。A 不在 follower 字段内,所以A不在输出列表中。
注意:
被关注者永远不会被他 / 她自己关注。
将结果按照字典序返回。
来源:力扣(LeetCode)
链接:https://leetcode-cn.com/problems/second-degree-follower
著作权归领扣网络所有。商业转载请联系官方授权,非商业转载请注明出处。
# Write your MySQL query statement below
select a.follower,count(distinct b.follower) num
from follow a,follow b
where a.follower = b.followee
group by a.follower
order by a.follower
626. 换座位
小美是一所中学的信息科技老师,她有一张 seat 座位表,平时用来储存学生名字和与他们相对应的座位 id。
其中纵列的 id 是连续递增的
小美想改变相邻俩学生的座位。
你能不能帮她写一个 SQL query 来输出小美想要的结果呢?
示例:
+---------+---------+
| id | student |
+---------+---------+
| 1 | Abbot |
| 2 | Doris |
| 3 | Emerson |
| 4 | Green |
| 5 | Jeames |
+---------+---------+
假如数据输入的是上表,则输出结果如下:
+---------+---------+
| id | student |
+---------+---------+
| 1 | Doris |
| 2 | Abbot |
| 3 | Green |
| 4 | Emerson |
| 5 | Jeames |
+---------+---------+
注意:
如果学生人数是奇数,则不需要改变最后一个同学的座位。
来源:力扣(LeetCode)
链接:https://leetcode-cn.com/problems/exchange-seats
著作权归领扣网络所有。商业转载请联系官方授权,非商业转载请注明出处。
# Write your MySQL query statement below
select * from
(select id+1 id,student from seat
where id % 2 = 1
and id <> (select max(id) from seat)
union
select id-1 id,student from seat
where id % 2 = 0
union
select id,student from seat
where id % 2 = 1
and id = (select max(id) from seat)) a
order by a.id
1045. 买下所有产品的客户
Customer 表:
+-------------+---------+
| Column Name | Type |
+-------------+---------+
| customer_id | int |
| product_key | int |
+-------------+---------+
product_key 是 Customer 表的外键。
Product 表:
+-------------+---------+
| Column Name | Type |
+-------------+---------+
| product_key | int |
+-------------+---------+
product_key 是这张表的主键。
写一条 SQL 查询语句,从 Customer 表中查询购买了 Product 表中所有产品的客户的 id。
示例:
Customer 表:
+-------------+-------------+
| customer_id | product_key |
+-------------+-------------+
| 1 | 5 |
| 2 | 6 |
| 3 | 5 |
| 3 | 6 |
| 1 | 6 |
+-------------+-------------+
Product 表:
+-------------+
| product_key |
+-------------+
| 5 |
| 6 |
+-------------+
Result 表:
+-------------+
| customer_id |
+-------------+
| 1 |
| 3 |
+-------------+
购买了所有产品(5 和 6)的客户的 id 是 1 和 3 。
来源:力扣(LeetCode)
链接:https://leetcode-cn.com/problems/customers-who-bought-all-products
著作权归领扣网络所有。商业转载请联系官方授权,非商业转载请注明出处。
# Write your MySQL query statement below
select customer_id from Customer group by customer_id having count(distinct product_key) = (select count(*) from Product)
1070. 产品销售分析 III
销售表 Sales:
+-------------+-------+
| Column Name | Type |
+-------------+-------+
| sale_id | int |
| product_id | int |
| year | int |
| quantity | int |
| price | int |
+-------------+-------+
sale_id 是此表的主键。
product_id 是产品表的外键。
请注意,价格是按每单位计的。
产品表 Product:
+--------------+---------+
| Column Name | Type |
+--------------+---------+
| product_id | int |
| product_name | varchar |
+--------------+---------+
product_id 是此表的主键。
编写一个 SQL 查询,选出每个销售产品的 第一年 的 产品 id、年份、数量 和 价格。
查询结果格式如下:
Sales table:
+---------+------------+------+----------+-------+
| sale_id | product_id | year | quantity | price |
+---------+------------+------+----------+-------+
| 1 | 100 | 2008 | 10 | 5000 |
| 2 | 100 | 2009 | 12 | 5000 |
| 7 | 200 | 2011 | 15 | 9000 |
+---------+------------+------+----------+-------+
Product table:
+------------+--------------+
| product_id | product_name |
+------------+--------------+
| 100 | Nokia |
| 200 | Apple |
| 300 | Samsung |
+------------+--------------+
Result table:
+------------+------------+----------+-------+
| product_id | first_year | quantity | price |
+------------+------------+----------+-------+
| 100 | 2008 | 10 | 5000 |
| 200 | 2011 | 15 | 9000 |
+------------+------------+----------+-------+
来源:力扣(LeetCode)
链接:https://leetcode-cn.com/problems/product-sales-analysis-iii
著作权归领扣网络所有。商业转载请联系官方授权,非商业转载请注明出处。
# Write your MySQL query statement below
select a.product_id,a.year first_year,a.quantity,a.price
from Sales a where (a.product_id,a.year) in (select b.product_id,min(b.year) from Sales b group by b.product_id )
1077. 项目员工 III
项目表 Project:
+-------------+---------+
| Column Name | Type |
+-------------+---------+
| project_id | int |
| employee_id | int |
+-------------+---------+
(project_id, employee_id) 是这个表的主键
employee_id 是员工表 Employee 的外键
员工表 Employee:
+------------------+---------+
| Column Name | Type |
+------------------+---------+
| employee_id | int |
| name | varchar |
| experience_years | int |
+------------------+---------+
employee_id 是这个表的主键
写 一个 SQL 查询语句,报告在每一个项目中经验最丰富的雇员是谁。如果出现经验年数相同的情况,请报告所有具有最大经验年数的员工。
查询结果格式在以下示例中:
Project 表:
+-------------+-------------+
| project_id | employee_id |
+-------------+-------------+
| 1 | 1 |
| 1 | 2 |
| 1 | 3 |
| 2 | 1 |
| 2 | 4 |
+-------------+-------------+
Employee 表:
+-------------+--------+------------------+
| employee_id | name | experience_years |
+-------------+--------+------------------+
| 1 | Khaled | 3 |
| 2 | Ali | 2 |
| 3 | John | 3 |
| 4 | Doe | 2 |
+-------------+--------+------------------+
Result 表:
+-------------+---------------+
| project_id | employee_id |
+-------------+---------------+
| 1 | 1 |
| 1 | 3 |
| 2 | 1 |
+-------------+---------------+
employee_id 为 1 和 3 的员工在 project_id 为 1 的项目中拥有最丰富的经验。在 project_id 为 2 的项目中,employee_id 为 1 的员工拥有最丰富的经验。
来源:力扣(LeetCode)
链接:https://leetcode-cn.com/problems/project-employees-iii
著作权归领扣网络所有。商业转载请联系官方授权,非商业转载请注明出处。
# Write your MySQL query statement below
select project_id,employee_id from
(select a.*,b.experience_years,
dense_rank() over(partition by a.project_id order by b.experience_years desc) cnt
from Project a,Employee b
where a.employee_id = b.employee_id) c
where c.cnt = 1
1098. 小众书籍
书籍表 Books:
+----------------+---------+
| Column Name | Type |
+----------------+---------+
| book_id | int |
| name | varchar |
| available_from | date |
+----------------+---------+
book_id 是这个表的主键。
订单表 Orders:
+----------------+---------+
| Column Name | Type |
+----------------+---------+
| order_id | int |
| book_id | int |
| quantity | int |
| dispatch_date | date |
+----------------+---------+
order_id 是这个表的主键。
book_id 是 Books 表的外键。
你需要写一段 SQL 命令,筛选出过去一年中订单总量 少于10本 的 书籍 。
注意:不考虑 上架(available from)距今 不满一个月 的书籍。并且 假设今天是 2019-06-23 。
下面是样例输出结果:
Books 表:
+---------+--------------------