Android Camera CameraHal.cpp 分析
作为上层和底层的中转站,hal层在android中起到的作用不言而喻,针对camera的研究已经有一段时间了,这里自己还是决定静下心来好好的分析一下CameraHal.cpp这里的代码,
对自己更好的理解hal与上层和底层的交互作用不可小觑,特别对理解hal与kernel driver的交互过程作用很大
不多说废话了,开始今天的主题
我们首先从CameraHal的初始化,那么他是从哪里开始化的呢?这里之前的文章中已经有过,只是没有重点介绍,这里还是说一下吧
是在camera最初open的时候会调用到camerahal_module.cpp中的以下方法进行初始化的
- /*******************************************************************
- * implementation of camera_module functions
- *******************************************************************/
-
- /* open device handle to one of the cameras
- *
- * assume camera service will keep singleton of each camera
- * so this function will always only be called once per camera instance
- */
-
- int camera_device_open(const hw_module_t* module, const char* name,
- hw_device_t** device)
- {
- int rv = 0;
- int num_cameras = 0;
- int cameraid;
- ti_camera_device_t* camera_device = NULL;
- camera_device_ops_t* camera_ops = NULL;
- android::CameraHal* camera = NULL;
- android::CameraProperties::Properties* properties = NULL;
-
- android::Mutex::Autolock lock(gCameraHalDeviceLock);
-
- LOGI("camera_device open");
-
- if (name != NULL) {
- cameraid = atoi(name);
- num_cameras = gCameraProperties.camerasSupported();
-
- if(cameraid > num_cameras)
- {
- LOGE("camera service provided cameraid out of bounds, "
- "cameraid = %d, num supported = %d",
- cameraid, num_cameras);
- rv = -EINVAL;
- goto fail;
- }
-
- if(gCamerasOpen >= MAX_SIMUL_CAMERAS_SUPPORTED)
- {
- LOGE("maximum number of cameras already open");
- rv = -ENOMEM;
- goto fail;
- }
-
- camera_device = (ti_camera_device_t*)malloc(sizeof(*camera_device));
- if(!camera_device)
- {
- LOGE("camera_device allocation fail");
- rv = -ENOMEM;
- goto fail;
- }
-
- camera_ops = (camera_device_ops_t*)malloc(sizeof(*camera_ops));
- if(!camera_ops)
- {
- LOGE("camera_ops allocation fail");
- rv = -ENOMEM;
- goto fail;
- }
-
- memset(camera_device, 0, sizeof(*camera_device));
- memset(camera_ops, 0, sizeof(*camera_ops));
-
- camera_device->base.common.tag = HARDWARE_DEVICE_TAG;
- camera_device->base.common.version = 0;
- camera_device->base.common.module = (hw_module_t *)(module);
- camera_device->base.common.close = camera_device_close;
- camera_device->base.ops = camera_ops;
-
- camera_ops->set_preview_window = camera_set_preview_window;
- camera_ops->set_callbacks = camera_set_callbacks;
- camera_ops->enable_msg_type = camera_enable_msg_type;
- camera_ops->disable_msg_type = camera_disable_msg_type;
- camera_ops->msg_type_enabled = camera_msg_type_enabled;
- camera_ops->start_preview = camera_start_preview;
- camera_ops->stop_preview = camera_stop_preview;
- camera_ops->preview_enabled = camera_preview_enabled;
- camera_ops->store_meta_data_in_buffers = camera_store_meta_data_in_buffers;
- camera_ops->start_recording = camera_start_recording;
- camera_ops->stop_recording = camera_stop_recording;
- camera_ops->recording_enabled = camera_recording_enabled;
- camera_ops->release_recording_frame = camera_release_recording_frame;
- camera_ops->auto_focus = camera_auto_focus;
- camera_ops->cancel_auto_focus = camera_cancel_auto_focus;
- camera_ops->take_picture = camera_take_picture;
- camera_ops->cancel_picture = camera_cancel_picture;
- camera_ops->set_parameters = camera_set_parameters;
- camera_ops->get_parameters = camera_get_parameters;
- camera_ops->put_parameters = camera_put_parameters;
- camera_ops->send_command = camera_send_command;
- camera_ops->release = camera_release;
- camera_ops->dump = camera_dump;
-
- *device = &camera_device->base.common;
-
- // -------- TI specific stuff --------
-
- camera_device->cameraid = cameraid;
-
- if(gCameraProperties.getProperties(cameraid, &properties) < 0)
- {
- LOGE("Couldn't get camera properties");
- rv = -ENOMEM;
- goto fail;
- }
-
****************重点就在这里了****************
- camera = new android::CameraHal(cameraid);
-
- if(!camera)
- {
- LOGE("Couldn't create instance of CameraHal class");
- rv = -ENOMEM;
- goto fail;
- }
-
- if(properties && (camera->initialize(properties) != android::NO_ERROR))
- {
- LOGE("Couldn't initialize camera instance");
- rv = -ENODEV;
- goto fail;
- }
-
- gCameraHals[cameraid] = camera;
- gCamerasOpen++;
-
- }
-
- return rv;
-
- fail:
- if(camera_device) {
- free(camera_device);
- camera_device = NULL;
- }
- if(camera_ops) {
- free(camera_ops);
- camera_ops = NULL;
- }
- if(camera) {
- delete camera;
- camera = NULL;
- }
- *device = NULL;
- return rv;
- }
现在我们就开始看看camerahal的initialize方法的实现
- /**
- @brief Initialize the Camera HAL
-
- Creates CameraAdapter, AppCallbackNotifier, DisplayAdapter and MemoryManager
-
- @param None
- @return NO_ERROR - On success
- NO_MEMORY - On failure to allocate memory for any of the objects
- @remarks Camera Hal internal function
-
- */
-
- status_t CameraHal::initialize(CameraProperties::Properties* properties)
- {
- LOG_FUNCTION_NAME;
-
- int sensor_index = 0;
- const char* sensor_name = NULL;
-
- ///Initialize the event mask used for registering an event provider for AppCallbackNotifier
- ///Currently, registering all events as to be coming from CameraAdapter
- int32_t eventMask = CameraHalEvent::ALL_EVENTS;
-
- // Get my camera properties
- mCameraProperties = properties;
-
- if(!mCameraProperties)
- {
- goto fail_loop;
- }
-
- // Dump the properties of this Camera
- // will only print if DEBUG macro is defined
- mCameraProperties->dump();
-
- if (strcmp(CameraProperties::DEFAULT_VALUE, mCameraProperties->get(CameraProperties::CAMERA_SENSOR_INDEX)) != 0 )
- {
- sensor_index = atoi(mCameraProperties->get(CameraProperties::CAMERA_SENSOR_INDEX));
- }
-
- if (strcmp(CameraProperties::DEFAULT_VALUE, mCameraProperties->get(CameraProperties::CAMERA_NAME)) != 0 ) {
- sensor_name = mCameraProperties->get(CameraProperties::CAMERA_NAME);
- }
- CAMHAL_LOGDB("Sensor index= %d; Sensor name= %s", sensor_index, sensor_name);
1.这里很重要*******************************************************************************
这里做一个判断决定我们是使用V4LCameraAdapter还是OMXCameraAdapter
接下来将要重点学习OMX机制,这篇文章我们假设走else分支
这里做一个判断决定我们是使用V4LCameraAdapter还是OMXCameraAdapter
接下来将要重点学习OMX机制,这篇文章我们假设走else分支
- if (strcmp(sensor_name, V4L_CAMERA_NAME_USB) == 0) {
- #ifdef V4L_CAMERA_ADAPTER
- mCameraAdapter = V4LCameraAdapter_Factory(sensor_index);
- #endif
- }
- else {
- #ifdef OMX_CAMERA_ADAPTER
- mCameraAdapter = OMXCameraAdapter_Factory(sensor_index);
- #endif
- }
-
- if ( ( NULL == mCameraAdapter ) || (mCameraAdapter->initialize(properties)!=NO_ERROR))
- {
- CAMHAL_LOGEA("Unable to create or initialize CameraAdapter");
- mCameraAdapter = NULL;
- goto fail_loop;
- }
-
- mCameraAdapter->incStrong(mCameraAdapter);
- mCameraAdapter->registerImageReleaseCallback(releaseImageBuffers, (void *) this);
- mCameraAdapter->registerEndCaptureCallback(endImageCapture, (void *)this);
2.这里很重要*****************************************************************************
这里实例化一个AppCallbackNotifier,并且调用initialize方法进行初始化
这里实例化一个AppCallbackNotifier,并且调用initialize方法进行初始化
- if(!mAppCallbackNotifier.get())
- {
- /// Create the callback notifier
- mAppCallbackNotifier = new AppCallbackNotifier();
- if( ( NULL == mAppCallbackNotifier.get() ) || ( mAppCallbackNotifier->initialize() != NO_ERROR))
- {
- CAMHAL_LOGEA("Unable to create or initialize AppCallbackNotifier");
- goto fail_loop;
- }
- }
3.这里很重要*****************************************************************************
这里实例化一个MemoryManager,并且调用initialize方法进行初始化,以及其他一些set 或者初始化
这里实例化一个MemoryManager,并且调用initialize方法进行初始化,以及其他一些set 或者初始化
- if(!mMemoryManager.get())
- {
- /// Create Memory Manager
- mMemoryManager = new MemoryManager();
- if( ( NULL == mMemoryManager.get() ) || ( mMemoryManager->initialize() != NO_ERROR))
- {
- CAMHAL_LOGEA("Unable to create or initialize MemoryManager");
- goto fail_loop;
- }
- }
-
- ///Setup the class dependencies...
-
- ///AppCallbackNotifier has to know where to get the Camera frames and the events like auto focus lock etc from.
- ///CameraAdapter is the one which provides those events
- ///Set it as the frame and event providers for AppCallbackNotifier
- ///@remarks setEventProvider API takes in a bit mask of events for registering a provider for the different events
- /// That way, if events can come from DisplayAdapter in future, we will be able to add it as provider
- /// for any event
- mAppCallbackNotifier->setEventProvider(eventMask, mCameraAdapter);
- mAppCallbackNotifier->setFrameProvider(mCameraAdapter);
-
- ///Any dynamic errors that happen during the camera use case has to be propagated back to the application
- ///via CAMERA_MSG_ERROR. AppCallbackNotifier is the class that notifies such errors to the application
- ///Set it as the error handler for CameraAdapter
- mCameraAdapter->setErrorHandler(mAppCallbackNotifier.get());
-
- ///Start the callback notifier
- if(mAppCallbackNotifier->start() != NO_ERROR)
- {
- CAMHAL_LOGEA("Couldn't start AppCallbackNotifier");
- goto fail_loop;
- }
-
- CAMHAL_LOGDA("Started AppCallbackNotifier..");
- mAppCallbackNotifier->setMeasurements(mMeasurementEnabled);
4.这里很重要*****************************************************************************
这里进行camera参数的设置
这里进行camera参数的设置
- ///Initialize default parameters
- initDefaultParameters();
-
- if ( setParameters(mParameters) != NO_ERROR )
- {
- CAMHAL_LOGEA("Failed to set default parameters?!");
- }
5.这里很重要*****************************************************************************
这里实例化一个SensorListener,并且调用initialize方法进行初始化,以及其他一些初始设置
这里实例化一个SensorListener,并且调用initialize方法进行初始化,以及其他一些初始设置
- // register for sensor events
- mSensorListener = new SensorListener();
- if (mSensorListener.get()) {
- if (mSensorListener->initialize() == NO_ERROR) {
- mSensorListener->setCallbacks(orientation_cb, this);
- mSensorListener->enableSensor(SensorListener::SENSOR_ORIENTATION);
- } else {
- CAMHAL_LOGEA("Error initializing SensorListener. not fatal, continuing");
- mSensorListener.clear();
- mSensorListener = NULL;
- }
- }
-
- LOG_FUNCTION_NAME_EXIT;
-
- return NO_ERROR;
-
- fail_loop:
-
- ///Free up the resources because we failed somewhere up
- deinitialize();
- LOG_FUNCTION_NAME_EXIT;
-
- return NO_MEMORY;
-
- }
一.OMXCameraAdapter的实例化和初始化
首先看一下OMXCameraAdapter的默认构造函数
- OMXCameraAdapter::OMXCameraAdapter(size_t sensor_index)
- {
- LOG_FUNCTION_NAME;
-
- mOmxInitialized = false;
- mComponentState = OMX_StateInvalid;
- mSensorIndex = sensor_index;
- mPictureRotation = 0;
- // Initial values
- mTimeSourceDelta = 0;
- onlyOnce = true;
- mDccData.pData = NULL;
-
- mInitSem.Create(0);
- mFlushSem.Create(0);
- mUsePreviewDataSem.Create(0);
- mUsePreviewSem.Create(0);
- mUseCaptureSem.Create(0);
- mUseReprocessSem.Create(0);
- mStartPreviewSem.Create(0);
- mStopPreviewSem.Create(0);
- mStartCaptureSem.Create(0);
- mStopCaptureSem.Create(0);
- mStopReprocSem.Create(0);
- mSwitchToLoadedSem.Create(0);
- mCaptureSem.Create(0);
-
- mSwitchToExecSem.Create(0);
-
- mCameraAdapterParameters.mHandleComp = 0;
-
- mUserSetExpLock = OMX_FALSE;
- mUserSetWbLock = OMX_FALSE;
-
- mFramesWithDucati = 0;
- mFramesWithDisplay = 0;
- mFramesWithEncoder = 0;
-
- #ifdef CAMERAHAL_OMX_PROFILING
-
- mDebugProfile = 0;
-
- #endif
-
- LOG_FUNCTION_NAME_EXIT;
- }
- /*--------------------Camera Adapter Class STARTS here-----------------------------*/
-
- status_t OMXCameraAdapter::initialize(CameraProperties::Properties* caps)
- {
- LOG_FUNCTION_NAME;
-
- char value[PROPERTY_VALUE_MAX];
- const char *mountOrientationString = NULL;
-
- property_get("debug.camera.showfps", value, "0");
- mDebugFps = atoi(value);
- property_get("debug.camera.framecounts", value, "0");
- mDebugFcs = atoi(value);
-
- #ifdef CAMERAHAL_OMX_PROFILING
-
- property_get("debug.camera.profile", value, "0");
- mDebugProfile = atoi(value);
-
- #endif
-
- TIMM_OSAL_ERRORTYPE osalError = OMX_ErrorNone;
- OMX_ERRORTYPE eError = OMX_ErrorNone;
- status_t ret = NO_ERROR;
-
- mLocalVersionParam.s.nVersionMajor = 0x1;
- mLocalVersionParam.s.nVersionMinor = 0x1;
- mLocalVersionParam.s.nRevision = 0x0 ;
- mLocalVersionParam.s.nStep = 0x0;
-
- mPending3Asettings = 0;//E3AsettingsAll;
- mPendingCaptureSettings = 0;
- mPendingPreviewSettings = 0;
-
- if ( 0 != mInitSem.Count() )
- {
- CAMHAL_LOGEB("Error mInitSem semaphore count %d", mInitSem.Count());
- LOG_FUNCTION_NAME_EXIT;
- return NO_INIT;
- }
-
- ///Update the preview and image capture port indexes
- mCameraAdapterParameters.mPrevPortIndex = OMX_CAMERA_PORT_VIDEO_OUT_PREVIEW;
- // temp changed in order to build OMX_CAMERA_PORT_VIDEO_OUT_IMAGE;
- mCameraAdapterParameters.mImagePortIndex = OMX_CAMERA_PORT_IMAGE_OUT_IMAGE;
- mCameraAdapterParameters.mMeasurementPortIndex = OMX_CAMERA_PORT_VIDEO_OUT_MEASUREMENT;
- //currently not supported use preview port instead
- mCameraAdapterParameters.mVideoPortIndex = OMX_CAMERA_PORT_VIDEO_OUT_VIDEO;
- mCameraAdapterParameters.mVideoInPortIndex = OMX_CAMERA_PORT_VIDEO_IN_VIDEO;
- // 1.OMX_Init
- eError = OMX_Init();
- if (eError != OMX_ErrorNone) {
- CAMHAL_LOGEB("OMX_Init() failed, error: 0x%x", eError);
- return ErrorUtils::omxToAndroidError(eError);
- }
- mOmxInitialized = true;
-
- // 2.Initialize the callback handles
- OMX_CALLBACKTYPE callbacks;
- callbacks.EventHandler = android::OMXCameraAdapterEventHandler;
- callbacks.EmptyBufferDone = android::OMXCameraAdapterEmptyBufferDone;
- callbacks.FillBufferDone = android::OMXCameraAdapterFillBufferDone;
-
- // 3.Get the handle to the OMX Component
- eError = OMXCameraAdapter::OMXCameraGetHandle(&mCameraAdapterParameters.mHandleComp, this, callbacks);
- if(eError != OMX_ErrorNone) {
- CAMHAL_LOGEB("OMX_GetHandle -0x%x", eError);
- }
- GOTO_EXIT_IF((eError != OMX_ErrorNone), eError);
-
- mComponentState = OMX_StateLoaded;
-
- CAMHAL_LOGVB("OMX_GetHandle -0x%x sensor_index = %lu", eError, mSensorIndex);
- initDccFileDataSave(&mCameraAdapterParameters.mHandleComp, mCameraAdapterParameters.mPrevPortIndex);
-
- eError = OMX_SendCommand(mCameraAdapterParameters.mHandleComp,
- OMX_CommandPortDisable,
- OMX_ALL,
- NULL);
-
- if(eError != OMX_ErrorNone) {
- CAMHAL_LOGEB("OMX_SendCommand(OMX_CommandPortDisable) -0x%x", eError);
- }
- GOTO_EXIT_IF((eError != OMX_ErrorNone), eError);
-
- // 4.Register for port enable event
- ret = RegisterForEvent(mCameraAdapterParameters.mHandleComp,
- OMX_EventCmdComplete,
- OMX_CommandPortEnable,
- mCameraAdapterParameters.mPrevPortIndex,
- mInitSem);
- if(ret != NO_ERROR) {
- CAMHAL_LOGEB("Error in registering for event %d", ret);
- goto EXIT;
- }
-
- // 5.Enable PREVIEW Port
- eError = OMX_SendCommand(mCameraAdapterParameters.mHandleComp,
- OMX_CommandPortEnable,
- mCameraAdapterParameters.mPrevPortIndex,
- NULL);
- if(eError != OMX_ErrorNone) {
- CAMHAL_LOGEB("OMX_SendCommand(OMX_CommandPortEnable) -0x%x", eError);
- }
- GOTO_EXIT_IF((eError!=OMX_ErrorNone), eError);
-
- // 6.Wait for the port enable event to occur
- ret = mInitSem.WaitTimeout(OMX_CMD_TIMEOUT);
- if ( NO_ERROR == ret ) {
- CAMHAL_LOGDA("-Port enable event arrived");
- } else {
- ret |= RemoveEvent(mCameraAdapterParameters.mHandleComp,
- OMX_EventCmdComplete,
- OMX_CommandPortEnable,
- mCameraAdapterParameters.mPrevPortIndex,
- NULL);
- CAMHAL_LOGEA("Timeout for enabling preview port expired!");
- goto EXIT;
- }
-
- // 7.Select the sensor
- OMX_CONFIG_SENSORSELECTTYPE sensorSelect;
- OMX_INIT_STRUCT_PTR (&sensorSelect, OMX_CONFIG_SENSORSELECTTYPE);
- sensorSelect.eSensor = (OMX_SENSORSELECT) mSensorIndex;
- eError = OMX_SetConfig(mCameraAdapterParameters.mHandleComp, ( OMX_INDEXTYPE ) OMX_TI_IndexConfigSensorSelect, &sensorSelect);
- if ( OMX_ErrorNone != eError ) {
- CAMHAL_LOGEB("Error while selecting the sensor index as %d - 0x%x", mSensorIndex, eError);
- return BAD_VALUE;
- } else {
- CAMHAL_LOGDB("Sensor %d selected successfully", mSensorIndex);
- }
-
- #ifdef CAMERAHAL_DEBUG
-
- printComponentVersion(mCameraAdapterParameters.mHandleComp);
-
- #endif
- // 8.初始化默认参数
- mBracketingEnabled = false;
- mZoomBracketingEnabled = false;
- mBracketingBuffersQueuedCount = 0;
- mBracketingRange = 1;
- mLastBracetingBufferIdx = 0;
- mBracketingBuffersQueued = NULL;
- mOMXStateSwitch = false;
- mBracketingSet = false;
- #ifdef CAMERAHAL_USE_RAW_IMAGE_SAVING
- mRawCapture = false;
- mYuvCapture = false;
- #endif
-
- mCaptureSignalled = false;
- mCaptureConfigured = false;
- mReprocConfigured = false;
- mRecording = false;
- mWaitingForSnapshot = false;
- mPictureFormatFromClient = NULL;
-
- mCapabilitiesOpMode = MODE_MAX;
- mCapMode = INITIAL_MODE;
- mIPP = IPP_NULL;
- mVstabEnabled = false;
- mVnfEnabled = false;
- mBurstFrames = 1;
- mBurstFramesAccum = 0;
- mCapturedFrames = 0;
- mFlushShotConfigQueue = false;
- mPictureQuality = 100;
- mCurrentZoomIdx = 0;
- mTargetZoomIdx = 0;
- mPreviousZoomIndx = 0;
- mReturnZoomStatus = false;
- mZoomInc = 1;
- mZoomParameterIdx = 0;
- mExposureBracketingValidEntries = 0;
- mZoomBracketingValidEntries = 0;
- mSensorOverclock = false;
- mAutoConv = OMX_TI_AutoConvergenceModeMax;
- mManualConv = 0;
- mDeviceOrientation = 0;
- mCapabilities = caps;
- mZoomUpdating = false;
- mZoomUpdate = false;
- mGBCE = BRIGHTNESS_OFF;
- mGLBCE = BRIGHTNESS_OFF;
- mParameters3A.ExposureLock = OMX_FALSE;
- mParameters3A.WhiteBalanceLock = OMX_FALSE;
-
- mEXIFData.mGPSData.mAltitudeValid = false;
- mEXIFData.mGPSData.mDatestampValid = false;
- mEXIFData.mGPSData.mLatValid = false;
- mEXIFData.mGPSData.mLongValid = false;
- mEXIFData.mGPSData.mMapDatumValid = false;
- mEXIFData.mGPSData.mProcMethodValid = false;
- mEXIFData.mGPSData.mVersionIdValid = false;
- mEXIFData.mGPSData.mTimeStampValid = false;
- mEXIFData.mModelValid = false;
- mEXIFData.mMakeValid = false;
-
- //update the mDeviceOrientation with the sensor mount orientation.
- //So that the face detect will work before onOrientationEvent()
- //get triggered.
- CAMHAL_ASSERT(mCapabilities);
- mountOrientationString = mCapabilities->get(CameraProperties::ORIENTATION_INDEX);
- CAMHAL_ASSERT(mountOrientationString);
- mDeviceOrientation = atoi(mountOrientationString);
-
- if (mSensorIndex != 2) {
- mCapabilities->setMode(MODE_HIGH_SPEED);
- }
-
- if (mCapabilities->get(CameraProperties::SUPPORTED_ZOOM_STAGES) != NULL) {
- mMaxZoomSupported = mCapabilities->getInt(CameraProperties::SUPPORTED_ZOOM_STAGES) + 1;
- } else {
- mMaxZoomSupported = 1;
- }
-
- // 9.initialize command handling thread
- if(mCommandHandler.get() == NULL)
- mCommandHandler = new CommandHandler(this);
-
- if ( NULL == mCommandHandler.get() )
- {
- CAMHAL_LOGEA("Couldn't create command handler");
- return NO_MEMORY;
- }
-
- ret = mCommandHandler->run("CallbackThread", PRIORITY_URGENT_DISPLAY);
- if ( ret != NO_ERROR )
- {
- if( ret == INVALID_OPERATION){
- CAMHAL_LOGDA("command handler thread already runnning!!");
- ret = NO_ERROR;
- } else {
- CAMHAL_LOGEA("Couldn't run command handlerthread");
- return ret;
- }
- }
-
- // 10.initialize omx callback handling thread
- if(mOMXCallbackHandler.get() == NULL)
- mOMXCallbackHandler = new OMXCallbackHandler(this);
-
- if ( NULL == mOMXCallbackHandler.get() )
- {
- CAMHAL_LOGEA("Couldn't create omx callback handler");
- return NO_MEMORY;
- }
-
- ret = mOMXCallbackHandler->run("OMXCallbackThread", PRIORITY_URGENT_DISPLAY);
- if ( ret != NO_ERROR )
- {
- if( ret == INVALID_OPERATION){
- CAMHAL_LOGDA("omx callback handler thread already runnning!!");
- ret = NO_ERROR;
- } else {
- CAMHAL_LOGEA("Couldn't run omx callback handler thread");
- return ret;
- }
- }
-
- OMX_INIT_STRUCT_PTR (&mRegionPriority, OMX_TI_CONFIG_3A_REGION_PRIORITY);
- OMX_INIT_STRUCT_PTR (&mFacePriority, OMX_TI_CONFIG_3A_FACE_PRIORITY);
- mRegionPriority.nPortIndex = OMX_ALL;
- mFacePriority.nPortIndex = OMX_ALL;
-
- //Setting this flag will that the first setParameter call will apply all 3A settings
- //and will not conditionally apply based on current values.
- mFirstTimeInit = true;
-
- //Flag to avoid calling setVFramerate() before OMX_SetParameter(OMX_IndexParamPortDefinition)
- //Ducati will return an error otherwise.
- mSetFormatDone = false;
-
- memset(mExposureBracketingValues, 0, EXP_BRACKET_RANGE*sizeof(int));
- memset(mZoomBracketingValues, 0, ZOOM_BRACKET_RANGE*sizeof(int));
- mMeasurementEnabled = false;
- mFaceDetectionRunning = false;
- mFaceDetectionPaused = false;
- mFDSwitchAlgoPriority = false;
-
- memset(&mCameraAdapterParameters.mCameraPortParams[mCameraAdapterParameters.mImagePortIndex], 0, sizeof(OMXCameraPortParameters));
- memset(&mCameraAdapterParameters.mCameraPortParams[mCameraAdapterParameters.mPrevPortIndex], 0, sizeof(OMXCameraPortParameters));
- memset(&mCameraAdapterParameters.mCameraPortParams[mCameraAdapterParameters.mVideoPortIndex], 0, sizeof(OMXCameraPortParameters));
- memset(&mCameraAdapterParameters.mCameraPortParams[mCameraAdapterParameters.mVideoInPortIndex], 0, sizeof(OMXCameraPortParameters));
-
- // 11.initialize 3A defaults
- mParameters3A.Effect = getLUTvalue_HALtoOMX(OMXCameraAdapter::DEFAULT_EFFECT, EffLUT);
- mParameters3A.FlashMode = getLUTvalue_HALtoOMX(OMXCameraAdapter::DEFAULT_FLASH_MODE, FlashLUT);
- mParameters3A.SceneMode = getLUTvalue_HALtoOMX(OMXCameraAdapter::DEFAULT_SCENE_MODE, SceneLUT);
- mParameters3A.EVCompensation = atoi(OMXCameraAdapter::DEFAULT_EV_COMPENSATION);
- mParameters3A.Focus = getLUTvalue_HALtoOMX(OMXCameraAdapter::DEFAULT_FOCUS_MODE, FocusLUT);
- mParameters3A.ISO = getLUTvalue_HALtoOMX(OMXCameraAdapter::DEFAULT_ISO_MODE, IsoLUT);
- mParameters3A.Flicker = getLUTvalue_HALtoOMX(OMXCameraAdapter::DEFAULT_ANTIBANDING, FlickerLUT);
- mParameters3A.Brightness = atoi(OMXCameraAdapter::DEFAULT_BRIGHTNESS);
- mParameters3A.Saturation = atoi(OMXCameraAdapter::DEFAULT_SATURATION) - SATURATION_OFFSET;
- mParameters3A.Sharpness = atoi(OMXCameraAdapter::DEFAULT_SHARPNESS) - SHARPNESS_OFFSET;
- mParameters3A.Contrast = atoi(OMXCameraAdapter::DEFAULT_CONTRAST) - CONTRAST_OFFSET;
- mParameters3A.WhiteBallance = getLUTvalue_HALtoOMX(OMXCameraAdapter::DEFAULT_WB, WBalLUT);
- mParameters3A.Exposure = getLUTvalue_HALtoOMX(OMXCameraAdapter::DEFAULT_EXPOSURE_MODE, ExpLUT);
- mParameters3A.ExposureLock = OMX_FALSE;
- mParameters3A.FocusLock = OMX_FALSE;
- mParameters3A.WhiteBalanceLock = OMX_FALSE;
-
- mParameters3A.ManualExposure = 0;
- mParameters3A.ManualExposureRight = 0;
- mParameters3A.ManualGain = 0;
- mParameters3A.ManualGainRight = 0;
-
- mParameters3A.AlgoFixedGamma = OMX_TRUE;
- mParameters3A.AlgoNSF1 = OMX_TRUE;
- mParameters3A.AlgoNSF2 = OMX_TRUE;
- mParameters3A.AlgoSharpening = OMX_TRUE;
- mParameters3A.AlgoThreeLinColorMap = OMX_TRUE;
- mParameters3A.AlgoGIC = OMX_TRUE;
-
- LOG_FUNCTION_NAME_EXIT;
- return ErrorUtils::omxToAndroidError(eError);
-
- EXIT:
-
- CAMHAL_LOGDB("Exiting function %s because of ret %d eError=%x", __FUNCTION__, ret, eError);
- performCleanupAfterError();
- LOG_FUNCTION_NAME_EXIT;
- return ErrorUtils::omxToAndroidError(eError);
- }
在完成initialize方法之后,
mCameraAdapter->registerImageReleaseCallback(releaseImageBuffers, (void *) this);
mCameraAdapter->registerEndCaptureCallback(endImageCapture, (void *)this);
这两个方法同样非常重要,首先我们这里调用的是mCameraAdapter的方法, mCameraAdapter是OMXCameraAdapter这个类的实例,但是其实 OMXCameraAdapter这个类中是没有以上这两个方法的,但是我们接着看, OMXCameraAdapter这个类的定义
class OMXCameraAdapter : public BaseCameraAdapter
OMXCameraAdapter继承于BaseCameraAdapter,不错,上面的两个方法是在 BaseCameraAdapter这个类中实现的,我们接着看看
- status_t BaseCameraAdapter::registerImageReleaseCallback(release_image_buffers_callback callback, void *user_data)
- {
- status_t ret = NO_ERROR;
-
- LOG_FUNCTION_NAME;
-
- mReleaseImageBuffersCallback = callback;
- mReleaseData = user_data;
-
- LOG_FUNCTION_NAME_EXIT;
-
- return ret;
- }
-
- status_t BaseCameraAdapter::registerEndCaptureCallback(end_image_capture_callback callback, void *user_data)
- {
- status_t ret = NO_ERROR;
-
- LOG_FUNCTION_NAME;
-
- mEndImageCaptureCallback= callback;
- mEndCaptureData = user_data;
-
- LOG_FUNCTION_NAME_EXIT;
-
- return ret;
- }
mEndImageCaptureCallback这个方法会在OMXCameraAdapter的fillThisBuffer中被调用,他的实现在
- void releaseImageBuffers(void *userData)
- {
- LOG_FUNCTION_NAME;
-
- if (NULL != userData) {
- CameraHal *c = reinterpret_cast<CameraHal *>(userData);//user_data就是指向我们实例化的OMXCameraAdapter变量mCameraAdapter
- c->freeImageBufs();//接着调用mCameraAdapter的freeImageBufs方法
- }
-
- LOG_FUNCTION_NAME_EXIT;
- }
- status_t CameraHal::freeImageBufs()
- {
- status_t ret = NO_ERROR;
-
- LOG_FUNCTION_NAME;
-
- if ( NO_ERROR == ret )
- {
-
- if( NULL != mImageBufs )
- {
-
- ///@todo Pluralise the name of this method to freeBuffers
- ret = mMemoryManager->freeBuffer(mImageBufs);//通过memoryManager释放内存
- mImageBufs = NULL;
-
- }
- else
- {
- ret = -EINVAL;
- }
-
- }
-
- LOG_FUNCTION_NAME_EXIT;
-
- return ret;
- }
二.AppCallbackNotifier的实例化和初始化
AppCallbackNotifier这个类是没有实现构造函数的,我们就先看看他的initialize方法吧
- /**
- * NotificationHandler class
- */
-
- ///Initialization function for AppCallbackNotifier
- status_t AppCallbackNotifier::initialize()
- {
- LOG_FUNCTION_NAME;
-
- mPreviewMemory = 0;
-
- mMeasurementEnabled = false;
-
- mNotifierState = NOTIFIER_STOPPED;
-
- ///Create the app notifier thread
- mNotificationThread = new NotificationThread(this);
- if(!mNotificationThread.get())
- {
- CAMHAL_LOGEA("Couldn't create Notification thread");
- return NO_MEMORY;
- }
-
- ///Start the display thread
- status_t ret = mNotificationThread->run("NotificationThread", PRIORITY_URGENT_DISPLAY);
- if(ret!=NO_ERROR)
- {
- CAMHAL_LOGEA("Couldn't run NotificationThread");
- mNotificationThread.clear();
- return ret;
- }
-
- mUseMetaDataBufferMode = true;
- mRawAvailable = false;
-
- mRecording = false;
- mPreviewing = false;
-
- LOG_FUNCTION_NAME_EXIT;
-
- return ret;
- }
这里我们看看这个很忙碌的线程都干了些什么事情,之所以说他忙碌,是因为他一直不停的等待消息,有消息就处理,不能磨叽磨叽的
![](http://blog.chinaunix.net/kindeditor/plugins/emoticons/images/30.gif)
- bool AppCallbackNotifier::notificationThread()
- {
- bool shouldLive = true;
- status_t ret;
-
- LOG_FUNCTION_NAME;
-
- //CAMHAL_LOGDA("Notification Thread waiting for message");
- ret = TIUTILS::MessageQueue::waitForMsg(&mNotificationThread->msgQ(),
- &mEventQ,
- &mFrameQ,
- AppCallbackNotifier::NOTIFIER_TIMEOUT);
-
- //CAMHAL_LOGDA("Notification Thread received message");
- //上面等待message,消息到来时开始往下运行,之后区分这些消息到底是什么消息,就像邮局收到邮件接着往下分发一样
- if (mNotificationThread->msgQ().hasMsg()) {
- ///Received a message from CameraHal, process it
- CAMHAL_LOGDA("Notification Thread received message from Camera HAL");
- shouldLive = processMessage();//先进行消息的筛选,这里跳出有问题的邮件抛弃掉,收到NOTIFIER_EXIT消息则退出
- if(!shouldLive) {
- CAMHAL_LOGDA("Notification Thread exiting.");
- return shouldLive;
- }
- }
-
- if(mEventQ.hasMsg()) {
- ///Received an event from one of the event providers
- CAMHAL_LOGDA("Notification Thread received an event from event provider (CameraAdapter)");
- notifyEvent();//分类完成就分类处理了,这里是enent 事件的处理
- }
-
- if(mFrameQ.hasMsg()) {
- ///Received a frame from one of the frame providers
- //CAMHAL_LOGDA("Notification Thread received a frame from frame provider (CameraAdapter)");
- notifyFrame();//分类完成就分类处理了,这里是frame 事件的处理
- }
-
- LOG_FUNCTION_NAME_EXIT;
- return shouldLive;
- }
- void AppCallbackNotifier::notifyEvent()
- {
- ///Receive and send the event notifications to app
- TIUTILS::Message msg;
- LOG_FUNCTION_NAME;
- {
- Mutex::Autolock lock(mLock);
- if ( !mEventQ.hasMsg() ) {
- return;
- } else {
- mEventQ.get(&msg);
- }
- }
- bool ret = true;
- CameraHalEvent *evt = NULL;
- CameraHalEvent::FocusEventData *focusEvtData;
- CameraHalEvent::ZoomEventData *zoomEvtData;
- CameraHalEvent::MetaEventData metaEvtData;
-
- if(mNotifierState != AppCallbackNotifier::NOTIFIER_STARTED)
- {
- return;
- }
-
- switch(msg.command)
- {
- case AppCallbackNotifier::NOTIFIER_CMD_PROCESS_EVENT:
-
- evt = ( CameraHalEvent * ) msg.arg1;
-
- if ( NULL == evt )
- {
- CAMHAL_LOGEA("Invalid CameraHalEvent");
- return;
- }
-
- switch(evt->mEventType)
- {
- case CameraHalEvent::EVENT_SHUTTER:
-
- if ( ( NULL != mCameraHal ) &&
- ( NULL != mNotifyCb ) &&
- ( mCameraHal->msgTypeEnabled(CAMERA_MSG_SHUTTER) ) )
- {
- mNotifyCb(CAMERA_MSG_SHUTTER, 0, 0, mCallbackCookie);
- }
- mRawAvailable = false;
-
- break;
-
- case CameraHalEvent::EVENT_FOCUS_LOCKED:
- case CameraHalEvent::EVENT_FOCUS_ERROR:
-
- focusEvtData = &evt->mEventData->focusEvent;
- if ( ( focusEvtData->focusStatus == CameraHalEvent::FOCUS_STATUS_SUCCESS ) &&
- ( NULL != mCameraHal ) &&
- ( NULL != mNotifyCb ) &&
- ( mCameraHal->msgTypeEnabled(CAMERA_MSG_FOCUS) ) ) {
- mCameraHal->disableMsgType(CAMERA_MSG_FOCUS);
- mNotifyCb(CAMERA_MSG_FOCUS, true, 0, mCallbackCookie);
- } else if ( ( focusEvtData->focusStatus == CameraHalEvent::FOCUS_STATUS_FAIL ) &&
- ( NULL != mCameraHal ) &&
- ( NULL != mNotifyCb ) &&
- ( mCameraHal->msgTypeEnabled(CAMERA_MSG_FOCUS) ) ) {
- mCameraHal->disableMsgType(CAMERA_MSG_FOCUS);
- mNotifyCb(CAMERA_MSG_FOCUS, false, 0, mCallbackCookie);
- }
-
- break;
-
- case CameraHalEvent::EVENT_ZOOM_INDEX_REACHED:
-
- zoomEvtData = &evt->mEventData->zoomEvent;
-
- if ( ( NULL != mCameraHal ) &&
- ( NULL != mNotifyCb) &&
- ( mCameraHal->msgTypeEnabled(CAMERA_MSG_ZOOM) ) )
- {
- mNotifyCb(CAMERA_MSG_ZOOM, zoomEvtData->currentZoomIndex, zoomEvtData->targetZoomIndexReached, mCallbackCookie);
- }
-
- break;
-
- case CameraHalEvent::EVENT_METADATA:
-
- metaEvtData = evt->mEventData->metadataEvent;
-
- if ( ( NULL != mCameraHal ) &&
- ( NULL != mNotifyCb) &&
- ( mCameraHal->msgTypeEnabled(CAMERA_MSG_PREVIEW_METADATA) ) )
- {
- // WA for an issue inside CameraService
- camera_memory_t *tmpBuffer = mRequestMemory(-1, 1, 1, NULL);
-
- mDataCb(CAMERA_MSG_PREVIEW_METADATA,
- tmpBuffer,
- 0,
- metaEvtData->getMetadataResult(),
- mCallbackCookie);
-
- metaEvtData.clear();
-
- if ( NULL != tmpBuffer ) {
- tmpBuffer->release(tmpBuffer);
- }
-
- }
-
- break;
-
- case CameraHalEvent::ALL_EVENTS:
- break;
- default:
- break;
- }
-
- break;
- }
-
- if ( NULL != evt )
- {
- delete evt;
- }
-
-
- LOG_FUNCTION_NAME_EXIT;
-
- }
这里还是比较重要的,但不是这篇文章的重点,之后有机会还会在说
再看一下 notifyFrame的处理过程:
算了,我还是不把他的处理过程贴出来,怕吓到人,挺庞大的,处理了很多事件,当然重要,先知道,再看吧
这里你处理了notifyEvent和notifyFrame这里消息,但是这些消息是从哪里来呢?知道了接收者,那么就必须找到发送者
mAppCallbackNotifier->setEventProvider(eventMask, mCameraAdapter);
mAppCallbackNotifier->setFrameProvider(mCameraAdapter);
不错,就是在这里指定了enent和frame消息的提供者(provider)
先看看setEventProvider的实现
- void AppCallbackNotifier::setEventProvider(int32_t eventMask, MessageNotifier * eventNotifier)
- {
-
- LOG_FUNCTION_NAME;
- ///@remarks There is no NULL check here. We will check
- ///for NULL when we get start command from CameraHal
- ///@Remarks Currently only one event provider (CameraAdapter) is supported
- ///@todo Have an array of event providers for each event bitmask
- mEventProvider = new EventProvider(eventNotifier, this, eventCallbackRelay);
- if ( NULL == mEventProvider )
- {
- CAMHAL_LOGEA("Error in creating EventProvider");
- }
- else
- {
- mEventProvider->enableEventNotification(eventMask);
- }
-
- LOG_FUNCTION_NAME_EXIT;
- }
再看看setFrameProvider的实现吧
- void AppCallbackNotifier::setFrameProvider(FrameNotifier *frameNotifier)
- {
- LOG_FUNCTION_NAME;
- ///@remarks There is no NULL check here. We will check
- ///for NULL when we get the start command from CameraAdapter
- mFrameProvider = new FrameProvider(frameNotifier, this, frameCallbackRelay);
- if ( NULL == mFrameProvider )
- {
- CAMHAL_LOGEA("Error in creating FrameProvider");
- }
- else
- {
- //Register only for captured images and RAW for now
- //TODO: Register for and handle all types of frames
- mFrameProvider->enableFrameNotification(CameraFrame::IMAGE_FRAME);
- mFrameProvider->enableFrameNotification(CameraFrame::RAW_FRAME);
- }
-
- LOG_FUNCTION_NAME_EXIT;
- }
但是这里必须分析一下FrameProvider的构造方法
- FrameProvider(FrameNotifier *fn, void* cookie, frame_callback frameCallback)
- :mFrameNotifier(fn), mCookie(cookie),mFrameCallback(frameCallback) { }
FrameProvider和EnentProvider接口的实现在CameraHalUtilClasses.cpp文件
接着往下走:Start the callback notifier
mAppCallbackNotifier->start()
- status_t AppCallbackNotifier::start()
- {
- LOG_FUNCTION_NAME;
- if(mNotifierState==AppCallbackNotifier::NOTIFIER_STARTED)
- {
- CAMHAL_LOGDA("AppCallbackNotifier already running");
- LOG_FUNCTION_NAME_EXIT;
- return ALREADY_EXISTS;
- }
-
- ///Check whether initial conditions are met for us to start
- ///A frame provider should be available, if not return error
- if(!mFrameProvider)
- {
- ///AppCallbackNotifier not properly initialized
- CAMHAL_LOGEA("AppCallbackNotifier not properly initialized - Frame provider is NULL");
- LOG_FUNCTION_NAME_EXIT;
- return NO_INIT;
- }
-
- ///At least one event notifier should be available, if not return error
- ///@todo Modify here when there is an array of event providers
- if(!mEventProvider)
- {
- CAMHAL_LOGEA("AppCallbackNotifier not properly initialized - Event provider is NULL");
- LOG_FUNCTION_NAME_EXIT;
- ///AppCallbackNotifier not properly initialized
- return NO_INIT;
- }
-
- mNotifierState = AppCallbackNotifier::NOTIFIER_STARTED;
- CAMHAL_LOGDA(" --> AppCallbackNotifier NOTIFIER_STARTED \n");
-
- gEncoderQueue.clear();
-
- LOG_FUNCTION_NAME_EXIT;
-
- return NO_ERROR;
-
- }
接着走:mAppCallbackNotifier->setMeasurements
- void AppCallbackNotifier::setMeasurements(bool enable)
- {
- Mutex::Autolock lock(mLock);
-
- LOG_FUNCTION_NAME;
-
- mMeasurementEnabled = enable;
-
- if ( enable )
- {
- mFrameProvider->enableFrameNotification(CameraFrame::FRAME_DATA_SYNC);
- }
-
- LOG_FUNCTION_NAME_EXIT;
- }
三.MemoryManager的实例化和初始化
无疑这个类跟内存有着很密切的关系,这个定义了自己的构造函数,但是这里不说了,是在大财小用了,只一条语句,直接看看他的initialize方法吧
- status_t MemoryManager::initialize() {
- if ( mIonFd == -1 ) {
- mIonFd = ion_open();
- if ( mIonFd < 0 ) {
- CAMHAL_LOGE("ion_open() failed, error: %d", mIonFd);
- mIonFd = -1;
- return NO_INIT;
- }
- }
-
- return OK;
- }
- int ion_open()
- {
- int fd = open("/dev/ion", O_RDWR);
- if (fd < 0)
- LOGE("open /dev/ion failed!\n");
- return fd;
- }
这里我不做过多说明,可以看看这个分享,同时感谢大牛的分享: http://blog.csdn.net/melody_lu123/article/details/7556820
ION与PMEM类似,管理一或多个内存池,其中有一些会在boot time的时候预先分配,以备给特殊的硬件使用(GPU,显示控制器等)。它通过ION heaps来管理这些pool。
它可以被userspace的process之间或者内核中的模块之间进行内存共享
四.SensorListener的实例化和初始化
在SensorListener的构造函数中对一些参数进行了默认初始化,这里不知说明,直接看看他的initialize方法实现
- status_t SensorListener::initialize() {
- status_t ret = NO_ERROR;
- SensorManager& mgr(SensorManager::getInstance());
-
- LOG_FUNCTION_NAME;
-
- sp<Looper> mLooper;
-
- mSensorEventQueue = mgr.createEventQueue();
- if (mSensorEventQueue == NULL) {
- CAMHAL_LOGEA("createEventQueue returned NULL");
- ret = NO_INIT;
- goto out;
- }
-
- mLooper = new Looper(false);
- mLooper->addFd(mSensorEventQueue->getFd(), 0, ALOOPER_EVENT_INPUT, sensor_events_listener, this);
-
- if (mSensorLooperThread.get() == NULL)
- mSensorLooperThread = new SensorLooperThread(mLooper.get());
-
- if (mSensorLooperThread.get() == NULL) {
- CAMHAL_LOGEA("Couldn't create sensor looper thread");
- ret = NO_MEMORY;
- goto out;
- }
-
- ret = mSensorLooperThread->run("sensor looper thread", PRIORITY_URGENT_DISPLAY);
- if (ret == INVALID_OPERATION){
- CAMHAL_LOGDA("thread already running ?!?");
- } else if (ret != NO_ERROR) {
- CAMHAL_LOGEA("couldn't run thread");
- goto out;
- }
-
- out:
- LOG_FUNCTION_NAME_EXIT;
- return ret;
- }
下一步:mSensorListener->setCallbacks(orientation_cb, this);
- void SensorListener::setCallbacks(orientation_callback_t orientation_cb, void *cookie) {
- LOG_FUNCTION_NAME;
-
- if (orientation_cb) {
- mOrientationCb = orientation_cb;
- }
- mCbCookie = cookie;
-
- LOG_FUNCTION_NAME_EXIT;
- }
- void SensorListener::handleOrientation(uint32_t orientation, uint32_t tilt) {
- LOG_FUNCTION_NAME;
-
- Mutex::Autolock lock(&mLock);
-
- if (mOrientationCb && (sensorsEnabled & SENSOR_ORIENTATION)) {
- mOrientationCb(orientation, tilt, mCbCookie);
- }
-
- LOG_FUNCTION_NAME_EXIT;
- }
- static void orientation_cb(uint32_t orientation, uint32_t tilt, void* cookie) {
- CameraHal *camera = NULL;
-
- if (cookie) {
- camera = (CameraHal*) cookie;//这个cookie(this)指向我们实例化mCameraAdapter
- camera->onOrientationEvent(orientation, tilt);//调用mCameraHal的onOrientationEvent方法
- }
-
- }
- /**
- Callback function to receive orientation events from SensorListener
- */
- void CameraHal::onOrientationEvent(uint32_t orientation, uint32_t tilt) {
- LOG_FUNCTION_NAME;
-
- if ( NULL != mCameraAdapter ) {
- mCameraAdapter->onOrientationEvent(orientation, tilt);
- }
-
- LOG_FUNCTION_NAME_EXIT;
- }
- void OMXCameraAdapter::onOrientationEvent(uint32_t orientation, uint32_t tilt)
- {
- LOG_FUNCTION_NAME;
-
- static const unsigned int DEGREES_TILT_IGNORE = 45;
-
- // if tilt angle is greater than DEGREES_TILT_IGNORE
- // we are going to ignore the orientation returned from
- // sensor. the orientation returned from sensor is not
- // reliable. Value of DEGREES_TILT_IGNORE may need adjusting
- if (tilt > DEGREES_TILT_IGNORE) {
- return;
- }
-
- int mountOrientation = 0;
- bool isFront = false;
- if (mCapabilities) {
- const char * const mountOrientationString =
- mCapabilities->get(CameraProperties::ORIENTATION_INDEX);
- if (mountOrientationString) {
- mountOrientation = atoi(mountOrientationString);
- }
-
- const char * const facingString = mCapabilities->get(CameraProperties::FACING_INDEX);
- if (facingString) {
- isFront = strcmp(facingString, TICameraParameters::FACING_FRONT) == 0;
- }
- }
-
- // direction is a constant sign for facing, meaning the rotation direction relative to device
- // +1 (clockwise) for back sensor and -1 (counter-clockwise) for front sensor
- const int direction = isFront ? -1 : 1;
-
- int rotation = mountOrientation + direction*orientation;
-
- // crop the calculated value to [0..360) range
- while ( rotation < 0 ) rotation += 360;
- rotation %= 360;
-
- if (rotation != mDeviceOrientation) {
- mDeviceOrientation = rotation;
-
- // restart face detection with new rotation
- setFaceDetectionOrientation(mDeviceOrientation);
- }
- CAMHAL_LOGVB("orientation = %d tilt = %d device_orientation = %d", orientation, tilt, mDeviceOrientation);
-
- LOG_FUNCTION_NAME_EXIT;
- }
最后一步:mSensorListener->enableSensor(SensorListener::SENSOR_ORIENTATION)
- void SensorListener::enableSensor(sensor_type_t type) {
- Sensor const* sensor;
- SensorManager& mgr(SensorManager::getInstance());
-
- LOG_FUNCTION_NAME;
-
- Mutex::Autolock lock(&mLock);
-
- if ((type & SENSOR_ORIENTATION) && !(sensorsEnabled & SENSOR_ORIENTATION)) {
- sensor = mgr.getDefaultSensor(Sensor::TYPE_ACCELEROMETER);
- CAMHAL_LOGDB("orientation = %p (%s)", sensor, sensor->getName().string());
- mSensorEventQueue->enableSensor(sensor);
- mSensorEventQueue->setEventRate(sensor, ms2ns(100));
- sensorsEnabled |= SENSOR_ORIENTATION;
- }
-
- LOG_FUNCTION_NAME_EXIT;
- }
到这里为止CameraHal的这个初始化过程完成了,这里个人感觉十分重要,其他的接口实现固然重要,但是清清楚楚的知道这个初始化过程会让你hal与上层和底层的交互先有一个大体的认知,这比你一头扎进去到处乱撞要高效很多
Android Camere Study 待续。。。。