OSPF下的MGRE实验

实验要求

1、R1-R3-R4构建全连的MGRE环境
2、R1-R5-R6建立hub-spoke的MGRE环境，其中R1为中心
3、R1-R3...R6均存在环回网段模拟用户私网，使用OSPF使全网可达
4、其中R2为ISP路由器，仅配置IP地址

给各路由器配置接口IP以及环回地址

R1

[R1-LoopBack0]ip address 192.168.1.1 24
[R1-GigabitEthernet0/0/0]ip address 12.0.0.1 24
[R1-GigabitEthernet0/0/1]ip address 21.0.0.1 24

R3

[R3-LoopBack0]ip address 192.168.3.1 24
[R3-GigabitEthernet0/0/0]ip address 23.0.0.1 24

 R4

[R4-LoopBack0]ip address 24.0.0.1 24
[R4-LoopBack0]ip address 192.168.4.1 24
[R4-GigabitEthernet0/0/0]ip address 24.0.0.1 24

R5

[R5-LoopBack0]ip address 192.168.5.1 24
[R5-GigabitEthernet0/0/0]ip address 25.0.0.1 24

R6

[R6-LoopBack0]ip address 192.168.6.1 24
[R6-GigabitEthernet0/0/0]ip address 26.0.0.1 24

R2——ISP路由器

[ISP-GigabitEthernet0/0/0]ip address 12.0.0.2 24
[ISP-GigabitEthernet0/0/1]ip address 21.0.0.2 24
[ISP-GigabitEthernet0/0/2]ip address 23.0.0.2 24
[ISP-GigabitEthernet4/0/0]ip address 24.0.0.2 24
[ISP-GigabitEthernet4/0/1]ip address 25.0.0.2 24
[ISP-GigabitEthernet4/0/2]ip address 26.0.0.2 24

配置各路由器缺省，达到公网互通 

[R1]ip route-static 0.0.0.0 0 12.0.0.2
[R1]ip route-static 0.0.0.0 0 21.0.0.2
[R3]ip route-static 0.0.0.0 0 23.0.0.2
[R4]ip route-static 0.0.0.0 0 24.0.0.2
[R5]ip route-static 0.0.0.0 0 25.0.0.2
[R6]ip route-static 0.0.0.0 0 26.0.0.2

公网连通性测试

R1-R3-R4构建全连的MGRE环境 

[R1-Tunnel0/0/0]ip address 192.168.2.1 24
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R1-Tunnel0/0/0]source 21.0.0.1
[R1-Tunnel0/0/0]nhrp network-id 10
[R1-Tunnel0/0/0]nhrp entry multicast dynamic
[R1-Tunnel0/0/0]nhrp entry 192.168.2.3 23.0.0.1 register 
[R1-Tunnel0/0/0]nhrp entry 192.168.2.4 23.0.0.1 register

 

[R3-Tunnel0/0/0]ip address 192.168.2.3 24
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R3-Tunnel0/0/0]source 23.0.0.1
[R3-Tunnel0/0/0]nhrp network-id 10
[R3-Tunnel0/0/0]nhrp entry multicast dynamic
[R3-Tunnel0/0/0]nhrp entry 192.168.2.3 21.0.0.1 register 
[R3-Tunnel0/0/0]nhrp entry 192.168.4.1 24.0.0.1 register

[R4-Tunnel0/0/0]ip address 192.168.2.4 24
[R4-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R4-Tunnel0/0/0]source 24.0.0.1
[R4-Tunnel0/0/0]nhrp network-id 10
[R4-Tunnel0/0/0]nhrp entry multicast dynamic
[R4-Tunnel0/0/0]nhrp entry 192.168.2.1 21.0.0.1 register 

 R1-R5-R6建立hub-spoke的MGRE环境，其中R1为中心

[R1-Tunnel0/0/1]ip address 192.168.7.1 24
[R1-Tunnel0/0/1]tunnel-protocol gre p2mp 
[R1-Tunnel0/0/1]source 12.0.0.1
[R1-Tunnel0/0/1]nhrp network-id 10
[R1-Tunnel0/0/1]nhrp entry multicast dynamic

[R5-Tunnel0/0/0]ip address 192.168.7.5 24
[R5-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R5-Tunnel0/0/0]source 25.0.0.1
[R5-Tunnel0/0/0]nhrp network-id 10
[R5-Tunnel0/0/0]nhrp entry multicast dynamic
[R5-Tunnel0/0/0]nhrp entry 192.168.7.1 12.0.0.1 register 

[R6-Tunnel0/0/0]ip address 192.168.7.6 24
[R6-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R6-Tunnel0/0/0]source 26.0.0.1
[R6-Tunnel0/0/0]nhrp network-id 10
[R6-Tunnel0/0/0]nhrp entry multicast dynamic
[R6-Tunnel0/0/0]nhrp entry 192.168.7.1 12.0.0.1 register 

R1-R3...R6均存在环回网段模拟用户私网，使用OSPF使全网可达

[R1]ospf 1 router-id 1.1.1.1
[R1-ospf-1-area-0.0.0.0]network 192.168.1.0 0.0.0.255
[R1-ospf-1-area-0.0.0.0]network 192.168.2.0 0.0.0.255
[R1-ospf-1-area-0.0.0.0]network 192.168.7.0 0.0.0.255

[R3]ospf 1 router-id 3.3.3.3
[R3-ospf-1-area-0.0.0.0]network 192.168.3.0 0.0.0.255
[R3-ospf-1-area-0.0.0.0]network 192.168.2.0 0.0.0.255

[R4]ospf 1 router-id 4.4.4.4
[R4-ospf-1-area-0.0.0.0]network 192.168.4.0 0.0.0.255
[R4-ospf-1-area-0.0.0.0]network 192.168.2.0 0.0.0.255

[R5]ospf 1 router-id 5.5.5.5
[R5-ospf-1-area-0.0.0.0]network 192.168.5.0 0.0.0.255
[R5-ospf-1-area-0.0.0.0]network 192.168.7.0 0.0.0.255

[R6]ospf 1 router-id 6.6.6.6
[R6-ospf-1-area-0.0.0.0]network 192.168.6.0 0.0.0.255
[R6-ospf-1-area-0.0.0.0]network 192.168.7.0 0.0.0.255

 

 

[R3-Tunnel0/0/0]ospf network-type broadcast
[R4-Tunnel0/0/0]ospf network-type broadcast

[R1-Tunnel0/0/1]ospf network-type p2mp
[R5-Tunnel0/0/0]ospf network-type p2mp
[R6-Tunnel0/0/0]ospf network-type p2mp