带你彻底理解 Redis 持久化

带你彻底理解 Redis 持久化

一、前言

redis作为内存数据库，在我们后端开发中应用是非常多的，尤其是在大流量背景下，redis作为缓存数据库就必不可少了。想了解redis使用场景可以移步至redis使用场景。

redis 作为内存数据库，就会存在一个致命的问题，比如宕机、停电、自然灾害等等导致redis停止服务，那么内存中的数据就会丢失，对于不重要的数据还好，但是一旦涉及到核心数据，这个是万万不能接受的。为此，redis也为我们提供了两种持久化方式，AOF和RDB持久化，既然两种持久化方式是同时提供给我们，想必这两种方式是有共存的必要性的。

请大家和我一起认识下这两个大兄弟吧~

---

二、RDB

RDB概念

RDB是一种快照存储持久化方式，也就是Snapshot快照，就是将Redis某一时刻的内存数据保存到硬盘的文件当中，默认保存的文件名为dump.rdb，是一个二进制文件，而在Redis服务器启动时，会重新加载dump.rdb文件的数据到内存当中恢复数据。

RDB 持久化开启

RDB持久化方式开启有两种，一种是自动开启，一种是手动开启；

1、手动开启

（1）save 命令

save命令是一个同步操作，在执行持久化操作的时候，会阻塞进程，其他客户端的命令会被阻塞直到同步完成。

注意：由于save命令阻塞进程，如果数据量太大，会造成阻塞，在此期间所有的命令redis-server都收不到，所以此命令慎用！

---

（2）bgsave命令

bgsave 命令是一个异步操作，执行该命令的时候会fork一个新的子进程，子进程将数据保存到RDB文件之后，子进程才会退出。

注意：执行bgsave命令的时候，只有在fork才会阻塞进程其他客户端；一般fork进程的操作是很快的。

---

2、自动开启

自动开启RDB，我们需要先看下redis的配置，打开redis.conf配置文件，查看SNAPSHOTTING标签如下：

################################ SNAPSHOTTING  ################################
#
# Save the DB on disk:
#
#   save <seconds> <changes>
#
#   Will save the DB if both the given number of seconds and the given
#   number of write operations against the DB occurred.
#
#   In the example below the behaviour will be to save:
#   after 900 sec (15 min) if at least 1 key changed
#   after 300 sec (5 min) if at least 10 keys changed
#   after 60 sec if at least 10000 keys changed
#
#   Note: you can disable saving completely by commenting out all "save" lines.
#
#   It is also possible to remove all the previously configured save
#   points by adding a save directive with a single empty string argument
#   like in the following example:
#
#   save ""

save 900 1
save 300 10
save 60 10000

# By default Redis will stop accepting writes if RDB snapshots are enabled
# (at least one save point) and the latest background save failed.
# This will make the user aware (in a hard way) that data is not persisting
# on disk properly, otherwise chances are that no one will notice and some
# disaster will happen.
#
# If the background saving process will start working again Redis will
# automatically allow writes again.
#
# However if you have setup your proper monitoring of the Redis server
# and persistence, you may want to disable this feature so that Redis will
# continue to work as usual even if there are problems with disk,
# permissions, and so forth.
stop-writes-on-bgsave-error yes

# Compress string objects using LZF when dump .rdb databases?
# For default that's set to 'yes' as it's almost always a win.
# If you want to save some CPU in the saving child set it to 'no' but
# the dataset will likely be bigger if you have compressible values or keys.
rdbcompression yes

# Since version 5 of RDB a CRC64 checksum is placed at the end of the file.
# This makes the format more resistant to corruption but there is a performance
# hit to pay (around 10%) when saving and loading RDB files, so you can disable it
# for maximum performances.
#
# RDB files created with checksum disabled have a checksum of zero that will
# tell the loading code to skip the check.
rdbchecksum yes

# The filename where to dump the DB
dbfilename dump.rdb

# The working directory.
#
# The DB will be written inside this directory, with the filename specified
# above using the 'dbfilename' configuration directive.
#
# The Append Only File will also be created inside this directory.
#
# Note that you must specify a directory here, not a file name.
dir ./

大概做一个简单的简介：

# 900s内至少达到一条写命令
save 900 1
# 300s内至少达至10条写命令
save 300 10
# 60s内至少达到10000条写命令
save 60 10000

如果想关闭：save ""

dbfilename 文件名称：dump.rdb

文件路径：dir ./

这种通过服务器配置文件触发RDB的方式，与bgsave命令类似，达到触发条件时，会forks一个子进程进行数据同步；

---

RDB 文件生成过程

1. 生成临时rdb文件，并写入数据。
2. 完成数据写入，用临时文代替代正式rdb文件。
3. 删除原来的rdb文件。

---

三、AOF

以日志的形式记录Redis每一个写操作,将Redis执行过的所有写指令记录下来（读操作不记录），只许追加文件不可以改写文件，redis启动之后会读取appendonly.aof文件来实现重新恢复数据，完成恢复数据的工作。

开启AOF

AOF模式是关闭的，开启需要我们去在配置文件redis.conf中打开；

############################## APPEND ONLY MODE ###############################

# By default Redis asynchronously dumps the dataset on disk. This mode is
# good enough in many applications, but an issue with the Redis process or
# a power outage may result into a few minutes of writes lost (depending on
# the configured save points).
#
# The Append Only File is an alternative persistence mode that provides
# much better durability. For instance using the default data fsync policy
# (see later in the config file) Redis can lose just one second of writes in a
# dramatic event like a server power outage, or a single write if something
# wrong with the Redis process itself happens, but the operating system is
# still running correctly.
#
# AOF and RDB persistence can be enabled at the same time without problems.
# If the AOF is enabled on startup Redis will load the AOF, that is the file
# with the better durability guarantees.
#
# Please check http://redis.io/topics/persistence for more information.

appendonly no

# The name of the append only file (default: "appendonly.aof")

appendfilename "appendonly.aof"

# The fsync() call tells the Operating System to actually write data on disk
# instead of waiting for more data in the output buffer. Some OS will really flush
# data on disk, some other OS will just try to do it ASAP.
#
# Redis supports three different modes:
#
# no: don't fsync, just let the OS flush the data when it wants. Faster.
# always: fsync after every write to the append only log. Slow, Safest.
# everysec: fsync only one time every second. Compromise.
#
# The default is "everysec", as that's usually the right compromise between
# speed and data safety. It's up to you to understand if you can relax this to
# "no" that will let the operating system flush the output buffer when
# it wants, for better performances (but if you can live with the idea of
# some data loss consider the default persistence mode that's snapshotting),
# or on the contrary, use "always" that's very slow but a bit safer than
# everysec.
#
# More details please check the following article:
# http://antirez.com/post/redis-persistence-demystified.html
#
# If unsure, use "everysec".

# appendfsync always
appendfsync everysec
# appendfsync no

# When the AOF fsync policy is set to always or everysec, and a background
# saving process (a background save or AOF log background rewriting) is
# performing a lot of I/O against the disk, in some Linux configurations
# Redis may block too long on the fsync() call. Note that there is no fix for
# this currently, as even performing fsync in a different thread will block
# our synchronous write(2) call.
#
# In order to mitigate this problem it's possible to use the following option
# that will prevent fsync() from being called in the main process while a
# BGSAVE or BGREWRITEAOF is in progress.
#
# This means that while another child is saving, the durability of Redis is
# the same as "appendfsync none". In practical terms, this means that it is
# possible to lose up to 30 seconds of log in the worst scenario (with the
# default Linux settings).
#
# If you have latency problems turn this to "yes". Otherwise leave it as
# "no" that is the safest pick from the point of view of durability.

no-appendfsync-on-rewrite no

# Automatic rewrite of the append only file.
# Redis is able to automatically rewrite the log file implicitly calling
# BGREWRITEAOF when the AOF log size grows by the specified percentage.
#
# This is how it works: Redis remembers the size of the AOF file after the
# latest rewrite (if no rewrite has happened since the restart, the size of
# the AOF at startup is used).
#
# This base size is compared to the current size. If the current size is
# bigger than the specified percentage, the rewrite is triggered. Also
# you need to specify a minimal size for the AOF file to be rewritten, this
# is useful to avoid rewriting the AOF file even if the percentage increase
# is reached but it is still pretty small.
#
# Specify a percentage of zero in order to disable the automatic AOF
# rewrite feature.

auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 64mb

# An AOF file may be found to be truncated at the end during the Redis
# startup process, when the AOF data gets loaded back into memory.
# This may happen when the system where Redis is running
# crashes, especially when an ext4 filesystem is mounted without the
# data=ordered option (however this can't happen when Redis itself
# crashes or aborts but the operating system still works correctly).
#
# Redis can either exit with an error when this happens, or load as much
# data as possible (the default now) and start if the AOF file is found
# to be truncated at the end. The following option controls this behavior.
#
# If aof-load-truncated is set to yes, a truncated AOF file is loaded and
# the Redis server starts emitting a log to inform the user of the event.
# Otherwise if the option is set to no, the server aborts with an error
# and refuses to start. When the option is set to no, the user requires
# to fix the AOF file using the "redis-check-aof" utility before to restart
# the server.
#
# Note that if the AOF file will be found to be corrupted in the middle
# the server will still exit with an error. This option only applies when
# Redis will try to read more data from the AOF file but not enough bytes
# will be found.
aof-load-truncated yes

# When rewriting the AOF file, Redis is able to use an RDB preamble in the
# AOF file for faster rewrites and recoveries. When this option is turned
# on the rewritten AOF file is composed of two different stanzas:
#
#   [RDB file][AOF tail]
#
# When loading Redis recognizes that the AOF file starts with the "REDIS"
# string and loads the prefixed RDB file, and continues loading the AOF
# tail.
#
# This is currently turned off by default in order to avoid the surprise
# of a format change, but will at some point be used as the default.
aof-use-rdb-preamble no

这里做一个大概的解释：

开启AOF 
appendonly yes

文件名：
appendfilename "appendonly.aof"

写入模式
客户端的每一个写操作都保存到aof文件当，这种策略很安全，但是每个写请注都有IO操作，所以也很慢。
# appendfsync always
appendfsync的默认写入策略，每秒写入一次aof文件，因此，最多可能会丢失1s的数据。
appendfsync everysec
依赖于操作系统
# appendfsync no

是否重写aof文件
no-appendfsync-on-rewrite no

写入策略

redis会将每一个收到的写命令都通过write函数追加到文件中(默认是 appendonly.aof)。

上面配置文件中，介绍了三种配置策略：

appendfsync always:每修改同步，每一次发生数据变更都会持久化到磁盘上，性能较差，但数据完整性较好。

appendfsync everysec: 每秒同步，每秒内记录操作，异步操作，如果一秒内宕机，有数据丢失。

appendfsync no:Redis不会主动调用fsync去将AOF日志内容同步到磁盘，所以这一切就完全依赖于操作系统的调试了。对大多数Linux操作系统，是每30秒进行一次fsync，将缓冲区中的数据写到磁盘上。

---

重写

随着运行时间的增长，执行的命令越来越多，会导致AOF文件越来越大，当AOF文件过大时，redis会执行重写机制来压缩AOF文件。

重写触发方式：

1、手动执行bgrewriteaof 触发AOF重写

2、在redis.conf文件中配置开启重写，

no-appendfsync-on-rewrite yes

当符合一定的条件时就会触发重写机制，默认：

auto-aof-rewrite-percentage 100  //当文件比上次重写后的文件大100%时进行重写
auto-aof-rewrite-min-size 64mb	//当文件小于64M时不进行重写

---

重写过程：

• 从主进程中fork出子进程，并拿到fork时的AOF文件数据写到一个临时AOF文件中

• 在重写过程中，redis收到的命令会同时写到AOF缓冲区和重写缓冲区中，这样保证重写不丢失重写过程中的命令

• 重写完成后通知主进程，主进程会将AOF缓冲区中的数据追加到子进程生成的文件中

• redis会原子的将旧文件替换为新文件，并开始将数据写入到新的aof文件上

---

数据恢复

当AOF开启时，Redis启动时会优先载入AOF文件来恢复数据；只有当AOF关闭时，才会载入RDB文件恢复数据。

如果AOF出现异常损坏，我们可以使用命令：redis-check-aof进行修复；

redis-check-aof --fix appendonly.aof 

---

四、一较高下

前面介绍了AOF和RDB这两种持久化方式，想必他们基本的特性和优缺点都有一定的掌握，我们进行归纳总结下：

RDB

优点：

• 与AOF方式想比，数据恢复更快
• RDB数据进行备份的时候，使用子进程，对Redis性能影响较小
• 文件比较紧凑，适合做数据备份

缺点：

• 使用save命令会造成服务器阻塞，直接数据同步完成才能接收后续请求
• 当服务器宕机的时候，会出现一段时间内数据丢失
• 当使用bgsave数据备份的时候，fork进程会短暂的阻塞进程，同时fork出来的进程也会占一部分内存；

---

AOF

优点：

• AOF可以更好的保护数据不丢失，一般AOF会以每隔1秒，如果redis进程挂掉，最多丢失1秒的数据。
• AOF以appen-only的模式写入，所以没有任何磁盘寻址的开销，写入性能非常高。
• AOF日志文件的命令通过非常可读的方式进行记录，如果操作失误，比如输入FLUSHALL，可以再AOF中删除该命令，进行数据恢复；

缺点：
（1）对于同一份文件AOF文件比RDB数据快照要大。
（2）数据恢复比较慢。

---

欢迎关注微信公众号：后台服务器开发