文章目录
1.环境准备
此次搭建准备三台服务器,系统皆为CentOS Linux release 7.6.1810 (Core)
节点名称 | 节点地址 |
---|---|
k8s-Master | 192.168.204.128 |
k8s-Node1 | 192.168.204.130 |
k8s- Node2 | 192.168.204.131 |
1.1 注意事项
- master节点安装配置etcd服务,作为k8s集群主数据库,保存所有资源的信息
- 所有节点安装配置k8s服务,针对master和node分别配置各项服务
- 所有节点安装配置flannel服务,用于跨主机容器间通信
2.1 操作步骤
2.1.1 初始化操作(三台机器都需要做)
2.1.2 系统初始化
#关闭firewall
systemctl stop firewalld.service
systemctl disable firewalld.service
#关闭selinux
setenforce 0
sed -i 's/enforcing/disabled/' /etc/selinux/config
#关闭swap分区
swapoff -a
sed -ri 's/.*swap.*/#&/' /etc/fstab
#绑定hosts
[root@localhost ~]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.204.128 k8s-master
192.168.204.130 k8s-node1
192.168.204.131 k8s-node2
2.1.3 检查网络连通性
#三台服务器全部执行
ping -c1 k8s-master
ping -c1 k8s-node1
ping -c1 k8s-node2
2.1.4 将桥接的 IPv4 流量传递到 iptables 的链
#追加配置
echo "net.ipv4.ip_forward = 1">> /etc/sysctl.conf
echo "net.bridge.bridge-nf-call-ip6tables = 1">> /etc/sysctl.conf
echo "net.bridge.bridge-nf-call-iptables = 1">> /etc/sysctl.conf
echo "net.ipv6.conf.all.disable_ipv6 = 1">> /etc/sysctl.conf
echo "net.ipv6.conf.default.disable_ipv6 = 1">> /etc/sysctl.conf
echo "net.ipv6.conf.lo.disable_ipv6 = 1">> /etc/sysctl.conf
echo "net.ipv6.conf.all.forwarding = 1">> /etc/sysctl.conf
#立即生效
sysctl -p
2.1.5 安装docker
#卸载旧版本
yum remove docker docker-client docker-client-latest docker-common docker-latest docker-latest-logrotate docker-logrotate docker-engine docker-ce* -y
#安装基础依赖
yum install -y yum-utils device-mapper-persistent-data lvm2
#配置docker源
wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo -O /etc/yum.repos.d/docker-ce.repo
#安装并启动 docker
yum -y install docker-ce-18.06.1.ce-3.el7
systemctl enable docker.service
systemctl start docker.service
#查看版本
[root@k8s-master ~]# docker --version
Docker version 18.06.1-ce, build e68fc7a
#查看docker运行状态
[root@localhost ~]# systemctl status docker.service
● docker.service - Docker Application Container Engine
Loaded: loaded (/usr/lib/systemd/system/docker.service; enabled; vendor preset: disabled)
Active: active (running) since 三 2021-03-31 18:11:11 CST; 30s ago
Docs: https://docs.docker.com
Main PID: 7280 (dockerd)
CGroup: /system.slice/docker.service
└─7280 /usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock
3月 31 18:11:11 k8s-master dockerd[7280]: time="2021-03-31T18:11:11.354939836+08:00" level=info msg="Loading containers: start."
3月 31 18:11:11 k8s-master dockerd[7280]: time="2021-03-31T18:11:11.375579559+08:00" level=error msg="e56e04d95de9b030e77365f0539208360bef8b35cd...ontainer"
3月 31 18:11:11 k8s-master dockerd[7280]: time="2021-03-31T18:11:11.795605539+08:00" level=info msg="Removing stale sandbox 6ce64a8c27d18ab6f2cd...3c9e57f)"
3月 31 18:11:11 k8s-master dockerd[7280]: time="2021-03-31T18:11:11.799750708+08:00" level=warning msg="Error (Unable to complete atomic operati...ying...."
3月 31 18:11:11 k8s-master dockerd[7280]: time="2021-03-31T18:11:11.830765677+08:00" level=info msg="Default bridge (docker0) is assigned with a... address"
3月 31 18:11:11 k8s-master dockerd[7280]: time="2021-03-31T18:11:11.864931106+08:00" level=info msg="Loading containers: done."
3月 31 18:11:11 k8s-master dockerd[7280]: time="2021-03-31T18:11:11.881542895+08:00" level=info msg="Docker daemon" commit=afacb8b graphdriver(s...n=19.03.8
3月 31 18:11:11 k8s-master dockerd[7280]: time="2021-03-31T18:11:11.881657826+08:00" level=info msg="Daemon has completed initialization"
3月 31 18:11:11 k8s-master dockerd[7280]: time="2021-03-31T18:11:11.921209150+08:00" level=info msg="API listen on /var/run/docker.sock"
3月 31 18:11:11 k8s-master systemd[1]: Started Docker Application Container Engine.
Hint: Some lines were ellipsized, use -l to show in full.
#配置docker加速
mkdir -p /etc/docker
vim /etc/docker/daemon.json
{
"registry-mirrors": ["https://82m9ar63.mirror.aliyuncs.com"]
}
#重启docker
systemctl restart docker.service
2.1.6 安装nfs共享存储
# 必须先安装 nfs-utils 才能挂载 nfs 网络存储
yum install -y nfs-utils
2.1.7 配置k8s源
#卸载旧的软件包
[root@localhost ~]# yum remove -y kubelet kubeadm kubectl
已加载插件:fastestmirror, langpacks, product-id, search-disabled-repos, subscription-manager
This system is not registered with an entitlement server. You can use subscription-manager to register.
参数 kubelet 没有匹配
参数 kubeadm 没有匹配
参数 kubectl 没有匹配
不删除任何软件包
#配置K8S的yum源
cat > /etc/yum.repos.d/kubernetes.repo << EOF
[kubernetes]
name=kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF
2.1.8 安装kubeadm,kubelet和kubectl
由于版本更新频繁,这里指定1.15.0进行实验
yum install -y kubelet-1.15.0 kubeadm-1.15.0 kubectl-1.15.0
#设置成开机启动
systemctl enable kubelet
2.2 安装kubernetes Master
在192.168.204.128上执行
kubeadm init --apiserver-advertise-address=192.168.204.128 --image-repository registry.aliyuncs.com/google_containers --kubernetes-version v1.15.0 --service-cidr=10.1.0.0/16 --pod-network-cidr=10.224.0.0/16
这里需要等待一段时间,下面是正常输出的一大坨(主要看你网速快慢 嘿嘿)
rsion v1.15.0 --service-cidr=10.1.0.0/16 --pod-network-cidr=10.224.0.0/16
[init] Using Kubernetes version: v1.15.0
[preflight] Running pre-flight checks
[WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Activating the kubelet service
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [k8s-master kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.1.0.1 192.168.204.128]
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [k8s-master localhost] and IPs [192.168.204.128 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [k8s-master localhost] and IPs [192.168.204.128 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 18.502967 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.15" in namespace kube-system with the configuration for the kubelets in the cluster
[upload-certs] Skipping phase. Please see --upload-certs
[mark-control-plane] Marking the node k8s-master as control-plane by adding the label "node-role.kubernetes.io/master=''"
[mark-control-plane] Marking the node k8s-master as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: nnbkhp.4vawwyezmuio78hh
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy
Your Kubernetes control-plane has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
Then you can join any number of worker nodes by running the following on each as root:
kubeadm join 192.168.204.128:6443 --token nnbkhp.4vawwyezmuio78hh \
--discovery-token-ca-cert-hash sha256:54662ac697a50b60882ab12060e88dddb2cb20efcd94a99dcd6c1a81ca663006
按照指引,建立目录,并拷贝配置文件
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
[root@k8s-master .kube]# ls /root/.kube/config
/root/.kube/config
2.3 安装pod网络插件(CNI)
[root@k8s-master .kube]# kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/a70459be0084506e4ec919aa1c114638878db11b/Documentation/kube-flannel.yml
clusterrole.rbac.authorization.k8s.io/flannel created
clusterrolebinding.rbac.authorization.k8s.io/flannel created
serviceaccount/flannel created
configmap/kube-flannel-cfg created
daemonset.extensions/kube-flannel-ds-amd64 created
daemonset.extensions/kube-flannel-ds-arm64 created
daemonset.extensions/kube-flannel-ds-arm created
daemonset.extensions/kube-flannel-ds-ppc64le created
daemonset.extensions/kube-flannel-ds-s390x created
拉取镜像
[root@k8s-master .kube]# docker pull quay.io/coreos/flannel:v0.11.0-arm64
v0.11.0-arm64: Pulling from coreos/flannel
e3c488b39803: Pull complete
05a63128803b: Pull complete
3efb28f38731: Pull complete
71ef15dbcc6f: Pull complete
88a6c618f324: Pull complete
75dbef1b80d7: Pull complete
00e6d6cf2173: Pull complete
Digest: sha256:2e56d44d0edaff330ac83f4ab82f0099f17ad3f81ad3564c6b0e1a85d05c9dfc
Status: Downloaded newer image for quay.io/coreos/flannel:v0.11.0-arm64
查看运行状态
[root@k8s-master .kube]# kubectl get pods -n kube-system
NAME READY STATUS RESTARTS AGE
coredns-bccdc95cf-v6dcr 1/1 Running 0 12m
coredns-bccdc95cf-wbml6 1/1 Running 0 12m
etcd-k8s-master 1/1 Running 0 11m
kube-apiserver-k8s-master 1/1 Running 0 11m
kube-controller-manager-k8s-master 1/1 Running 1 11m
kube-flannel-ds-amd64-ncprb 1/1 Running 0 4m9s
kube-proxy-mbrm7 1/1 Running 0 12m
kube-scheduler-k8s-master 1/1 Running 1 11m
2.4 Node加入集群(插曲不断)
在192.168.204.130/192.168.204.131上执行kubeadm join
命令,这个在master初始化打印出的信息里会有
[root@k8s-node1 app]# kubeadm join 192.168.204.128:6443 --token nnbkhp.4vawwyezmuio78hh --discovery-token-ca-cert-hash sha256:54662ac697a50b60882ab12060e88dddb2cb20efcd94a99dcd6c1a81ca663006
[preflight] Running pre-flight checks
[WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
[kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.15" ConfigMap in the kube-system namespace
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Activating the kubelet service
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...
This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.
Run 'kubectl get nodes' on the control-plane to see this node join the cluster.
如果忘了可以通过kubeadm token list
查看token,失效的话可通过kubeadm token create
创建
查看加入是否成功
[root@k8s-master .kube]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
k8s-master Ready master 77m v1.15.0
k8s-node1 NotReady <none> 15m v1.15.0
k8s-node2 Ready <none> 43m v1.15.0
发现k8s-node2处于notready状态,查看日志
[root@k8s-master .kube]# kubectl describe nodes k8s-node1
#发现如下错误
runtime network not ready: NetworkReady=false reason:NetworkPluginNotReady message:docker: network plugin is not ready: cni config uninitialized
查看node2的/etc/cni/net.d/
下没有文件生成,使用docker images
未发现flannel镜像
解决:
#拉取镜像
docker pull quay.io/coreos/flannel:v0.11.0-arm64
#编写配置
cat <<EOF> /etc/cni/net.d/10-flannel.conf
{
"name": "cbr0",
"plugins": [
{
"type": "flannel",
"delegate": {
"hairpinMode": true,
"isDefaultGateway": true
}
},
{
"type": "portmap",
"capabilities": {
"portMappings": true
}
}
]
}
EOF
#创建配置目录
mkdir /usr/share/oci-umount/oci-umount.d -p
mkdir /run/flannel/
#编写配置
cat <<EOF> /run/flannel/subnet.env
FLANNEL_NETWORK=10.244.0.0/16
FLANNEL_SUBNET=10.224.2.1/24
FLANNEL_MTU=1450
FLANNEL_IPMASQ=true
EOF
#升级网络驱动
kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/v0.9.1/Documentation/kube-flannel.yml
然后重新注册,发现node连master一直超时,根本注册不上去(这个问题困扰比较久)
#查看系统日志
cat /var/log/message
#报错如下
Apr 1 15:33:21 k8s-node1 kubelet: E0401 15:33:21.730325 13112 controller.go:115] failed to ensure node lease exists, will retry in 7s, error: leases.coordination.k8s.io "k8s-node1" is forbidden: User "system:anonymous" cannot get resource "leases" in API group "coordination.k8s.io" in the namespace "kube-node-lease"
#经过查阅资料,发现是匿名用户权限不够
#master服务器执行
kubectl create clusterrolebinding test:anonymous --clusterrole=cluster-admin --user=system:anonymous
#后面发现注册上了,但是状态还是不对
[root@k8s-master log]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
k8s-master Ready master 178m v1.15.0
k8s-node1 NotReady <none> 3m5s v1.15.0
k8s-node2 Ready <none> 143m v1.15.0
没办法,治好继续看日志了,在日志里发现这么一个报错
Image garbage collection failed once. Stats initialization may not have completed yet: failed to get imageFs info: unable to find data in memory cache
咱也看不懂,只觉得和内存有关系,free -h
一看,内存确实剩余不多
#清理内存
echo 3 > /proc/sys/vm/drop_caches
#node清除记录
kubeadm reset
#master删除为准备的节点
kubectl delete node k8s-node1
在一次kubeadm join
,发现还是为准备,在看系统日志,发现
Unable to update cni config: No networks found in /etc/cni/net.d
这个报错就很明显了,网络问题
ll /etc/cni/net.d/10-flannel.conflist
#发现没有文件,从master拷贝
scp -P 5522 -r /etc/cni/ 192.168.204.130:/etc/
再次重新注册,发现成功了
4月 01 15:47:31 k8s-node1 kubelet[14000]: I0401 15:47:31.379357 14000 kubelet_node_status.go:72] Attempting to register node k8s-nod
4月 01 15:47:31 k8s-node1 kubelet[14000]: I0401 15:47:31.413690 14000 kubelet_node_status.go:75] Successfully registered node k8s-no
4月 01 15:47:31 k8s-node1 kubelet[14000]: I0401 15:47:31.473948 14000 reconciler.go:150] Reconciler: start to sync state
在master上查看状态
[root@k8s-master log]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
k8s-master Ready master 3h18m v1.15.0
k8s-node1 Ready <none> 10m v1.15.0
k8s-node2 Ready <none> 163m v1.15.0
哈哈,终于可以下一步了!
2.5 测试集群
集群中创建一个pod,看看是否正常运行
#创建nginx pod
[root@k8s-master log]# kubectl create deployment nginx --image=nginx
deployment.apps/nginx created
#设置端口
[root@k8s-master log]# kubectl expose deployment nginx --port=80 --type=NodePort
service/nginx exposed
#查看pod状态
[root@k8s-master log]# kubectl get pod,svc
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
service/kubernetes ClusterIP 10.1.0.1 <none> 443/TCP 3h21m
service/nginx NodePort 10.1.44.94 <none> 80:32450/TCP 27s
#查看nginx pod
[root@k8s-master ~]# kubectl get pods
NAME READY STATUS RESTARTS AGE
nginx-554b9c67f9-hpv7k 1/1 Running 0 5m53s
2.6 Dashboard表盘部署
kubectl apply -f https://raw.githubusercontent.com/kubernetes/dashboard/v1.10.1/src/deploy/recommended/kubernetes-dashboard.yaml
默认镜像国内无法访问,修改kubernetes-dashboard.yaml的镜像地址
#先下载下来
wget https://raw.githubusercontent.com/kubernetes/dashboard/v1.10.1/src/deploy/recommended/kubernetes-dashboard.yaml
#修改image地址
vim kubernetes-dashboard.yaml
:%s/k8s.gcr.io\/kubernetes-dashboard-amd64:v1.10.1/roeslys\/kubernetes-dashboard-amd64:v1.10.1
:wq!
#默认Dashboard只能集群内部访问,修改Service为NodePort类型,暴露到外部:不修改的话外部不能访问。
# ------------------- Dashboard Service ------------------- #
kind: Service
apiVersion: v1
metadata:
labels:
k8s-app: kubernetes-dashboard
name: kubernetes-dashboard
namespace: kube-system
spec:
type: NodePort
ports:
- port: 443
nodePort: 31000
targetPort: 8443
selector:
k8s-app: kubernetes-dashboard
生成pod
#生成pod
kubectl apply -f kubernetes-dashboard.yaml
#查看端口
[root@k8s-master kubernetes]# ss -nlpt|grep 31000
LISTEN 0 128 :::31000 :::* users:(("kube-proxy",pid=16248,fd=13))
#查看信息
kubectl get pods,svc -n kube-system
NAME READY STATUS RESTARTS AGE
pod/coredns-bccdc95cf-v6dcr 1/1 Running 1 3h58m
pod/coredns-bccdc95cf-wbml6 1/1 Running 1 3h58m
pod/etcd-k8s-master 1/1 Running 1 3h58m
pod/kube-apiserver-k8s-master 1/1 Running 1 3h57m
pod/kube-controller-manager-k8s-master 1/1 Running 39 3h58m
pod/kube-flannel-ds-amd64-9p2dc 1/1 Running 0 20m
pod/kube-flannel-ds-amd64-bmqwf 1/1 Running 2 3h24m
pod/kube-flannel-ds-amd64-ncprb 1/1 Running 2 3h50m
pod/kube-proxy-c2dlk 1/1 Running 1 3h24m
pod/kube-proxy-mbrm7 1/1 Running 1 3h58m
pod/kube-proxy-zwmgq 1/1 Running 0 20m
pod/kube-scheduler-k8s-master 1/1 Running 36 3h57m
pod/kubernetes-dashboard-7d75c474bb-wp7p2 0/1 ImagePullBackOff 0 13m
pod/kubernetes-dashboard-974d89547-t442f 0/1 ContainerCreating 0 30s
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
service/kube-dns ClusterIP 10.1.0.10 <none> 53/UDP,53/TCP,9153/TCP 3h59m
service/kubernetes-dashboard NodePort 10.1.142.55 <none> 443:32483/TCP 13m
创建service account并绑定默认cluster-admin管理员集群角色
[root@k8s-master kubernetes]# kubectl create serviceaccount dashboard-admin -n kube-system
serviceaccount/dashboard-admin created
[root@k8s-master kubernetes]# kubectl create clusterrolebinding dashboard-admin --clusterrole=cluster-admin --serviceaccount=kube-system:dashboard-admin
clusterrolebinding.rbac.authorization.k8s.io/dashboard-admin created
[root@k8s-master kubernetes]# kubectl describe secrets -n kube-system $(kubectl -n kube-system get secret | awk '/dashboard-admin/{print $1}')
Name: dashboard-admin-token-w22dx
Namespace: kube-system
Labels: <none>
Annotations: kubernetes.io/service-account.name: dashboard-admin
kubernetes.io/service-account.uid: 1f04e31c-bae2-42a9-aa37-a1007a50af57
Type: kubernetes.io/service-account-token
Data
====
token: eyJhbGciOiJSUzI1NiIsImtpZCI6IiJ9.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.rW6OPJuaragcM3tAiabfVdXm6UWsWi7Ki7XhHseJO8Z5UcYhIZzcO3siaKHzz2pSYy5TQhpRZ87XPE5gVqJOS1tOoA0iDOuvTPqP8RBsR7Qm3nC1INKPP3gird8ZNmGa6hHnkA_dWldVPPzC-_8TkEx2z2I_t96BRN_NgiR_hJHpMyhL0Q5zt_QN_C9EMMNmbnMuTbUZ0RUyQq9Y_4X6bxbT8DQrGJZdxfN6PoMkxgCHYUIsDV0cL951XgmuicwIFzY8tsrLHXHd1MNgi36z6_-MNuqeMZWtNy1nQOhmj9gaTeL9h4YzaDh55TrGdQn4b0o-v-yNHEfCkaWywdJXGg
ca.crt: 1025 bytes
namespace: 11 bytes
记录token
浏览器测试访问,不通
vim /usr/lib/systemd/system/docker.service
#加入ExecStartPost=/sbin/iptables -I FORWARD -s 0.0.0.0/0 -j 这句ACCEPT
[Service]
Type=notify
# the default is not to use systemd for cgroups because the delegate issues still
# exists and systemd currently does not support the cgroup feature set required
# for containers run by docker
ExecStartPost=/sbin/iptables -I FORWARD -s 0.0.0.0/0 -j ACCEPT
ExecStart=/usr/bin/dockerd
#重启docker
systemctl restart docker.service
还是不行,查看所属节点
[root@k8s-master kubernetes]# kubectl get pods --all-namespaces -o wide
kube-system kubernetes-dashboard-974d89547-t442f 0/1 CrashLoopBackOff 10 36m 10.224.2.5 k8s-node2 <none> <none>
可以看到是在node2上,登录node2
kubectl get pods
#如果遇到不能使用命令可以vim /etc/profile最下面export KUBECONFIG=/etc/kubernetes/admin.conf,文件没有的话,从master拷贝
#删除pod
kubectl delete pod kubernetes-dashboard-974d89547-ztqs6 -n kube-system
#再次查看
kubectl get pods --all-namespaces -o wide
kube-system kubernetes-dashboard-974d89547-hp5nv 1/1 Running 0 14s 10.224.2.7 k8s-node2 <none> <none>
#查看端口
[root@k8s-node2 kubernetes]# ss -nltp|grep 30001
LISTEN 0 128 :::30001 :::* users:(("kube-proxy",pid=27237,fd=13))
发现一直处在CrashLoopBackOff状态,查看日志
kubectl logs kubernetes-dashboard-974d89547-vzb2w -n kube-system