vf的device和driver的匹配

vf和pf一样，都有device和driver。pf的device是从bios中通过dsdt表传递过来的，但是vf的device却是在ixgbe的probe函数ixgbe_probe中会调用下面的code来增加vf的device
#ifdef CONFIG_PCI_IOV
	/* SR-IOV not supported on the 82598 */
	if (adapter->hw.mac.type == ixgbe_mac_82598EB)
		goto skip_sriov;
	/* Mailbox */
	ixgbe_init_mbx_params_pf(hw);
	hw->mbx.ops = ii->mbx_ops;
	pci_sriov_set_totalvfs(pdev, IXGBE_MAX_VFS_DRV_LIMIT);
	ixgbe_enable_sriov(adapter, max_vfs);
#endif
核心函数是ixgbe_enable_sriov->pci_enable_sriov->pci_iov_add_virtfn
int pci_iov_add_virtfn(struct pci_dev *dev, int id, int reset)
{
	int i;
	int rc = -ENOMEM;
	u64 size;
	char buf[VIRTFN_ID_LEN];
	struct pci_dev *virtfn;
	struct resource *res;
	struct pci_sriov *iov = dev->sriov;
	struct pci_bus *bus;

	bus = virtfn_add_bus(dev->bus, pci_iov_virtfn_bus(dev, id));
	if (!bus)
		goto failed;
//申请struct pci_dev *virtfn;
	virtfn = pci_alloc_dev(bus);
	if (!virtfn)
		goto failed0;

	virtfn->devfn = pci_iov_virtfn_devfn(dev, id);
	virtfn->vendor = dev->vendor;
	pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_DID, &virtfn->device);
	rc = pci_setup_device(virtfn);
	if (rc)
		goto failed0;

	virtfn->dev.parent = dev->dev.parent;
	virtfn->physfn = pci_dev_get(dev);
	virtfn->is_virtfn = 1;
	virtfn->multifunction = 0;

	
//添加device，最终在pci_device_add中调用device_add来添加device
	pci_device_add(virtfn, virtfn->bus);

	pci_bus_add_device(virtfn);
	sprintf(buf, "virtfn%u", id);
	rc = sysfs_create_link(&dev->dev.kobj, &virtfn->dev.kobj, buf);
	if (rc)
		goto failed1;
	rc = sysfs_create_link(&virtfn->dev.kobj, &dev->dev.kobj, "physfn");
	if (rc)
		goto failed2;

	kobject_uevent(&virtfn->dev.kobj, KOBJ_CHANGE);

	return 0;


	return rc;
}
到这里vf的device 已经有了，vf的driver是在net/ethernet/intel/ixgbevf中，其入口函数是在ixgbevf_main.c中
前面添加device后，就会触发ixgbevf_driver的probe函数
static int __init ixgbevf_init_module(void)
{
	pr_info("%s - version %s\n", ixgbevf_driver_string,
		ixgbevf_driver_version);

	pr_info("%s\n", ixgbevf_copyright);
	ixgbevf_wq = create_singlethread_workqueue(ixgbevf_driver_name);
	if (!ixgbevf_wq) {
		pr_err("%s: Failed to create workqueue\n", ixgbevf_driver_name);
		return -ENOMEM;
	}

	return pci_register_driver(&ixgbevf_driver);
}
ixgbevf_probe 函数就和正常的probe函数类似